The CK614 Dell Controller is a management module designed to support the Dell PowerVault MD1000 SAS/SATA disk array. The technical specifications of the CK614 Dell Controller include:
- Compatibility: The CK614 Dell Controller is compatible with the Dell PowerVault MD1000 disk array.
- Interfaces: The controller supports SAS and SATA interfaces for connectivity to the disk array.
- Management: The CK614 Dell Controller provides enclosure management for the MD1000 disk array, including system monitoring, fault detection, and reporting.
- RAID support: The controller supports RAID levels 0, 1, 5, 6, 10, 50, and 60 for data redundancy and protection.
- Power supply: The controller requires a 12V DC input power supply.
- Environmental specifications: The CK614 Dell Controller is designed to operate in a temperature range of 5°C to 40°C and at a relative humidity range of 20% to 80% non-condensing.
- Dimensions: The controller has dimensions of 1.1 x 7.3 x 6.5 inches (2.79 x 18.54 x 16.51 cm).
- Weight: The controller weighs approximately 1 pound (0.45 kg).
- LED indicators: The CK614 Dell Controller includes LED indicators for system status, power, and fault detection.
- Firmware: The controller firmware can be upgraded through a web-based user interface or command line interface.
Here are the steps to install and configure the CK614 Dell Controller:
- Turn off the Dell PowerVault MD1000 disk array and unplug it from the power source.
- Remove the top cover of the MD1000 disk array by loosening the screws on the top panel.
- Locate the slot where the CK614 Dell Controller will be installed. It is usually located on the left-hand side of the disk array.
- Remove the filler panel from the slot by pulling the release lever and sliding it out.
- Carefully insert the CK614 Dell Controller into the slot and push it in until it clicks into place.
- Replace the top cover of the MD1000 disk array and secure it with the screws.
- Plug in the MD1000 disk array to the power source and turn it on.
- Wait for the MD1000 disk array to boot up and detect the CK614 Dell Controller.
- Access the CK614 Dell Controller management interface using a web browser or command line interface.
- Configure the controller settings according to your needs. This may include setting up RAID levels, configuring system monitoring, and setting up notifications for system alerts.
- Save the configuration settings and exit the management interface.
- Monitor the system and test the CK614 Dell Controller functionality to ensure that it is working properly.
By following these steps, you can successfully install and configure the CK614 Dell Controller for use with your Dell PowerVault MD1000 disk array.
Troubleshooting Common Issues with the CK614 Dell ControllerHere are some common issues you may encounter when using the CK614 Dell Controller with the MD1000 disk array, as well as some troubleshooting tips:
- Device not recognized: If the device is not recognized by your system, check that the CK614 controller is properly installed and connected to the MD1000 disk array.
- Poor performance: If you are experiencing poor performance, check that the CK614 controller is properly configured and that the drivers are up to date. You can also try optimizing the controller settings for your specific workload.
- Overheating: If the CK614 controller is overheating, ensure that the ventilation in the server room is adequate and that the air filters in the server are clean.
- Disk failures: If disks are failing or producing errors, check that the disks are properly installed and that they are supported by the CK614 controller.
- Incompatibility issues: If you are experiencing compatibility issues, ensure that the CK614 controller is compatible with the device or software you are trying to use.
- Firmware issues: If you are experiencing firmware issues, make sure that the firmware is up to date and that you are using the latest drivers and software.
If you continue to experience issues with the CK614 Dell Controller, consult the documentation provided by Dell or contact their customer support team for assistance. They can help you troubleshoot the issue and provide guidance on resolving any problems you may encounter.
General Information- Part No. # CK614
- Manufacturer : Dell
- Dell PowerEdge R200
- Dell PowerEdge R300
- Dell PowerEdge R410
- Dell PowerEdge R510
- Dell PowerEdge R610
- Dell PowerEdge R710
- Dell PowerEdge T310
- Dell PowerEdge T410
- Dell PowerEdge T610
- Dell PowerEdge T710
About Refurbished Products
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
