The HP 500662-S21 is an 8GB DDR3 SDRAM memory module. It is designed to operate at a speed of 1333 MHz and has a data transfer rate of 10600 megabytes per second. The memory module is 240-pin, which means it is intended for use in a DDR3-compatible motherboard that has 240-pin DIMM sockets.
The module is ECC (Error Correcting Code) memory, which means it can detect and correct errors that may occur during data transfer. This can help prevent system crashes and data corruption, and is often used in server and enterprise environments.
It is also registered memory, also known as buffered memory, which means that it includes a register chip on the module itself that controls the flow of data to and from the module, helping to improve the performance and stability of the memory.
The module is rated at CL9, which means it has 9 cycles for the latency timing. Lower numbers for the CAS latency (CL) indicate better performance.
This HP 500662-S21 memory module is intended for use in HP ProLiant servers, so it is recommended to check with HP documentation or website to confirm the compatibility with your specific server model. The module is server-grade memory, and it is intended to use in servers or workstation computer.
The HP 500662-S21 memory module is designed to improve the performance of a server or workstation computer. It has 8GB of DDR3 SDRAM memory, which is capable of transferring data at a speed of 1333MHz and a data transfer rate of 10600MB/s. This can help to increase the overall speed and responsiveness of the system, especially if the system is currently running low on memory.
The ECC (Error Correcting Code) feature can also improve performance by detecting and correcting errors that may occur during data transfer, which can help prevent system crashes and data corruption. This can help to keep the system running smoothly, especially in environments where uptime and data integrity are critical.
The module is also registered memory, which can also improve the performance by controlling the flow of data to and from the module and thus helps to improve the stability of the memory.
The module has a CAS Latency of 9, it means that it has 9 cycles for the latency timing. Lower numbers for the CAS latency (CL) indicate better performance.
It's important to note that the performance improvement can vary depending on the usage and the current system's resources. It is recommended to monitor system performance before and after the upgrade to get an accurate idea of the improvement.
As mentioned before, it is important to make sure that the server or workstation is compatible with this memory module and support ECC and registered memory before upgrading. This memory module is specifically designed and tested for use in HP servers and workstations, so it is recommended for use in those types of machines.
The HP 500662-S21 is a memory module that is specifically designed for use in HP servers and workstations. In order to ensure compatibility, you should check the documentation for the server or workstation to confirm that it supports DDR3 memory and that it is compatible with the module's specifications, including its speed, data transfer rate, and memory capacity.
It is also important to ensure that the server or workstation motherboard supports ECC (Error Correcting Code) and registered memory, as the HP 500662-S21 is both ECC and registered memory.
It's best practice to refer to HP's website for the specific memory compatibility for the model of server or workstation you're working on. Some HP servers and workstations may have different requirements for memory compatibility and may not be compatible with all types of memory.
You can also use the HP's memory configuration tool to help you select the correct memory for your specific HP server or workstation. The tool can help you to check which memory is recommended and compatible with your specific HP server or workstation model.
It's important to keep in mind that the HP 500662-S21 memory module is intended for use in servers and workstations, and may not be compatible with standard consumer-grade desktop computers.
General InformationBrand Name: HP
Type: Memory (RAM)
RAM Type: PC3-10600
Product Name: 8GB DDR3 SDRAM Memory Module
Technical InformationStorage Capacity: 8GB
Memory Technology: DDR3 SDRAM
Chips Organization: X4
Number Of Modules: 1 X 8GB
Bus Speed: 1333mhz DDR3-1333/PC3-10600
Data Integrity Check: Ecc
Signal Processing: Registered
Ram Features: Dual Rank
Cas Latency Timings: Cl9
Upgrade Type: System Specific
Platform Support: Proliant Server
Form Factor: 240-Pin Dimm
Physical CharacteristicsDimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
Weight: 0.45 Kg (1 Lb)
Compatibility:Bladesystem Proliant Server Blades
Proprietary HP Proliant Server - Bl280c G6
Proprietary HP Proliant Server - Bl460c G6
Proprietary HP Proliant Server - Bl490c G6
Proprietary HP Proliant Server - Bl2x220c G6
Proprietary HP Proliant Server - Bl465c G7
Proprietary HP Proliant Server - Bl685c G7
Proprietary HP Proliant Server - Bl460c G7
HP Proliant Dl Servers SeriesProprietary HP Proliant Server - Dl160 G6
Proprietary HP Proliant Server - Dl180 G6
Proprietary HP Proliant Server - Dl360 G6
Proprietary HP Proliant Server - Dl370 G6
Proprietary HP Proliant Server - Dl380 G6
Proprietary HP Proliant Server - Dl1000 / Dl170h G6
Proprietary HP Proliant Server - Dl160se G6
Proprietary HP Proliant Server - Dl360 G7
Proprietary HP Proliant Server - Dl165 G7
Proprietary HP Proliant Server - Dl385 G7
Proprietary HP Proliant Server - Dl580 G7
Proprietary HP Proliant Server - Dl585 G7
Proprietary HP Proliant Server - Dl980 G7
HP Proliant Ml Servers Series:Proprietary HP Proliant Server - Ml150 G6
Proprietary HP Proliant Server - Ml350 G6
Proprietary HP Proliant Server - Ml370 G6
HP Proliant Sl Servers Series:Proprietary HP Proliant Server - Sl160z G6
Proprietary HP Proliant Server - Sl170z G6
Proprietary HP Proliant Server - Sl2x170z G6
Proprietary HP Proliant Server - Sl165z G7
HP Storageworks:Proprietary HP Storageworks - X1400 G2 Nas
Proprietary HP Storageworks - X1500 G2 Nas
Proprietary HP Storageworks - X1600 G2 Nas
Proprietary HP Storageworks - X1800 G2 Nas
About New Bulk Pack Products
PC3 10600 Memory
Many organizations, server rooms, and data centers are getting bigger. With their servers ballooning up with the chunks of more information, the accuracy and integrity of data and its transfer are more concerned. Especially during the storage and transfer, data needs to be protected from being corrupted. That's where the promising RAM (memory modules) technologies need to take over and keep the data closer to the processors.
ALLHDD is here at service!
Choosing the right DIMM Memory Modules which can upsurge the PC's performance by promising integrity and faster data transfer rates is the need of the hour. But things might not be easier as it looks! Investing in the PC3 10600 RAM is as important as buying the latest-generation processor coupled with a superior GPU. All in all, no matter if you're a tech-savvy or a layman looking forward to improved, crash-free, and worry fewer data transfers, the ALLHDD has got you covered with the full range of PC3-10600 memory here to help you get the right deal without wasting much time.
Set the Stage for Safe, Secure, and Faster Data Transfer
Organizations are piling up the mountains of data where the chances of data corruption and loss outlive. Also, the computational performance is increasing at a faster and unmatchable pace requiring you to uplift your data access technologies. Imagine pairing up a massively high-performing Processor with the low DDR3 SDRAM memory module; things will be forced into a dip, and finally, the task grind to halt.
That's where the large capacity SRAM and DRAM jump into the business! Equipped with the larger and copious PC3-10600 DDR3 (192GB, 512GB, or maybe up to 1TB); things might not always get in favor of the data server rooms or business data centers, as this is a power-consuming method but will save you from a lot of hassle in handling the sheer volume of data. All in all, we've got you covered with a range of PC3 10600 RAM, including 1333MHz PC3 10600 and pc3-10600 cl9 at your service.
Error-Correcting Code (ECC) RAM Eliminates Single Bit Errors
Every high-tech desktop or PC is loaded with DDR3 or DDR4 RAM, and that's the most typical part! The difference lies in the safety check and preventing data loss - one of the major concerns for the tech-savvies in business centers or server rooms. ECC RAMs are meant to identify any potential risk by introducing the complex algorithm via a Parity Check method. Parity Check will look for the alterations or mutations in the bytes pattern. If the error occurred already, ECC RAM would restore the original form of data- uncorrupted and corrected!
Why Buy From Us?You might find plenty of platforms selling the hot-swap RAMs, but trusting one will be the most challenging part! We, at ALLHDD, ensure you of the utmost quality in PC3-10600 memory modules to help you extract the maximum efficiency and performance out of your bare metal servers. We have multiple variants in PC3-10600 ECC certified RAMs; choose as per your need.
Here, you can check more available conditions of your desired product 500662-S21 at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.