ASA-SSP-20-INC Cisco ASA 5585-X Security appliance Refurbished

The Cisco ASA 5585-X Security appliance is a high-performance security appliance designed for enterprise and data center networks. It supports various security features such as firewall, VPN, intrusion prevention system (IPS), and application control.

Implementing redundancy and high availability of the ASA-SSP-20-INC module in Cisco ASA 5585-X Security appliance involves configuring two identical modules in an active-standby mode. In this mode, the active module handles all the traffic and the standby module remains idle and monitors the active module. If the active module fails, the standby module takes over the traffic handling seamlessly, without interrupting the network operations.

Here are the steps to configure redundancy and high availability of the ASA-SSP-20-INC module:

• Install the second ASA-SSP-20-INC module in the secondary slot of the ASA 5585-X chassis.
• Connect the modules with the failover cable. This cable connects the failover interfaces of both modules and allows them to communicate with each other.
• Assign IP addresses to the failover interfaces of both modules.
• Configure the failover settings on both modules. This involves specifying the active and standby roles, failover interface IP addresses, and the failover link settings.
• Configure the synchronization settings. This involves configuring the synchronization interface, which is used for replicating the configuration and connection state information between the active and standby modules.
• Verify the failover configuration by testing the failover scenario. This involves simulating a failure of the active module and verifying that the standby module takes over the traffic handling without any interruption.
• Monitor the failover status by using the show failover command, which displays the current failover state and the status of the interfaces and connections.

The Cisco ASA 5585-X is a high-performance security appliance designed to provide advanced network security services, including firewall, VPN, and intrusion prevention. The ASA-SSP-20-INC is a module for the ASA 5585-X that provides additional security capabilities, including advanced threat protection, application visibility and control, and network access control.

To maximize network uptime and availability with the ASA-SSP-20-INC, organizations can implement the following best practices:

• High Availability Configuration: The ASA 5585-X can be configured in a High Availability (HA) mode to ensure that in the event of a hardware failure, the secondary ASA device can take over immediately and continue to provide network services with minimal disruption. Additionally, the ASA can be configured to support stateful failover, which ensures that the secondary ASA device has the same configuration and state information as the primary device.
• Redundant Power Supplies: The ASA 5585-X can be equipped with redundant power supplies to ensure that the device can continue to operate even in the event of a power supply failure.
• Regular Software Updates: Cisco provides regular software updates for the ASA 5585-X to address security vulnerabilities and improve performance. Organizations should regularly apply these updates to ensure that their devices are secure and operating at optimal performance levels.
• Real-time Monitoring: Real-time monitoring of network traffic, device performance, and security events can help organizations identify and resolve issues before they impact network availability. The ASA 5585-X supports a range of monitoring tools, including syslog, SNMP, and NetFlow.
• Load Balancing: Organizations can use load balancing techniques to distribute network traffic across multiple ASA devices to ensure that no single device is overwhelmed by traffic, which can lead to downtime and reduced network availability.
• Disaster Recovery Planning: Organizations should have a disaster recovery plan in place that outlines the steps to be taken in the event of a catastrophic failure. The plan should include backup and restore procedures for critical data and network configurations, as well as procedures for restoring network services in the event of a device failure.

The Cisco ASA 5585-X Security Appliance is a high-performance firewall appliance designed for large enterprise networks and data centers. The ASA-SSP-20-INC module is an optional hardware component that provides additional processing power and memory to the appliance, enabling it to handle even more complex network security challenges.

Here are some of the ways the ASA-SSP-20-INC can help overcome network challenges:

• High-performance processing: The ASA-SSP-20-INC provides additional processing power and memory to the appliance, which can help it process and analyze network traffic more quickly and efficiently. This is particularly important in large enterprise networks where there is a high volume of traffic that needs to be inspected for potential security threats.
• Advanced threat detection: The ASA-SSP-20-INC supports advanced threat detection features such as intrusion prevention system (IPS), malware protection, and content filtering. These features can help identify and prevent potential security threats before they can cause damage to the network.
• Scalability: The ASA-SSP-20-INC can be added to the Cisco ASA 5585-X Security Appliance to increase its capacity and scalability. This means that as the network grows and evolves, the appliance can easily be upgraded to handle the additional traffic and security requirements.
• Flexibility: The ASA-SSP-20-INC supports a variety of deployment options, including transparent mode and routed mode. This means that it can be deployed in a wide range of network environments and configurations, making it a flexible and versatile solution for enterprise networks.
• Management and monitoring: The ASA-SSP-20-INC can be managed and monitored using the Cisco Adaptive Security Device Manager (ASDM) or the Cisco Security Manager (CSM) software. These management tools provide a centralized and intuitive interface for configuring, monitoring, and troubleshooting the appliance.

• Manufacturer: Cisco Systems, Inc
• Manufacturer Part Number: ASA-SSP-20-INC
• Brand Name: Cisco
• Device Type: Security appliance

Networking

• Form Factor: Plug-in module
• Ports Qty: 8
• Connectivity: Technology Wired
• Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
• Features: Firewall protection, VPN support

Expansion / Connectivity

• Expansion Slots 2 (total) / 2 (free) x SFP+
• Interfaces 2 x 1000Base-T (management) - RJ-45 ¦ 2 x USB 2.0 - Type A ¦ 1 x management - RJ-45 ¦ 1 x management ¦ 8 x 1000Base-T - RJ-45
• Compatible Slots 1 x expansion slot

Processor / Memory / Storage

• RAM: 12 GB
• Flash Memory: 2 GB

Environmental Parameters

• Min Operating Temperature: 32 °F
• Max Operating Temperature: 104 °F
• Humidity Range Operating: 10 - 90% (non-condensing)

Miscellaneous

• Compliant Standards CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, EN50082-1, AS/NZS 60950-1, ICES-003 Class A, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60950-1, GB 4943