The PA-5EFL Cisco 5 Ports Ethernet Port Adapter can be managed using the following options:
- Command-line interface (CLI): The most common and powerful way to manage Cisco devices is through the CLI. The PA-5EFL can be configured and managed through the router's CLI using commands such as "configure terminal," "interface [interface number]," and "show interface."
- Simple Network Management Protocol (SNMP): SNMP is a protocol used for managing and monitoring network devices. The PA-5EFL supports SNMP, and you can use SNMP commands to configure and monitor the module remotely.
- CiscoWorks: CiscoWorks is a network management tool that can be used to manage and monitor Cisco devices. The PA-5EFL can be configured and monitored using CiscoWorks.
- Cisco Prime Infrastructure: Cisco Prime Infrastructure is another network management tool that can be used to manage and monitor Cisco devices. The PA-5EFL can be configured and monitored using Cisco Prime Infrastructure.
- Web-based graphical user interface (GUI): Some Cisco devices support web-based GUIs, which provide an easy-to-use interface for configuring and managing the device. However, the PA-5EFL does not support a web-based GUI.
To install the PA-5EFL Cisco 5 Ports Ethernet Port Adapter, follow the steps below:
- Turn off the power to the Cisco router.
- Locate an available port adapter slot on the router and remove the blank faceplate from the slot.
- Align the adapter with the slot and insert it firmly into the slot until it clicks into place.
- Secure the adapter to the chassis using the screws provided with the adapter.
- Reconnect all cables to the adapter.
- Power on the router.
Once the adapter is installed, you can configure it by following these steps:
- Log in to the router's command-line interface (CLI).
- Enter the configuration mode by typing "configure terminal."
- Enter the interface configuration mode by typing "interface [interface number]" (replace [interface number] with the number of the interface on the adapter that you want to configure).
- Configure the interface settings, such as the IP address, subnet mask, and default gateway.
- Repeat steps 3-4 for each interface on the adapter that you want to configure.
- Save the configuration changes by typing "write memory."
- Verify the configuration by typing "show interface" command.
To configure the PA-5EFL Cisco 5 Ports Ethernet Port Adapter, follow the steps below:
- Shut down the router and disconnect all cables.
- Locate the port adapter slot on the router and remove the blank faceplate from the slot.
- Carefully insert the port adapter into the slot, aligning the connector with the slot.
- Push the port adapter firmly into the slot until it clicks into place.
- Reconnect all cables to the port adapter.
- Power on the router.
To configure the port adapter, follow the steps below:
- Log in to the router's command-line interface (CLI).
- Enter the configuration mode by typing "configure terminal."
- Enter the interface configuration mode by typing "interface [interface number]" (replace [interface number] with the number of the interface on the port adapter that you want to configure).
- Configure the interface settings, such as the IP address, subnet mask, and default gateway.
- Set up the Ethernet port settings, such as the speed, duplex mode, and media type.
- Repeat steps 3-5 for each interface on the port adapter that you want to configure.
- Save the configuration changes by typing "write memory."
- Verify the configuration by typing "show interface" and "show interfaces status" commands.
- Manufacturer: Cisco Systems, Inc
- Manufacturer Part Number: PA-5EFL
- Brand Name: Cisco
- Product Name: 5-Port Ethernet Fiber Link Port Adapter
- Product Type: Port Adapter
- Application/Usage: Data Networking
- Interfaces / Ports:
- Interfaces/Ports Details: 5 x ST 10Base-FL
- Media Type Supported: Optical Fiber
- Fiber Optic Cable Standard: 62.5/125 µm
- Fiber Mode Supported: Multi-mode
- Maximum Data Transfer Rate: 10 Mbit/s
- Additional Information-
- Spare Product
- Signaling method: Baseband
- Topology: Star
- Cisco Catalyst VIP2-15
- Cisco Catalyst VIP2-40
- Cisco Catalyst 5000 Series Switches
- Cisco Cisco 7200 Series Routers
Cisco Second-generation VIP2 modules in all Cisco 7500 Series Routers and Cisco 7000 Series Routers with the 7000 series Route Switch Processor (RSP7000) and 7000 series Chassis Interface (RSP7000CI)
About Refurbished Products
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
