HPE 627195-001 300GB 15K RPM HDD SAS 6GBPS SFF Enterprise New

The HPE 627195-001 is a 300GB Hard Drive with a spindle speed of 15,000 RPM and uses the SAS (Serial Attached SCSI) interface, with a data transfer rate of 6 Gbps. It is an enterprise-class hard drive which means it has been built and tested to handle heavy workloads and 24x7 operations. These drives are built with higher tolerances to heat, vibration, and noise as compared to consumer-grade hard drives. They also have a longer MTBF (Mean Time Between Failures) It is a small form factor (SFF) drive, typically 2.5 inches in size which is often used in servers and storage arrays. This drive is primarily designed for use in enterprise-class storage systems, servers, and workstations that require high performance and reliability. To use this drive, the system must have a SAS interface, which is typically found on high-end servers, workstations, and storage arrays. It's also important to check for compatibility with the system or device's firmware, as well as the available physical space and power supply before installing the drive.

The drive utilizes the Serial Attached SCSI (SAS) interface, offering a data transfer rate of 6 Gigabits Per Second (GBPS). SAS technology combines the benefits of SCSI and Serial ATA, providing a high-speed, reliable, and scalable connection. This ensures that the drive can keep up with the demanding data transfer needs of modern servers.

The Small Form Factor (SFF) design of this hard disk drive is a notable feature, allowing for efficient use of server space. Additionally, the Hot Swap capability ensures that the drive can be replaced or removed without shutting down the entire system. This feature contributes to increased server uptime and ease of maintenance.

The rotational speed of a hard disk drive is a crucial factor in determining its performance. The HPE 627195-001 operates at an impressive 15000 RPM (Revolutions Per Minute), signifying rapid data access and reduced latency. This high rotational speed makes it particularly suitable for applications that demand quick data retrieval.

Enterprise environments require storage solutions that can withstand heavy workloads and ensure data integrity. The HPE 627195-001 is built with enterprise-level reliability in mind, featuring robust components and advanced technologies that enhance data protection, error correction, and overall drive durability.

Given its high capacity, speed, and reliability, the HPE 627195-001 is an ideal choice for data center deployments. It can efficiently handle the vast amounts of data generated and processed in data centers, contributing to seamless operations and improved overall performance.

Enterprise applications, such as ERP (Enterprise Resource Planning) and CRM (Customer Relationship Management) systems, often require storage solutions that can handle simultaneous access from multiple users. The HPE 627195-001's enterprise-level reliability ensures that it can meet the demands of such applications without compromising performance.

The combination of a 15000 RPM rotational speed and a 6GBPS SAS interface results in enhanced performance. This makes the HPE 627195-001 suitable for tasks that demand rapid data access, ensuring that servers can handle intensive workloads efficiently.

For growing businesses and evolving server needs, scalability is a critical consideration. The HPE 627195-001 offers scalability through its high storage capacity and Hot Swap capability. This allows businesses to expand their storage infrastructure seamlessly as demand increases.

While enterprise-level performance often comes at a premium, the HPE 627195-001 strikes a balance by offering high performance without sacrificing cost-effectiveness. Businesses can benefit from advanced storage capabilities without breaking the budget.

The HPE 627195-001 is a 300GB enterprise-class hard drive with a spindle speed of 15,000 RPM and uses the SAS (Serial Attached SCSI) interface, with a data transfer rate of 6 Gbps. As a 15,000 RPM hard drive, it is expected to offer faster read and write performance than slower 7,200 RPM hard drives. The SAS interface offers faster data transfer rates and improved scalability compared to the older parallel SCSI. In terms of performance, the drive's data transfer rates would typically be around the maximum sustained data transfer rate of around 147MB/s, this number can vary depending on how the drive is being utilized, RAID configurations, and bottlenecks in other components of the system. Additionally, this is a mechanical Hard drive thus it may not have the same performance as a solid state drive. The drive's relatively high spindle speed and SAS interface make it well-suited for use in high-performance, mission-critical applications, where data transfer speed and reliability are critical. This drive is typically used in high-end servers, workstations, and storage arrays that require high performance and reliability.

The HPE 627195-001 is a 300GB enterprise-class hard drive with a SAS (Serial Attached SCSI) interface, which is a widely used interface in high-end servers and storage arrays. The drive is also a small form factor (SFF) with a size of 2.5 inches, which makes it compatible with most servers and storage systems that have a free SFF drive bay and SAS controller.

• Manufacturer: HPE
• Model Number or SKU# 627195-001
• Product Type: Hard Disk
• Interfaces Type: SAS 6GBPS 300GB-15K RPM

• HDD Capacity: 300 GB
• Form Factor: 2.5 Inch SFF
• Spindle Speed: 15000 RPM
• External Data Transfer Rate: 600 MBPS
• Bytes per Sector: 512E

• Seek Time: 2.9 MS (Average) / 5.3 MS (Max)
• Track-to-Track Seek Time: 0.4 MS

• Min Operating Temperature: 50 °F
• Max Operating Temperature: 95 °F

This HDD is compatible with various HPE ProLiant series, including:

• BL Series: BL20p (G4), BL45p (G2), BL460c (G6 G7), BL465c (G1 G5 G6 G7), BL480c (BL620c G7), BL680c (G5 G6 G7), BL685c (G6 G7), WS460c (G6 G7)
• DL Series: DL1000, DL120 (G6 G7), DL160 (G6 G7), DL160se (G6 G7), DL165 (G6 G7), DL170e (G6 G7), DL170h (G6 G7), DL180 (G6 G7), DL320 (G6 G7), DL360 (G4p G5 G6 G7), DL365 (G1 G5 G6 G7), DL370 (G6 G7), DL380 (G4 G5 G6 G7), DL385 (G1 G2 G3 G4 G5/G5p G6 G7), DL580 (G3 G4 G5 G6 G7), DL585 (G2 G3 G4 G6 G7), DL785 (G6)
• ML Series: ML 110 (G7), ML350 (G5 G6 G7), ML370 (G5 G6 G7), ML570 (G3 G4 G5)
• SL Series: SL390s (G6 G7)
• Storage Systems: D2700, MSA 1040, MSA70, P2000 (G3), X1500 (G2), X16000 (G2), X1800 (G2), X3400 (G2)
• StoragEasy: X3800 (G2), 2000i (G2), 2000sa (G2)

Finally, The HPE 627195-001 300GB 15000 RPM SAS Enterprise Hard Disk Drive emerges as a robust and efficient solution for server storage needs. Its blend of high capacity, rapid data access, and enterprise-level reliability makes it a versatile choice for a variety of applications. Whether deployed in data centers, used for database management, virtualization environments, or enterprise-level applications, this hard disk drive proves to be a valuable asset. As technology continues to advance, having storage solutions that can keep pace with the evolving demands of servers is essential, and the HPE 627195-001 stands as a testament to meeting these demands effectively.