46M0917 IBM Li-ion Raid Controller Battery Kit For Serveraid.
This Battery Provides An Enterprise-Grade Battery For Added Performance On High-Density Servers That Require Battery-Backed Protection. It Adds A Cost-Effective Enterprise-Grade Intelligent Battery Backup Solution To An Organizations Storage Infrastructure. With 48 Hours Of Data Retention Time While On Battery Backup, Data Is Guaranteed To Be Safe During An Emergency. The Battery Offers The Performance Advantages Of Dram As A Write Cache Medium. Serveraid M5000 Series Battery Uses A Battery Gas Gauge To Accurately Estimate The Remaining Energy Capacity Of The Battery, Similar To The Way A Cell Phone Or Laptop Computer Does. In Addition, It Offers A Monthly Learn Cycle Where Write Caching For The System Is Turned Off So That The Battery Can Be Discharged And Recharged In Order To Recalibrate The Gauge.
- Product Type: Raid Controller Battery
- Battery Rechargeable: Yes
- Battery Size: Proprietary
- Battery Chemistry: Lithium Ion (Li-Ion)
- Maximum Battery Run Time: 48 Hour.
About New Bulk Pack Products
Computer servers have RAID controllers. RAID is a short form for Redundant Array Independent Disk that sits between the operating system and data storage devices. As the name suggests, RAID provides redundancy and improves the performance of disk storage devices. RAID controllers virtualize the storage drives into different groups that possess both data protection and redundancy features.
Why Do RAID Controllers Need Batteries?
Any RAID Controller should have a battery to avoid data loss when there is a power outage on the mainline. The batteries can be smart cache, capacitors, or lithium-ion batteries. When the main power goes out before the data write to the cache is completed, it can be lost. As a result, controllers, not necessarily RAID controllers, switch to the backup battery to complete the write sequence. You should ensure that the battery controller is in good working condition.
Controller Battery by Voltage
Different servers have different controller models. That means that the controller batteries also must have varying specifications. Apart from the physical size, the voltage rating is a crucial factor to consider. There are different battery ratings for different systems. For example, you will need 4.3V batteries for DL580 servers and 4.8V batteries for P-series controllers. Similarly, the 7.2V battery is for HP ProLiant BI460C servers. Check the voltage rating of the controller battery to ensure that it matches that which your system has. Any deviation can lead to costly disasters.
Battery Controller for Different Applications
Controller batteries are application-specific. You can only shop for a new battery after knowing the target device. Otherwise, it will just be a waste of time and resources. Dell PERC controller batteries are for PowerEdge servers, and HP controller batteries are for P-series servers. You cannot exchange the tow or any other battery controller. As a piece of advice, always consult with technical experts if not sure about the controller battery you need to buy.
Excellent Shopping Experience at AllHDD
ALLHDD is a one-stop shop for all controller batteries. If you need to replace any of your batteries, regardless of the model, just shop with us. We have a collection of high-quality and original controller batteries for every computer. Being a certified supplier, you can trust products we sell as meeting the industry standards and have a manufacturer's warranty.
We also have a technical team to help you with shopping. Just contact us for the help you deserve. We are here to serve you!