Cisco CAB-C13-C14-2M Power Interconnect Cable 2 Meter New

In the world of networking and information technology, cables are the unsung heroes that enable the seamless flow of data and power, connecting various devices together. One such essential component is the Cisco CAB-C13-C14-2M 2 Meter Power Interconnect Cable, designed to provide power connectivity for network switches. In this comprehensive guide, we will delve into the details of this particular cable, explaining its specifications, features, and uses. Whether you're an IT professional or simply curious about the technology that powers your network equipment, this article will provide you with a deep understanding of the Cisco CAB-C13-C14-2M cable. The Cisco CAB-C13-C14-2M cable is a specific type of power interconnect cable used in network setups. It is designed to connect a device with a C13 female connector to a power source with a C14 male connector. The 2-meter length of this cable provides flexibility in arranging and connecting various devices in a network setup.

Before we dive into the details, let's understand what the C13 female and C14 male connectors are.

• C13 Female Connector: The C13 connector is a common type of electrical connector used for power cables. It is designed to connect to devices such as computers, servers, and networking equipment. The C13 female connector has three round pins and is commonly found on the power supplies of many IT devices.
• C14 Male Connector: The C14 connector is the counterpart to the C13. It is designed to plug into C13 female connectors and is often found on power distribution units (PDUs), power strips, and wall outlets. The C14 male connector also has three pins, which match the configuration of the C13 female connector.

The Cisco CAB-C13-C14-2M cable is built to operate within specific voltage and current ratings. Understanding these ratings is crucial for ensuring the safe and efficient functioning of your network equipment.

• Voltage Rating: The Cisco CAB-C13-C14-2M cable is rated for use in power systems with a voltage range of 110 to 220 volts AC (Alternating Current). This means it can safely operate in regions where the standard voltage supply falls within this range.
• Current Rating: The cable is rated to carry a maximum current of 16 amperes (A). The current rating is important because it determines the maximum load the cable can handle without overheating or causing electrical issues.

To fully understand the utility of this cable, it's essential to explore its key features.

The 2-meter (approximately 6.6 feet) length of the cable provides ample flexibility when connecting devices that may not be located in close proximity to the power source. This length allows for neat and organized cable management in a network setup.

The cable comes in a sleek black color, which is not only aesthetically pleasing but also practical for use in various environments. The black color helps prevent the cable from looking dirty or disheveled over time, especially in data centers and server rooms.

The Cisco CAB-C13-C14-2M cable is designed to be compatible with a wide range of networking equipment, including Cisco network switches. This compatibility ensures that the cable can be seamlessly integrated into your existing network infrastructure.
Durability: The cable is built to withstand the rigors of data center and networking environments. It is designed to be durable and long-lasting, reducing the need for frequent replacements.

Now that we understand the specifications and features of the Cisco CAB-C13-C14-2M cable, let's explore its common use cases.

One of the primary uses of this cable is to provide power to network switches. Network switches play a crucial role in directing network traffic, and a reliable power source is essential to keep them running without interruptions.

Data centers are hubs of computing and networking equipment. The Cisco CAB-C13-C14-2M cable is commonly used in data centers to ensure that critical network equipment, servers, and other devices remain powered up and operational.

In smaller-scale setups like server rooms, this cable is often employed to connect servers and networking equipment to power sources. Its 2-meter length allows for versatile placement of devices within the room.

Many networking devices are designed to be rack-mounted. This cable is suitable for connecting such equipment to power distribution units (PDUs) mounted within server racks.

While it's commonly used in enterprise environments, this cable can also be employed in home offices and small businesses where network switches and related equipment are used.

To ensure the safe and efficient use of the Cisco CAB-C13-C14-2M cable, follow these best practices:

• Verify Compatibility: Before using the cable, make sure it is compatible with your network switch or other devices. Check the device's power input requirements to confirm that it uses a C13 female connector.
• Check Voltage and Current Ratings: Ensure that the voltage supply falls within the 110-220 volt AC range. Exceeding this range can result in damage to the cable and connected equipment. Similarly, do not exceed the 16 A current rating to prevent overheating.
• Secure Connections: When connecting the cable, ensure that it is securely plugged into the C13 female connector of the device and the C14 male connector of the power source. Loose connections can lead to power interruptions and potential hazards.
• Avoid Overloading: Be cautious not to overload the cable with devices that collectively draw more current than the cable's 16 A rating. Overloading can cause the cable to overheat and potentially lead to electrical issues.
• Cable Management: Use cable management techniques to keep the cable neatly organized. Proper cable management not only enhances the appearance of your setup but also improves airflow and maintenance.
• Regular Inspections: Periodically inspect the cable for any signs of wear, damage, or fraying. If you notice any issues, replace the cable promptly to avoid potential hazards.

Safety Considerations

Safety should always be a top priority when working with electrical equipment and cables. Here are some safety considerations when using the Cisco CAB-C13-C14-2M cable:

• Unplug Safely: When disconnecting the cable, ensure that you unplug it safely from both the device and the power source. This prevents any electrical shock hazards.
• Avoid Cable Damage: Do not pinch, crush, or bend the cable excessively. Avoid running it through tight spaces or under heavy equipment, as this can damage the cable and expose internal wires.
• Proper Ventilation: Ensure that the cable and connected devices have proper ventilation to prevent overheating. Overheating can lead to performance issues and potential safety hazards.
• Fire Safety: Keep the cable away from heat sources and flammable materials. In case of a fire emergency, the cable should not obstruct access to fire extinguishers or emergency exits.
• Professional Installation: For complex setups or when dealing with high-voltage equipment, it's advisable to seek professional installation services to ensure safety and compliance with local regulations.

Alternatives and Variations

While the Cisco CAB-C13-C14-2M cable is a reliable choice for many networking setups, there are alternatives and variations available in the market. These alternatives may have different lengths, colors, or connector types, allowing you to choose the one that best suits your specific needs.

• Different Lengths: Depending on your setup, you might require cables of different lengths. Some manufacturers offer variations of this cable in lengths ranging from 1 meter to 5 meters or more.
• Color Options: If the black color of the Cisco CAB-C13-C14-2M cable doesn't match your aesthetic preferences or specific requirements, you can find cables in various colors, including white, gray, and blue.
• Connector Types: In addition to C13 and C14 connectors, there are other connector types like C15 and C16, which are designed to handle higher temperatures. Consider the specific needs of your devices when choosing a cable with the appropriate connector type.
• High-Current Cables: If your equipment requires more power than the 16 A current rating of the Cisco CAB-C13-C14-2M cable, you can explore high-current alternatives that can handle greater loads.

• Manufacturer: Cisco
• Model Number or SKU# CAB-C13-C14-2M
• Product Type: Cable

• Connector on First End: 1 x IEC 60320 C13 Female
• Connector on Second End: 1 x IEC 60320 C14 Male
• Cord Length: 6.56 ft
• Color: Black
• Voltage Rating: 110 V AC, 220 V AC
• Current Rating: 16 A
• Device Supported: Network Switch
• Compatibility: Cisco Nexus 2000 Series FEX Switches
• Frequency: 60 Hz, 50 Hz

In summary, In the world of networking and information technology, the Cisco CAB-C13-C14-2M 2 Meter Power Interconnect Cable is a fundamental component that enables the seamless operation of network switches, servers, and other critical equipment. This cable, with its C13 female and C14 male connectors, voltage and current ratings, and durability, provides a reliable power connection for various devices in data centers, server rooms, and even home offices.

Understanding the specifications, features, and common use cases of the Cisco CAB-C13-C14-2M cable is essential for IT professionals, network administrators, and anyone dealing with networking equipment. By following safety guidelines and best practices, you can ensure the safe and efficient use of this cable in your network infrastructure.

As technology continues to evolve, cables like the Cisco CAB-C13-C14-2M remain indispensable in keeping our interconnected world powered and operational. Whether you're upgrading your network setup or building a new one from scratch, having the right power interconnect cable is crucial for the success and reliability of your network.