IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway New

The IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway is designed to operate in harsh industrial environments while providing advanced security features to protect critical industrial systems and processes. Here are some of the advanced security features offered by this device:

• Network Segmentation: The IC3000-2C2F-K9 supports network segmentation, which is the practice of dividing a network into smaller, isolated sub-networks. This helps to reduce the risk of unauthorized access and potential damage to critical industrial systems.
• Firewall: The IC3000-2C2F-K9 includes a firewall that can be configured to block or allow traffic based on various criteria, such as source or destination IP addresses, port numbers, or protocol type.
• VPN: The IC3000-2C2F-K9 supports Virtual Private Network (VPN) connections, which provide secure remote access to industrial networks over the internet. VPN connections can be configured to use encryption and authentication to protect data in transit.
• Access Control: The IC3000-2C2F-K9 offers granular access control capabilities, allowing administrators to define user roles and permissions for accessing the device and the industrial network.
• Intrusion Detection and Prevention: The IC3000-2C2F-K9 includes intrusion detection and prevention capabilities, which can detect and prevent attacks on industrial networks and systems. The device can detect and block network traffic that matches known attack patterns or signatures.
• Secure Boot: The IC3000-2C2F-K9 includes secure boot capabilities, which ensure that only authorized firmware can be loaded onto the device. This helps to prevent unauthorized access or tampering of the device's software.
• Secure Communications: The IC3000-2C2F-K9 supports secure communication protocols such as Secure Sockets Layer (SSL) and Transport Layer Security (TLS), which encrypt data in transit between the device and other industrial systems.
• Trusted Platform Module: The IC3000-2C2F-K9 includes a Trusted Platform Module (TPM), which provides hardware-based security features, such as secure storage of cryptographic keys and digital certificates.
• Advanced Threat Protection: The IC3000-2C2F-K9 can be integrated with Cisco's Advanced Malware Protection (AMP) for Networks solution, which provides real-time threat intelligence and advanced malware detection capabilities.

In conclusion, the IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway offers advanced security features to help protect critical industrial systems and processes. By leveraging these security features, administrators can implement a robust security strategy that protects against both internal and external threats.

The IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway can be managed and monitored using various tools and methods. Here are some key aspects of management and monitoring for this industrial compute gateway:

• Command Line Interface (CLI): The IC3000-2C2F-K9 appliance can be managed and monitored using the Command Line Interface (CLI). This interface provides access to advanced configuration options, monitoring tools, and troubleshooting commands.
• Industrial Network Director: Cisco Industrial Network Director is a centralized management tool that can be used to manage multiple Cisco industrial devices, including the IC3000-2C2F-K9. This tool provides a graphical interface for configuring policies, managing devices, and monitoring device health.
• SNMP Management: Simple Network Management Protocol (SNMP) can be used to monitor and manage the IC3000-2C2F-K9 appliance. SNMP allows administrators to monitor device performance, track network utilization, and receive notifications of system events.
• Logging and Reporting: The IC3000-2C2F-K9 appliance can generate detailed logs of all network traffic it processes, including information on detected threats and events. These logs can be exported for further analysis or integrated with third-party security information and event management (SIEM) solutions.
• Security Features: The IC3000-2C2F-K9 appliance offers a range of security features that can be managed and monitored, including firewall policies, access control lists, and VPN configurations. Administrators can monitor the effectiveness of these security features and adjust policies as needed.
• Industrial Protocol Monitoring: The IC3000-2C2F-K9 appliance can monitor and inspect industrial protocols used in manufacturing and other industrial settings, such as Modbus, Ethernet/IP, and Profinet. This monitoring can help detect anomalies and potential threats to industrial systems.
• Redundancy and High Availability: The IC3000-2C2F-K9 appliance can be deployed in a redundant configuration, where two or more appliances are deployed in an active-passive configuration. This configuration ensures that if one appliance fails, the other appliance will take over without any disruption to the network.
• Performance Monitoring: The IC3000-2C2F-K9 appliance can be monitored for performance metrics, such as CPU and memory utilization. This monitoring can help identify potential performance issues and optimize the appliance for maximum efficiency.

In conclusion, the IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway can be managed and monitored using a range of tools and methods. By leveraging these tools and methods, administrators can configure and optimize the appliance for effective network security and performance while ensuring high availability and industrial protocol monitoring.

The IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway is designed to operate in harsh industrial environments, and may encounter several issues during its operation. Here are some of the common issues that administrators may encounter while using the IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway, and troubleshooting steps to resolve them:

• Power Issues: The IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway may not power up, or may shut down unexpectedly. To troubleshoot this issue, check the power source, ensure that the power cable is securely plugged in, and check the power supply.
• Connectivity Issues: The IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway may not connect to the network or other devices. To troubleshoot this issue, check the network cable, switch port, and network settings.
• Software Issues: The IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway may encounter software issues, such as configuration errors or software conflicts. To troubleshoot this issue, check the system logs, and review the configuration settings to identify any errors.
• Performance Issues: The IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway may experience slow performance or may become unresponsive. To troubleshoot this issue, check the CPU and memory utilization, and identify any resource-intensive applications or processes.
• Industrial Protocol Issues: The IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway may encounter issues with industrial protocols, such as Modbus or DNP3. To troubleshoot this issue, check the protocol configuration settings, and ensure that the gateway is properly configured for the specific protocol.
• Security Issues: The IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway may encounter security issues, such as unauthorized access or data breaches. To troubleshoot this issue, review the security logs, and review the access control policies to identify any vulnerabilities.
• Hardware Issues: The IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway may experience hardware issues, such as a malfunctioning hard drive or fan failure. To troubleshoot this issue, run system diagnostics, and check the hardware components for any signs of damage or failure.

In conclusion, troubleshooting common issues with the IC3000-2C2F-K9 Cisco IC3000 Industrial Compute Gateway requires a systematic approach to identify the root cause of the issue. By following best practices for troubleshooting, administrators can resolve issues quickly and ensure the proper functioning of the gateway in industrial environments.

• Manufacturer : Cisco
• Model Number or SKU# IC3000-2C2F-K9
• Device Type : Gateway

• Number of Ports: 4
• Form Factor : Din Rail Mountable
• Connectivity Technology : Wired
• Data Link Protocol : Ethernet, Fast Ethernet, Gigabit Ethernet
• Status Indicators : System, Alarm, Console, Management
• Features : Reset Button, Fanless, Low Power Consumption

• Power Device : Internal Power Supply
• Max Supported Qty : 2
• Voltage Required : Dc 12/24/48
• Power Consumption Operational : 24 Watt

• Mtbf : 376,580 Years
• Compliant Standards : Cispr 22 Class A, Cispr 24, Nom, En55024, En 61000-6-1, En 61000-4-4, En 61000-4-2, En 61000-4-3, En 61000-4-6, Ices-003 Class A, En 61000-4-5, En 61000-6-2, En 61000-4-8, Iec 60950-1, En 60950-1, En 61000-6-4, Ul 508, En 61131-2, En 61000-4-9, En 61000-4-29, Ul 61010-1, En 50121-4, Vcci Class A, Kn22, Kn24, Nema Ts-2, En 50121-3-2, En 61326, Cispr 11 Class A, En 61000-4-18, Iec 61850-3, En 55022 Class A, Fcc Cfr47 Part 15 A, Ieee 1613, Cns 13438 Class A, En 50155, Ul/csa60950-1, As/nzs Cispr 24, Nom-019-scfi, En 60079-15, Cb 60950-1, Iec 60079-0, Iec 60079-15, En 60079-0, Can/csa C22.2 No. 213, Ul 121201, Ul/csa 61010-2-201, Ul/csa 60079-0

Expansion / Connectivity

• 1 X Console - Rj-45
• 1 X Management - Rj-45
• 1 X Console - Mini-usb
• 2 X Usb
• 2 X 1000base-t - Rj-45
• 2 X - Sfp (mini-gbic)