X2-10GB-SR Cisco X2 10GBPS Transceiver Module Refurbished

Features and Benefits

The Cisco X2-10GB-SR transceiver module is a high-speed networking component that is designed for use with Cisco networking equipment. It is based on the X2 form factor and is designed for use with Cisco equipment that supports the X2 interface. Some of the key features and benefits of This model module include:

• High-speed connectivity: This module uses 10 Gigabit Ethernet technology to provide data transfer speeds of up to 10 Gbps over short distances of up to 300 meters. This makes it well-suited for use in applications where fast data transfer is required.
• Reliability: The module has been designed to meet stringent industry standards for performance and reliability, and has been tested extensively to ensure that it is capable of operating under a wide range of conditions. Additionally, the module has been designed with error-correction technology to help ensure that data is transmitted accurately and reliably.
• Compatibility: This Product module is compatible with a wide range of Cisco networking equipment, including switches, routers, and other networking devices. This makes it easy to integrate into existing networking infrastructure.
• Ease of use: The module is easy to install and use, with no special configuration required. It is plug-and-play, meaning that it can be quickly and easily installed into the appropriate port on a Cisco networking device.

Network Management and Security Features

The X2-10GB-SR Cisco X2 10GBPS Transceiver Module is a hardware component used for high-speed data transmission between network devices. Although it does not have any management or security features built-in, it is used in conjunction with other network components to provide network management and security.

Network Management Features:

• Simple Network Management Protocol (SNMP): SNMP is a network management protocol used to monitor and manage network devices such as routers, switches, and servers. It allows network administrators to gather information from network devices and configure them remotely.
• Cisco Discovery Protocol (CDP): CDP is a proprietary network management protocol used by Cisco devices to share information about connected network devices. It allows network administrators to discover and map network topology.
• Remote Monitoring (RMON): RMON is a network management protocol used to monitor network traffic and performance. It can be used to track network utilization, detect network problems, and monitor device performance.

Network Security Features:

• Access Control: Access control is used to restrict access to network resources. It can be implemented using various methods such as password protection, biometric authentication, and digital certificates.
• Virtual Private Network (VPN): VPNs use encryption to provide secure communication between remote users and the network. It can be used to encrypt data in transit and authenticate users before granting them access to the network.
• Firewall Protection: Firewalls are used to filter incoming and outgoing traffic based on predefined rules. They can be set up to block traffic based on specific criteria such as IP address, protocol type, and port number.
• Intrusion Detection and Prevention Systems (IDS/IPS): IDS/IPS systems monitor network traffic for suspicious activity and can take action to block or mitigate attacks. They can be set up to detect and prevent a wide range of attacks such as viruses, worms, and denial-of-service (DoS) attacks.
• Network Segmentation: Network segmentation is the practice of dividing a network into smaller, more manageable subnetworks. This can help to limit the impact of a security breach by containing it to a smaller portion of the network.

Fiber Optic Cable and Connector Types

The Cisco X2-10GB-SR transceiver module is a 10 Gigabit Ethernet hot-swappable input/output device that plugs into a switch's 10 Gigabit Ethernet slot. It uses a fiber optic cable to transmit data and has a maximum transmission distance of 300 meters.

The X2-10GB-SR transceiver module uses a type of fiber optic cable known as multimode fiber, which allows multiple modes or paths for the light to travel through the cable. This allows for higher bandwidth and faster data transmission speeds over shorter distances.

The connector type used by the X2-10GB-SR transceiver module is the LC connector, which is a small form factor connector that uses a push-pull mechanism for easy insertion and removal. LC connectors are widely used in fiber optic networks and are known for their reliability and high performance.

Main Specifications about this Cisco X2-10GB-SR

• Manufacturer: Cisco
• Model Number or SKU# X2-10GB-SR
• Product Line: System X
• Product Type: Transceiver Module

Technical Information of X2 Transceiver Module

• Application/Usage: Data Networking
• Data Transfer Rate:10 GBPS
• Form Factor Plug-in module
• Connectivity Technology Wired
• Cabling Type10GBase-SR
• Data Link Protocol10 GigE
• Optical Wave Length850 nm
• Max Transfer, Distance984 ft

Interfaces/Ports for Multi Mode Transceiver

• Interfaces/Ports: 1 x 10GBase-SR
• Interfaces/Ports Details: 1 x SC/PC Duplex 10GBase-SR
• Network Ports: SFP
• Number of Ports: 2
• Number of Modules: 1
• Connector: SC duplex

Performance of 10GBPS Transceiver

• Media Type Supported Optical Fiber
• Fiber Optic Cable Standard: 50 µm, 62.5 µm
• Fiber Mode Supported: Multi-mode
• Ethernet Technology: 10 Gigabit Ethernet
• Network Technology: 10GBase-SR

Power Description

• Transmit Power (dBm):
• Maximum: -1.0
• Minimum: -7.3
• Receive Power (dBm):
• Maximum: -1.0
• Minimum: -9.9
• Power Consumption: 4 Watt
• Power Supply :+3.3V, APS(+1.2V)

Dimensions & Weight

• Hot Swappable
• Width: 1.4 Inch
• Depth: 3.6 Inch
• Height: 0.5 Inch
• Weight (Approximately): 0.4 LBS

Environmental Parameters

• Min Operating Temperature: 32 °F
• Max Operating Temperature: 104 °F

Features

• Support of IEEE 802.3ae 10GBASE-SR at 10.3125Gbps
• Transmission Distance up to 300m (MMF)
• Vertical Cavity Surface Emitting Laser at 850nm
• Hot Pluggable 70-PIN Connector with XAUI Electrical Interface
• Management and control via MDIO 2-wire interface
• Diagnostic Optics Monitoring
• RoHS Compatible

Applications

• 10GE Ethernet switches and routers
• 10GE Core-routers
• 10GE Storage
• Other 10Gbps Ethernet Transmission System

Compatibility

Cisco switches that support 10 Gigabit Ethernet connectivity:

• Cisco 2360 Series – 2360-48TD-S
• Cisco 3100 Series WS–CBS3110X-S-I
• Cisco 3100 Series WS–CBS3120X-S
• Cisco 3100 Series WS–CBS3130X-S
• Cisco 4500 Series WS–X4013+10GE
• Cisco 4500 Series WS–X4516-10GE
• Cisco 4500 Series WS–X45-SUP6-E
• Cisco 4500 Series WS–X45-SUP6L-E
• Cisco 4500 Series WS–X4606-X2-E
• Cisco 4900 ME-4924-10GE
• Cisco 4900 Series WS–C4928-10GE
• Cisco 4900 Series WS–C4948-10GE
• Cisco 6500 Series VS–S720-10G-3C
• Cisco 6500 Series VS–S720-10G-3CXL
• Cisco 6500 Series WS–X6708-10G-3C
• Cisco 6500 Series WS–X6708-10G-3CXL
• Cisco 6500 Series WS–X6716-10G-3C
• Cisco 6500 Series WS–X6716-10G-3CXL
• Cisco 7600 RSP720-10GE
• Cisco Nexus 7000 N7K-M108X2-12L
• Cisco WS–C3560E-12D
• Cisco WS–C3560E-12SD
• Cisco WS–C3560E-24PD
• Cisco WS–C3560E-24TD
• Cisco WS–C3560E-48PD
• Cisco WS–C3560E-48PDF
• Cisco WS–C3560E-48TD
• Cisco WS–C3750E-24PD
• Cisco WS–C3750E-24TD
• Cisco WS–C3750E-48PD
• Cisco WS–C3750E-48PDF
• Cisco WS–C3750E-48TD
• Cisco WS–C4900M

Cisco line cards that support 10 Gigabit Ethernet connectivity:

• Cisco 4500 Series WS–X4013+10GE
• Cisco 4500 Series WS–X4516-10GE
• Cisco 4500 Series WS–X4606-X2-E
• Cisco 6500 Series VS–S720-10G-3C
• Cisco 6500 Series VS–S720-10G-3CXL
• Cisco 6500 Series WS–X6708-10G-3C
• Cisco 6500 Series WS–X6708-10G-3CXL
• Cisco 6500 Series WS–X6716-10G-3C
• Cisco 6500 Series WS–X6716-10G-3CXL
• Cisco 7600 RSP720-10GE
• Cisco Nexus 7000 N7K-M108X2-12L
• Cisco RFGW-X4516-10GE
• Cisco WS–X4904-10GE
• Cisco WS–X4908-10GE