The HP 500206-071 is a server memory module manufactured by HP. It has a capacity of 8GB and runs at a speed of 1066 MHz using PC3-8500 memory specification and CL7 latency. It is a ECC (Error Correction Code) Registered DDR3 SDRAM memory module, and uses 240-pin DIMM form factor.
ECC memory includes extra memory bits that are used to detect and correct errors that occur in the memory, which can help to improve the reliability and stability of the system. ECC memory is typically more expensive than non-ECC memory and also takes up more memory capacity.
Registered memory, also called buffered memory, includes a buffer chip that is used to improve the reliability of the memory module, this can help in systems with many DIMMs or with high memory population. This can help to prevent data corruption and also can help to improve the system stability.
This memory module is suitable for servers and other high-end computers that require ECC memory, it's important to check the specific compatibility with the server or system that you plan to use this memory module with. The memory architecture of the server, the number of memory slots available, the maximum capacity and the clock speed of the memory should be considered.
It's also important to check the server documentation or specifications to ensure the compatibility and the installation instructions. it's worth noting that this memory module is using a older technology and specification compare to the current available memory, this can affect the performance and could be limited to the server capabilities
In summary, the HP 500206-071 memory module is designed for servers and offers a reliable solution for servers that require ECC memory with a capacity of 8GB and runs at a decent speed of 1066 MHz, however it's important to ensure the compatibility before purchasing and consider the age of the technology and how this will affect the overall performance and limitation of your server.
The HP 500206-071 memory module is designed for servers and can improve the performance of the server in certain ways.
With a capacity of 8GB, it allows the server to handle larger amounts of data, which can help to improve the performance of the system by allowing it to run multiple applications at the same time without running out of memory. Additionally, the memory's speed of 1066 MHz can improve the overall system responsiveness and performance.
This memory module is ECC (Error Correction Code) Registered DDR3 SDRAM, which includes extra memory bits that are used to detect and correct errors that occur in the memory, also include a buffer chip that is used to improve the reliability of the memory module. This can improve the overall data integrity, preventing data corruption and system stability issues.
However, it's worth noting that the speed of 1066MHz is relatively slower compared to the current available memory on the market, this might impact the overall performance, especially in server that require high-speed memory and large data handling, this will be limited by the memory speed.
It's important to note that the performance of this memory module will vary depending on the specific use case and the overall system configuration. It's highly recommended to consult the vendor's documentation or specifications to ensure the compatibility, the installation instructions, and how this module will perform in your specific scenario, also check the overall system configuration and workloads, to ensure that the memory is able to meet the requirements.
In summary, the HP 500206-071 memory module is designed for servers and offers a reliable solution for servers that require ECC memory with a capacity of 8GB, however the speed of 1066 MHz might affect the overall performance, especially in systems that require high-speed memory and large data handling.
When assessing the credibility of a product, it's important to consider the reputation of the manufacturer, the product's specifications and features, and the customer reviews and ratings of the product.
In the case of the HP 500206-071 memory module, HP is a well-established and reputable manufacturer of computer hardware, including memory modules for servers. The product's specifications, such as its ECC and Registered memory features, its 8GB capacity, and its 1066 MHz speed, are consistent with the standards for server memory.
It's important to note that the product's credibility will also depend on the specific use case and the overall system configuration. While the ECC feature and registered memory can help in preventing data corruption and improve data integrity, the lower speed of 1066MHz is relatively slower compared to the current available memory on the market, this might impact the overall performance and can be limiting to certain systems.
It's highly recommended to consult the vendor's documentation or specifications to ensure the compatibility, the installation instructions, and how this module will perform in your specific scenario, also check the overall system configuration and workloads, to ensure that the memory is able to meet the requirements.
In summary, the HP 500206-071 memory module has good credibility as it comes from a well-established and reputable manufacturer and has features and specifications that are consistent with industry standards for server memory. However, the lower speed of 1066MHz can affect the overall performance and it's important to ensure the compatibility before purchasing, also consider the age of the technology and how this will affect the overall performance and limitation of your server.
General InformationBrand Name: HP
Type: Memory (RAM)
RAM Type: PC3-8500
Product Name: 8GB DDR3 SDRAM Memory Module
Technical InformationStorage Capacity: 8GB
Memory Technology: DDR3 SDRAM
Number Of Modules: 1 X 8GB
Bus Speed: 1066mhz DDR3-1066/PC3-8500
Signal Processing: Registered
Platform Support: Proliant Server
Form Factor: 240-Pin Dimm
Physical CharacteristicsDimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
Weight: 0.45 Kg (1 Lb)
CompatibilityProprietary HP Proliant Server - Dl160 G6
Proprietary HP Proliant Server - Dl180 G6
Proprietary HP Proliant Server - Dl360 G6
Proprietary HP Proliant Server - Dl370 G6
Proprietary HP Proliant Server - Dl380 G6
Proprietary HP Proliant Server - Ml150 G6
Proprietary HP Proliant Server - Ml350 G6
Proprietary HP Proliant Server - Ml370 G6
Proprietary HP Proliant Server - Bl460c G6
Proprietary HP Proliant Server - Bl490c G6
About New Bulk Pack Products
Are you looking for the higher bandwidth option in the SDRAM sequence? Look no further as the DDR3 (Double Data Rate 3) is one such device. A higher speed predecessor to DDR2, the DDR3 Dynamic Random Access Memory modules improved data transfer rates, better voltage handling, and signal integrity. Thus, if you're looking for an upgrade in your daily life PC or a business server room, these PC3-8500 DDR3 RAMs can be the ideal choice.
PC3 8500 RAM is far beyond the expectation due to faster data transfer rates and higher memory clock speeds. Thus, eliminating the bandwidth problems now, keep your hands on the PC3 RAMs.
PC3-8500 Reduces The Supply Voltage:
Are you looking for the PC3 8500 memory? There must be a solid reason behind the fact: improved virtualization, faster data transfer speeds, higher bandwidth peak rates, and lesser supply of voltage. Yes! The DDR3 memory module utilizes lesser voltage than its predecessors and is now regarded as the efficient RAM module to fit in the devices. The voltage is reduced to 1.5 volts as compared to 1.8V.
Pre-Fetch Buffering Increased the Operation Speed:
Overall, the PC3-8500 DDR3 has paved the way for faster operational speed by utilizing the prefetch option. The prefetch buffer is increased up to 8 bits with an 8n architecture to offer a winning combination in 4 clock cycles. Thus, no matter if you're choosing the 4GB, 8GB, 16GB, 32GB, 96GB, 128GB, or 256GB, DDR3 SDRAMs have much to offer for your servers.
PC3 8500 RAM utilizes Four Mode Registers:
Not only PC3 8500 but all the DDR3 SDRAMs now utilize the four-mode registers which were not possible in the previous generation DDR2. The CAS read and write latency support further boosts the performance for all four registers.
Apart from the mode registers, the DDR3 SDRAM includes the x4, x8, and x16 data output configurations, which were also a significant part of the previous generation. One major difference lies in the data banks, which are eight in number for the DDR3, ensuring that the business centers and central server rooms have better performance.
On-Die Termination Supported:
These PC3 8500 SDRAMs now support the On-die termination as well. This way, the PCB circuit layout will hold the correct termination and will not confine or limit the data transfer speeds.
Most of the tech-savvies are not happy with the low-pin configuration in the DDR and DDR2. In comparison, that's not the case with these PC3 DDR3 RAMs, as it holds the 240+ pin configuration overall.
Why buy from ALLHDD?
ALLHDD never stops to impress the tech-savvies! The same goes here for these PC3-8500 RAM categories which are all filled with top-notch quality 1066 MHz DIMM memory modules to help you get a faster data transfer. Most of the products are under a 2.5% discount to help you get a better deal!
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.