High Performance of Transceiver
Cisco 10GBPS SFP+ Multi-Mode Fiber Transceiver is a high-performance device that is used to transmit and receive data over fiber optic cables at a rate of 10 gigabits per second. It is designed to support a wide range of networking applications, including data center networking, enterprise networking, and service provider networking. The transceiver is compatible with a variety of multi-mode fiber optic cables and can support distances of up to 550 meters. It is generally considered to be a reliable and high-performance solution for transmitting data over fiber optic cables at high speeds.
Advantages of using a Multi-Mode Fiber Transceiver
The SFP-10G-SR= Cisco 10Gbps SFP+ Multi-Mode Fiber 850nm Transceiver is a small form-factor pluggable (SFP+) module used for high-speed data transmission over multi-mode fiber optic cabling. Here are some advantages of using this transceiver:
- High-speed connectivity: The SFP-10G-SR= supports 10 gigabit per second (Gbps) data transfer rates, which is ideal for high-speed connectivity in data centers and enterprise networks.
- Long-distance transmission: The SFP-10G-SR= can transmit data up to 300 meters over multi-mode fiber optic cabling. This makes it suitable for use in large data centers or buildings where long distance connectivity is required.
- Multi-mode fiber compatibility: The SFP-10G-SR= is designed for use with multi-mode fiber optic cabling, which is less expensive than single-mode fiber optic cabling. This makes it a cost-effective solution for high-speed connectivity.
- Easy installation: The SFP-10G-SR= is a hot-swappable module, which means it can be inserted or removed from a device without having to power down the device. This makes it easy to install and replace in the field.
- Cisco compatibility: The SFP-10G-SR= is designed specifically for use with Cisco networking equipment, ensuring seamless integration and compatibility with Cisco devices.
- Low power consumption: The SFP-10G-SR= is designed with low power consumption in mind, making it an energy-efficient solution for high-speed connectivity.
Factors to consideration of 10GBPS Transceiver
The SFP-10G-SR= Cisco 10GBPS SFP+ Multi-Mode Fiber 850nm Transceiver is a high-speed, hot-swappable transceiver that can be used in a variety of networking environments. When considering this transceiver, there are several factors to keep in mind:
- Compatibility: The SFP-10G-SR= is designed to work with Cisco networking equipment, so it is important to ensure that your network equipment is compatible with this transceiver.
- Data transfer rate: This transceiver supports a data transfer rate of up to 10Gbps, which makes it ideal for high-bandwidth applications such as video streaming, large file transfers, and virtualization.
- Fiber type: The SFP-10G-SR= is designed for use with multi-mode fiber, which is typically used for short-distance transmissions within a building or data center. If you need to transmit data over longer distances, you may need to consider a different transceiver that supports single-mode fiber.
- Wavelength: The SFP-10G-SR= uses a wavelength of 850nm, which is ideal for multi-mode fiber transmissions. It is important to ensure that your fiber infrastructure is compatible with this wavelength.
- Temperature range: The SFP-10G-SR= is designed to operate within a certain temperature range, so it is important to ensure that the environment where the transceiver will be used falls within this range.
- Distance: The SFP-10G-SR= is designed for short-range transmissions of up to 300 meters, so if you need to transmit data over longer distances, you may need to consider a different transceiver.
- Power consumption: This transceiver has a low power consumption, which can help reduce energy costs in your data center.
General Information about this Cisco SFP-10G-SR=
- Manufacturer: Cisco
- Model Number or SKU# SFP-10G-SR=
- Product Type: SFP+ Transceiver
- Transceiver Type: SR
Technical Information of SFP Transceiver
- Application/Usage: Data Networking, Optical Network
- Ethernet Technology: 10 Gigabit Ethernet
- Interfaces/Ports Details: 1 x LC/PC Duplex 10GBase-SR Network
- Media Type Supported: Optical Fiber
- Fiber Optic Cable Standard: 62.5 µm, 50 µm
- Fiber Mode Supported: Multi-mode
- Network Technology: 10GBase-SR
- Form Factor: Hot-Swappable
- DDM: Yes
- Connector Type: Dual-LC
Network & Communication for 10GBPS Transceiver Module
- Cable Type: Ethernet 10GBase-SR
- Compliant Standards: IEEE 802.3ae
- Connectivity Technology: Wired
- Max Transfer Distance: 984 ft
- Optical Wave Length: 850 nm
Power Description of Multi-mode Transceiver
- Transmitter Type: VCSEL
- Receiver Type:: PIN
- Transceiver Power: -7.3~-1dBm
- Receiver Sensitivity: < -11.1dBm
- Receiver Overload: 0.5dBm
- Typical Power Consumption: ≤0.6W
- Max Operating Temperature: 158 degree Fahrenheit
- Min Operating Temperature; 32 degree Fahrenheit
Network Management & Protocol System
- IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI
- Networking Protocol: 10 Gigabit Ethernet
- Data Transfer Rate: 10GBPS
- Max Data Rate: 10.3125Gbps
Weight & Dimensions
- Height: 0.3 Inch
- Width: 0.5 Inch
- Depth: 2.2 Inch
- Cisco Nexus 5000 Series Switches
- Cisco Nexus 7000 Series Switches
- Knowledge of SFP-10G-SR Compatibility-
When you buy SFP-10G-SR transceivers for your switch, you are told to buy "brand" SFP-10G-SR from your network equipment manufacturer in order to keep your system running properly and safely. The "brand" SFP-10G-SR compatibility may never have any issues and the price is therefore very high, usually several hundred dollars. But since the transceivers are all manufactured based on MSA (Multi-source Agreement), which strictly define the operating characteristics of optical transceivers so that system vendors may implement ports in their devices that allow MSA compliant transceivers produced by name brand, as well a third party vendor, to function properly. Transceivers that manufactured by third party vendors, usually called compatible transceivers, such as compatible Cisco SFP-10G-SR transceivers. Usually, these compatible transceivers are tested on the corresponding switch before selling, therefore, the compatibility can also be ensured. Cisco SFP-10G-SR matrix can be found here.
About New Bulk Pack Products
Building a fiber-optic network calls for a lot of planning and consideration of many factors. Transceivers are part of the many devices used to build optical fiber systems. A transceiver serves the combined roles of a transmitter and a receiver in that it transmits and receives signals. They are most common in communication equipment such as cellular phones, cordless telephone sets, and radio. Small form factors are required as networks become dense and space is limited, which sees transceivers included in chipsets.
In local area networks (LAN), a transceiver is used to connect a computer to printers and other devices on the network. Usually, the transceiver is integrated into the Network Interface Card (NIC)
Typical Roles of a Transceiver
- Used to convert frequencies from IF to RF.
- Widespread use in wireless communication to transmit data – voice, data, and video.
- RF transceivers are used in communication devices to support radio and TV signal transmission, digital signals transmission, and satellite communication.
- Collision detection – detection of simultaneous signals on the network.
- Transceivers can be deployed to provide a jabber function to interrupt transmission of long data stream outputs.
Look no further for all types of transceivers including fiber optic transceivers, wireless transceivers, Ethernet transceivers, and RF transceivers. All these transceivers have different characteristics and support full-duplex communication, but the principle behind their work remains the same. Different types of transceivers will have varying numbers of ports used in transceiver networking connections.
RF Transceivers: these devices are used to transmit video or voice data over a wireless medium. Commonly used for satellite communication, radio transmission, and ITE/WiMax/WLAN networks. The radio transceiver works by silencing the receiver when it is transmitting. There is an electronic switch that facilitates the connection of both the receiver and transmitter on the same antenna. The switch protects the receiver from damage that may be caused by the transmitter output.
Fiber Optic Transceivers: Also referred to as optical modules or fiber optical transceivers. Used to transmit data in fiber optic technology. The network must also have electronic components to encode or decode data into light signals.
Ethernet Transceivers: Basically used to connect electronic devices in a network so that they are able to transmit and receive data. It is also referred to as a media access unit (MAU). The best application of these transceivers is in the specification of IEEE 802.3 and Ethernet. Ethernet transceivers will detect a collision, provide Ethernet interface processing, convert digital data, and provide access to the network.
Wireless Transceivers: Wireless transceivers are a fundamental component necessary for data delivery in wireless networks. These transceivers have two layers. The physical layer has a baseband processor and RF front end. The processor converts a bitstream to a collection symbol flow for data transmission. The second layer is a MAC layer for link traffic control in contacting wireless links, improving data throughput, and preventing collisions.
We guarantee our customers high quality and reliability for all our transceiver networking solutions, irrespective of the type and size of your network.
Here, you can check more available conditions of your desired product SFP-10G-SR= at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
Other Available Categories For - Networking - Transceiver
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.