Cisco SPA-1X10GE-L-V2= 1 Port Expansion Module 10 Gigabit Refurbished

In the realm of networking, Cisco has consistently been a pioneering force, introducing cutting-edge solutions to meet the ever-growing demands of modern connectivity. One such innovation is the Cisco SPA-1X10GE-L-V2= 1 Port 10 Gigabit Ethernet Expansion Module. This expansion module is designed to enhance network performance by providing a single port for 10 Gigabit Ethernet connectivity. In this comprehensive guide, we will delve into the various aspects of this module, exploring its features, benefits, installation process, and potential use cases.

The Cisco SPA-1X10GE-L-V2= is a high-performance expansion module engineered to augment network capabilities. Its primary function is to facilitate 10 Gigabit Ethernet connectivity, enabling faster data transfer and heightened network efficiency.

The defining feature of this module is its ability to support 10 Gigabit Ethernet, a significant advancement from traditional Ethernet speeds. This translates to a remarkable increase in data transfer rates, ideal for bandwidth-intensive applications.

With a single port dedicated to 10 Gigabit Ethernet, the module maintains simplicity while ensuring high-speed connectivity. This focused approach makes it an efficient solution for specific networking requirements.

The Cisco SPA-1X10GE-L-V2= is designed to seamlessly integrate with Cisco networking equipment, ensuring compatibility and smooth operation within Cisco environments. This interoperability simplifies the deployment process for existing Cisco users.

Businesses experiencing growth or anticipating increased network demands will appreciate the scalability offered by this module. It provides a flexible solution that can adapt to evolving networking needs.

By supporting 10 Gigabit Ethernet, the module significantly boosts network performance. This is particularly advantageous for enterprises dealing with large-scale data transfers, video streaming, or other bandwidth-intensive activities.

The single-port design streamlines network configurations, reducing complexity and potential points of failure. This simplicity not only enhances efficiency but also contributes to easier maintenance and troubleshooting.

In the rapidly evolving landscape of networking technologies, future-proofing is crucial. The Cisco SPA-1X10GE-L-V2= addresses this need by providing a forward-looking solution that supports high-speed data transfer, aligning with the trajectory of technological advancements.

Data Centers

In data center environments where rapid data transfer is imperative, the Cisco SPA-1X10GE-L-V2= shines. Its 10 Gigabit Ethernet capability is well-suited for connecting servers, storage arrays, and other high-performance equipment within the data center.

High-Volume Data Transfer

Applications that involve the transfer of large volumes of data, such as backups or multimedia content delivery, benefit from the module's high-speed connectivity. This ensures swift and efficient data transfers without bottlenecks.

Network Backbone

As a single-port 10 Gigabit Ethernet module, the Cisco SPA-1X10GE-L-V2= can serve as a reliable component of the network backbone. Its scalability allows it to adapt to increasing network traffic, making it a strategic choice for network expansion.

• Manufacturer: Cisco
• Part Number or SKU# SPA-1X10GE-L-V2=
• Product Type: Expansion Module

• Application/Usage: Data Networking
• Total Number of Ports: 1 Port Module

• Media Type Supported: Optical Fiber
• Fiber Mode Supported: Single-mode

• Full-duplex operation
• 802.1Q VLAN termination
• 802.1ad QinQ termination (stacked VLAN processing)
• Jumbo frames support (9188 bytes)
• Support for command-line interface (CLI)-controlled online insertion and removal (OIR)
• 802.3x flow control
• Bridge protocol data unit (BPDU), Cisco Discovery Protocol, and VLAN Trunking Protocol (VTP) filtering
• Layer 2 Protocol (BPDU, Cisco Discovery Protocol, and VTP) Tunneling
• Layer 2 access-list (MAC address-based filtering)
• Up to 8000 VLANs per SPA with a limit of 4000 VLANs per port for 802.1q
• Up to 5000 MAC accounting entries per SPA
• Up to 2000 MAC address entries for destination MAC address filtering per SPA, and up to 1000 MAC address filtering entries per port
• Per-port byte and packet counters for policy drops, oversubscription drops, CRC error drops, packet sizes, and unicast, multicast, and broadcast packets
• Per-VLAN byte and packet counters for policy drops, oversubscription drops, and unicast, multicast, and broadcast packets
• Per-port byte counters for good bytes and dropped bytes
• Other software features supported: Ethernet over Multiprotocol Label Switching (EoMPLS), QoS, Hot Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP)

• Storage temperature: -38 to 150°F (-40 to 70°C)
• Operating temperature, nominal: 32 to 104°F (0 to 40°C)
• Operating temperature, short term: 32 to 131°F (0 to 55°C)
• Storage relative humidity: 5 to 95% relative humidity
• Operating humidity, nominal: 5 to 85% relative humidity
• Operating humidity, short term: 5 to 90% relative humidity
• Operating altitude: -60 to 4000 meters

• Number of Total Expansion Slots: 1
• Expansion Slot Type: XFP

Management & Protocols

• Management:
• Host-system CLI
• Simple Network Management Protocol (SNMP)
• Inventory- and asset management-related MIBs
• Fault management MIBs
• Physical Interface Management MIBs
• Remote Monitoring (RMON)-MIB
• Cisco-class-based-QoS-MIB
• MPLS-related MIBs
• Ethernet MIB/RMON

Miscellaneous

• Compatibility: Cisco 7600 Series Router, Cisco 12000 Series Router, Cisco XR 12000 Series Router, Cisco CRS-1 Carrier Routing System

Compliance and Agency Approvals

• Safety
• UL 60950-1
• CSA C22 No. 60950-1
• EN 60950-1
• IEC 60950-1
• AS/NZS 60950
• EN 60825-1
• EN 60825-2
• 21 CRF 1040
• EMC
• CFR 47, FCC Part 15-Class A
• ICES 003-Class A
• CISPR 22 Class A
• EN 55022 Class A
• EN 300386 Class A
• AS/NZS Class A
• VCCI-Class B
• EN 50082-1
• EN 55024
• IEC/EN61000-4-2 Electrostatic Discharge Immunity (8-kV contact, 15-kV air)
• IEC/EN61000-4-3 Radiated Immunity (10 V/m)
• IEC/EN61000-4-4 Electrical Fast Transient Immunity (2-kV power, 1-kV signal)
• IEC/EN61000-4-5 Surge AC Port (4-kV CM, 2-kV DM)
• IEC/EN61000-4-5 Surge Signal Port (1-kV indoor, 2-kV outdoor)
• IEC/EN61000-4-5 Surge DC Port (1 kV)
• IEC/EN61000-4-6 Immunity to Conducted Disturbances (10 Vrms)
• IEC/EN61000-4-8 Power Frequency Magnetic Field Immunity (30 A/m)
• IEC/EN61000-4-11 Voltage Dips, Short Interruptions, and Voltage Variations
• Telecom
• IEEE 802.3ae (10 Gigabit Ethernet interface SPA)
• Industry Standards
• The Cisco 1-Port 10-GE SPA is designed to meet the following requirements (some qualifications are currently in progress):
• SR-3580-Network Equipment Building Standards (NEBS): Criteria levels (Level 3 compliant)
• GR-63-CORE-NEBS: Physical protection
• GR-1089-CORE-NEBS EMC and safety

In short, the Cisco SPA-1X10GE-L-V2= 1 Port 10 Gigabit Ethernet Expansion Module represents a significant leap forward in networking technology. Its ability to provide high-speed connectivity, coupled with its simplicity and compatibility with Cisco infrastructure, positions it as a valuable asset for businesses seeking to enhance their network performance. Whether deployed in data centers, for high-volume data transfer, or as part of the network backbone, this module proves its worth in diverse networking scenarios. As technology continues to advance, the Cisco SPA-1X10GE-L-V2= stands as a testament to Cisco's commitment to delivering innovative solutions that meet the evolving needs of the digital landscape.