The 404670-003 HP 72.8GB 10K RPM Ultra-320 SCSI 80-pin LVD Hot Swap Internal Hard Drive features an Ultra320 SCSI interface that supports a data transfer rate of up to 320MB/s and uses an 80-pin LVD (Low Voltage Differential) connector.
SCSI (Small Computer System Interface) is a high-performance, parallel interface designed for use in enterprise and data center environments. It allows for faster data transfer rates and increased scalability compared to older parallel interfaces such as IDE. The Ultra320 SCSI standard is an improved version of SCSI that supports faster data transfer rates and improved cable lengths.
The drive is designed to connect to a SCSI host controller, which then connects to the host system. The host controller provides the necessary logic and control to communicate with the drive and enables the host system to access the data stored on the drive. The 80-pin LVD connector is used to connect the drive to the host controller and provides power and data transfer between the drive and the host controller.
This interface and connector are suitable for use in high-performance and demanding enterprise environments, where fast data transfer rates and high scalability are critical.
High-speed data transfer
The 404670-003 HP 72.8GB 10K RPM Ultra-320 SCSI 80-pin LVD Hot Swap Internal Hard Drive is designed to provide high performance in enterprise and data center environments. It has a rotation speed of 10,000 RPM, which allows for faster data access and transfer speeds, making it ideal for applications that require quick access to large amounts of data.
Additionally, it features an Ultra320 SCSI interface that supports a data transfer rate of up to 320MB/s, which is faster than the older SCSI standards and allows for a faster data transfer rate between the drive and the host system. The drive also has a large buffer size of 8MB, which serves as a temporary storage area that helps to improve the drive's performance by allowing the drive to quickly access frequently used data.
The drive also includes advanced error correction and data protection features such as RAFF technology, advanced power management, and vibration protection, which improve overall drive reliability.
The 404670-003 HP 72.8GB 10K RPM Ultra-320 SCSI 80-pin LVD Hot Swap Internal Hard Drive is compatible with a wide range of servers and storage systems that support Ultra320 SCSI interface and 80-pin LVD connectors. This drive is compatible with HP ProLiant servers, HP StorageWorks arrays, and other non-HP servers and storage systems that support Ultra320 SCSI interface and 80-pin LVD connectors.
It's important to check the compatibility of this drive with your specific server or storage system model before purchasing, as not all systems may support this drive's interface or may have different form factor. It's also recommended to check for any firmware updates that may be required for the drive to work properly with your system.
It's also important to check the compatibility of the drive's Ultra320 SCSI interface version with the host controller, as well as the drive's firmware version with the host system's firmware. This can help to ensure the best performance and compatibility.
It's also recommended to check the drive's power and cooling requirements to ensure that your system can provide the necessary power and cooling for the drive to function properly. Additionally, it's important to check the cable length and connection of the drive to ensure compatibility with your system, since the drive requires a specific cable length and connection to function properly.
Type: Hard Drive
Sub-Type: Ultra 320 SCSI
Product Type: Internal Hard Drive
Form Factor: 3.5-inch
Capacity: 72.8 GB
Spindle Speed: 10K RPM
Drive Interface Type: Ultra-320 SCSI
Connector Type: 80-Pin
Dimension and Weight
Width: 4 Inch
Depth: 5.8 Inch
Height: 1 Inch
Weight: 1.52 Lbs
About Refurbished Products
The ultra320 SCSI hard drive generation is the immediate upgrade of its predecessor, the ultra160 SCSI. The newer generation ultra320 SCSI HDD comes about as an implementation of the SCSI-3 Parallel Interface-4 (SPI-4) standards.
Over its lifetime, the SCSI standard is widely used in servers and high-end workstations. It is possible to install SCSI HDDs in a desktop PC that has one or more IDE disk drives. The IDE drive acts as the boot drive, while the SCSI hard drive provides additional storage capacity. SCSI is not commonly used in desktop PCs, although it allows the addition of a scanner and several other drives such as DVD-RAM, CD-Rs, and Zip drives to a single SCSI cable chain. USB and FireWire have gradually replaced the SCSI as alternate interfaces in the latest desktop PCs.
In-network servers, SCSI allows for the setting up of several hard drives in the RAID configuration to reduce the risk of loss of data. The configuration supports hot-swapping - the changing of hard drives while the system is still operating.
Ultra320 SCSI HDD just as the name suggests delivers 320 Mbps top speed and provides a faster bus at 80 MHz and a wider data path at 16 bit. Connections with the Ultra320 SCSI HDDs just like with SCSI devices can be daisy-chained since they have two ports - the incoming and the outgoing cables. Besides, SCSI has a strong commitment to backward compatibility to previous generations, which explains its widespread use as an I/O interface and elimination of the need for substantial investments in equipment and infrastructure. Migration to the ultra320 SCSI HDD is smooth whether it is from the Ultra160 SCSI or other generations of the SCSI standard because of backward compatibility.
The ultra320 SCSI hard drive takes on technologies such as domain validation, cyclic redundancy check, and dual-edge clocking first introduced by ultra160 SCSI. Additionally, the ultra320 SCSI hard drive introduces protocol changes and other technologies that enhance performance and support reliable data transfer speeds at 320 Mbps. We have the following ultra320 SCSI HDD options: 146GB-10K RPM, 146GB-15K RPM, 300GB-10K RPM, 300GB-15K RPM, 36GB-10K RPM, 36GB-15K RPM, 73GB-10K RPM, 73GB-15K RPM, and 18GB-15K RPM to meet your performance and storage requirements.
The standard features of the ultra320 SCSI hard drive include:
- Two-fold increase in transfer speed: The ultra320 SCSI hard drive increases the transfer rate by 100% from the previous generation at the rate of 320 Mbps. The technology allows greater transfer rates, effectively leading to greater performance in environments of extended data transfer and support for many devices on a single bus.
- Support for SCSI packet protocol: By enabling packet protocols, the ultra320 SCSI HDD helps to reduce command overhead by using dual transition (DT) data phases to transfer data, commands, and statuses rather than asynchronous phases that are generally slow. Packet protocol allows for the transfer of multiple commands in one connection as well as increased performance through minimal command overhead and maximum bus utilization.
- Quick Arbitration and Selection (QAS): the technology helps reduce control release overhead between devices at the SCSI bus. QAS is all about reducing command overhead and maximizing utilization of the bus.
- Read/Write Data Streaming facilitates the reduction of overhead associated with data transfer through the sending of a LUN Q-TAG (LQ) data stream packet, which is subsequently followed by multiple data packets. Greater write data streaming is achieved since the bus turnaround delay is eliminated between LQ and data packets.
- The flow control feature facilitates the initiator to enhance the pre-fetching of data for writes and enhance the flushing of FIFOs for reads.
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.