Benefits of Registered ECC Memory
Registered ECC (Error-Correcting Code) memory is a type of memory that offers several benefits over non-ECC memory. Here are some of the benefits of using Registered ECC memory:
- Improved reliability: Registered ECC memory is designed to detect and correct single-bit errors in real-time. This can help improve system stability and reduce the risk of data corruption or system crashes. This is especially important for systems that require high levels of reliability, such as servers, workstations, and data centers.
- Higher memory capacities: Registered ECC memory modules can support higher memory capacities than non-ECC memory modules. This is because the registered memory controller can support more memory modules without degrading performance. This is especially important for systems that require large amounts of memory, such as virtualization, video editing, and gaming.
- Lower power consumption: Registered ECC memory modules consume less power than non-ECC memory modules. This is because the registered memory controller consumes less power and generates less heat than the non-registered memory controller. This is especially important for mobile devices, where power consumption is a critical factor in battery life.
- Improved system performance: Although Registered ECC memory can slightly reduce the memory speed due to the additional overhead required for error correction, the performance impact is generally minimal. In some cases, the additional reliability provided by Registered ECC memory can actually improve system performance by reducing the number of system crashes and data errors that can degrade performance.
Upgrading Memory in Dell Systems
Upgrading memory in Dell systems can help improve system performance and allow for more efficient multitasking. Here are some steps to follow when upgrading memory in Dell systems:
- Determine the type of memory required: Before upgrading memory, it is important to determine the type of memory required for the system. This includes the memory type, speed, and capacity. Dell systems typically require DDR3 or DDR4 memory, with specific speed and capacity requirements depending on the system.
- Verify the maximum memory capacity: It is important to check the maximum memory capacity supported by the system before upgrading memory. This can be found in the system documentation or by checking the manufacturer's website.
- Determine the number of memory slots: Dell systems typically have multiple memory slots, which can be used to install additional memory modules. It is important to determine the number of memory slots available and whether any are currently occupied.
- Purchase compatible memory modules: Once the type and maximum capacity of memory are determined, it is important to purchase compatible memory modules. Dell recommends using memory modules purchased from Dell or a Dell-authorized reseller to ensure compatibility and reliability.
- Power off the system and remove the cover: Before installing the memory modules, it is important to power off the system and remove the cover. This will allow access to the memory slots.
- Install the memory modules: Insert the memory modules into the memory slots, following the manufacturer's instructions. Ensure that the modules are firmly seated in the slots and that any locking mechanisms are engaged.
- Power on the system and verify the memory: Once the memory modules are installed, power on the system and verify that the memory has been recognized. This can typically be done in the system BIOS or by checking the system properties in the operating system.
By following these steps, upgrading memory in Dell systems can be a relatively simple process. However, it is important to ensure that the memory is compatible with the system and that the installation is performed correctly to ensure optimal performance and reliability.
Performance Considerations
When upgrading memory in Dell systems, there are several performance considerations to keep in mind. Here are some of the key factors to consider:
- Memory speed: The speed of the memory modules can have a significant impact on system performance. In general, faster memory speeds can provide better performance, but the actual impact will depend on the specific system and applications being used. It is important to ensure that the new memory modules have a speed that is supported by the system.
- Memory capacity: Increasing the memory capacity can help improve system performance, especially when running memory-intensive applications or multitasking. However, there are diminishing returns in terms of performance gains beyond a certain point, as the system may not be able to effectively utilize the additional memory.
- Dual-channel memory: Many Dell systems support dual-channel memory, which can provide better performance by allowing for faster data transfer between the memory and the CPU. To take advantage of dual-channel memory, it is important to install memory modules in pairs, following the manufacturer's instructions.
- Mixing memory modules: When upgrading memory, it is important to ensure that all of the memory modules installed in the system are compatible and have the same specifications. Mixing memory modules with different speeds or capacities can result in performance issues and system instability.
- System bottlenecks: While upgrading memory can help improve performance, it is important to consider other potential system bottlenecks, such as the CPU, storage, and graphics card. Upgrading these components may be necessary to fully realize the performance benefits of additional memory.
General information:
- Manufacturer: Dell
- Manufacturer part number: CP5NF
- Type: Memory (RAM)
- Sub-Type: PC3-8500
- Product name: 16gb ddr3 sdram memory module
Technical Information:
- Storage capacity: 16gb
- Memory technology: ddr3 sdram
- Number of modules: 1 x 16gb
- Memory speed: 1066mhz ddr3-1066/pc3-8500
- Data integrity check: ecc
- Signal processing: registered
About New Bulk Pack Products
PC3-8500 memory
Are you looking for the higher bandwidth option in the SDRAM sequence? Look no further as the DDR3 (Double Data Rate 3) is one such device. A higher speed predecessor to DDR2, the DDR3 Dynamic Random Access Memory modules improved data transfer rates, better voltage handling, and signal integrity. Thus, if you're looking for an upgrade in your daily life PC or a business server room, these PC3-8500 DDR3 RAMs can be the ideal choice.
PC3 8500 RAM is far beyond the expectation due to faster data transfer rates and higher memory clock speeds. Thus, eliminating the bandwidth problems now, keep your hands on the PC3 RAMs.
PC3-8500 Reduces The Supply Voltage:
Are you looking for the PC3 8500 memory? There must be a solid reason behind the fact: improved virtualization, faster data transfer speeds, higher bandwidth peak rates, and lesser supply of voltage. Yes! The DDR3 memory module utilizes lesser voltage than its predecessors and is now regarded as the efficient RAM module to fit in the devices. The voltage is reduced to 1.5 volts as compared to 1.8V.
Pre-Fetch Buffering Increased the Operation Speed:
Overall, the PC3-8500 DDR3 has paved the way for faster operational speed by utilizing the prefetch option. The prefetch buffer is increased up to 8 bits with an 8n architecture to offer a winning combination in 4 clock cycles. Thus, no matter if you're choosing the 4GB, 8GB, 16GB, 32GB, 96GB, 128GB, or 256GB, DDR3 SDRAMs have much to offer for your servers.
PC3 8500 RAM utilizes Four Mode Registers:
Not only PC3 8500 but all the DDR3 SDRAMs now utilize the four-mode registers which were not possible in the previous generation DDR2. The CAS read and write latency support further boosts the performance for all four registers.
Apart from the mode registers, the DDR3 SDRAM includes the x4, x8, and x16 data output configurations, which were also a significant part of the previous generation. One major difference lies in the data banks, which are eight in number for the DDR3, ensuring that the business centers and central server rooms have better performance.
On-Die Termination Supported:
These PC3 8500 SDRAMs now support the On-die termination as well. This way, the PCB circuit layout will hold the correct termination and will not confine or limit the data transfer speeds.
Muli-Pin Configuration:
Most of the tech-savvies are not happy with the low-pin configuration in the DDR and DDR2. In comparison, that's not the case with these PC3 DDR3 RAMs, as it holds the 240+ pin configuration overall.
Why buy from ALLHDD?
ALLHDD never stops to impress the tech-savvies! The same goes here for these PC3-8500 RAM categories which are all filled with top-notch quality 1066 MHz DIMM memory modules to help you get a faster data transfer. Most of the products are under a 2.5% discount to help you get a better deal!
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
