Maintenance and Troubleshooting
The Dell 1NFN7 1.92TB TLC SAS-12GBPS Hot-Swap With Tray SSD is a solid-state drive (SSD) with a storage capacity of 1.92TB. It uses TLC (triple-level cell) NAND flash memory and has a SAS (Serial Attached SCSI) interface with a data transfer rate of 12 Gbps. It also has Hot-Swap capability, which allows you to replace the drive without shutting down the system, and it comes with a drive tray that is compatible with Dell PowerEdge servers.
Maintenance for the Dell 1NFN7 1.92TB TLC SAS-12GBPS Hot-Swap With Tray SSD is minimal. It does not require any scheduled maintenance such as defragmentation, and it has built-in wear-leveling algorithms that automatically distribute data evenly across the drive to extend its lifespan. However, it is recommended to monitor the drive's health status, temperature, and remaining lifespan using the vendor's management software.
In case of any issues, the first step in troubleshooting the Dell 1NFN7 1.92TB TLC SAS-12GBPS Hot-Swap With Tray SSD is to check the server's event logs and see if there are any error messages related to the drive. If the drive is not recognized by the system or is showing poor performance, it is recommended to check the SAS controller and its configuration, and to ensure that the latest firmware is installed. If the issue persists, it may be necessary to replace the drive.
Dell offers a 5-year limited warranty for this SSD drive, which covers all the hardware-related issues and defects. The customer support team can help troubleshoot and diagnose the problem, and if necessary, provide an RMA for a replacement drive.
It is also important to note that data backup is crucial when it comes to SSDs, as SSDs have a limited number of write cycles, so regular backups can help to ensure that your data is safe in case of any drive failure.
Types of Solid State Drives
The Dell 1NFN7 is a 1.92TB solid-state drive (SSD) that uses the SAS (Serial Attached SCSI) 12GB/s interface, TLC (Triple-Level Cell) flash technology, and comes with a tray. It is hot-swappable, which means it can be removed and replaced without shutting down the system.
There are several types of solid-state drives (SSDs) available, including:
- SLC (Single-Level Cell) SSDs: These SSDs use a single bit per cell, which makes them the fastest and most reliable type of SSD. They are typically used in high-performance applications such as servers and data centers.
- MLC (Multi-Level Cell) SSDs: These SSDs use two or more bits per cell, which makes them less expensive than SLC SSDs. They are typically used in consumer electronics and laptops.
- TLC (Triple-Level Cell) SSDs: These SSDs use three or more bits per cell, which makes them less expensive than SLC and MLC SSDs. They are typically used in consumer electronics and lower-end laptops.
This Dell drive uses TLC technology, which is a cost-effective solution. It is designed to be used in mix-use scenarios, where read and write operations are performed in a balanced way. Because of the TLC technology, the drive may not be as reliable as SLC and MLC drives, but it is still reliable enough for most use cases.
Connectivity and Compatibility
The Dell 1NFN7 1.92TB TLC SAS-12GBPS Hot-Swap With Tray SSD is a high-performance solid-state drive that is designed for easy connectivity and compatibility with a variety of systems.
One of the key features of the Dell 1NFN7 SSD is its use of the SAS (Serial Attached SCSI) interface, which is a high-speed data transfer interface that supports data transfer rates of up to 12 Gbps. SAS is compatible with a wide range of servers, storage arrays, and motherboards, making it easy to install and use the Dell 1NFN7 SSD.
Dell 1NFN7 SSD is designed for hot-swapping, which means that it can be easily removed and replaced without shutting down the system. This feature makes it easy to upgrade or replace the drive without interrupting ongoing operations.
Furthermore, the Dell 1NFN7 SSD is built with TLC (triple-level cell) flash memory technology which provides a balance of performance, endurance and cost-effectiveness for mixed-use workloads.
The Dell 1NFN7 1.92TB TLC SAS-12GBPS Hot-Swap With Tray SSD provides easy connectivity and compatibility with a wide range of systems, thanks to its use of high-speed SAS interface, hot-swap feature and TLC flash technology.
General Information
- Manufacturer : Dell
- Mfg Part Number : 1NFN7
- Type : Solid State Drive (SSD)
- Sub-Type : SAS-12GBPS
Technical Information
- Storage Capacity : 1.92 TB
- Form Factor : 2.5inch
- Interface Type : SAS 12GB/S
- Nand Flash Memory Type: TLC
Expansion & Connectivity
- Interfaces : 1 X SAS 12 GB/S
- Compatible Bays: 1 X Hot-Swap - 2.5
About Refurbished Products
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
