Power Efficiency and Energy Savings
The HPE 400GB SATA 3GBPS MLC 2.5 Inch SFF SC Enterprise SSD (part number 636458-003) is designed for high performance and reliability in enterprise environments. It is built with multi-level cell (MLC) flash memory, which provides high storage capacity and good performance at a lower cost than single-level cell (SLC) flash memory.
As far as power efficiency and energy savings, the specific power consumption specifications for the 636458-003 are not publicly available. However, SSDs generally consume less power than traditional hard disk drives (HDDs) because they have no moving parts. This makes them more energy efficient and can result in lower power bills for the user. Additionally, the 2.5-inch form factor of the 636458-003 is more power efficient than larger 3.5-inch HDDs, as they have a smaller form factor and require less power to operate.
In general, enterprises can expect to see some energy savings and improved power efficiency with the use of the 636458-003 HPE 400GB SATA 3GBPS MLC 2.5 Inch SFF SC Enterprise SSD.
Deployment and Upgrade Process
The deployment and upgrade process of the HPE 636458-003 400GB SATA 3GBPS MLC 2.5 Inch SFF SC Enterprise SSD can vary depending on the specific use case and system configuration, but in general, the following steps can be taken:
Preparation:
- Ensure that the system meets the minimum requirements for installing the SSD, such as compatibility with SATA 3GBPS and 2.5-inch form factor.
- Backup any important data on the current system before proceeding with the upgrade.
- Obtain the necessary tools and equipment, such as an anti-static wrist strap, screwdrivers, and caddy/bracket for installing the SSD into the system.
Physical Installation:
- Power off the system and disconnect any cables.
- Open the system to access the internal components.
- Remove the current storage device from the system, following the manufacturer's instructions.
- Insert the HPE 636458-003 SSD into the caddy/bracket, if necessary.
- Install the SSD into the system, securing it with screws or other mounting hardware as required.
- Close the system and connect any cables.
Initialization and Configuration:
- Power on the system and enter the BIOS or UEFI setup utility.
- Configure the SATA mode to AHCI, if necessary.
- Initialize the SSD by creating a partition and formatting it, using the built-in disk management tools in the operating system.
- Install the operating system on the SSD, if necessary.
- Install any necessary drivers and software.
Verification:
- Boot into the operating system and verify that the SSD is recognized and functioning properly.
- Check the storage capacity and performance of the SSD, using tools such as benchmarking software or the operating system's performance monitoring tools.
- Test the SSD with a variety of applications to ensure it meets the desired performance and reliability requirements.
Storage Tiering and Caching
Storage tiering and caching are two key technologies that can be used to improve the performance and efficiency of storage systems.
Storage tiering involves separating data into different categories based on their access patterns, usage patterns, and performance requirements. Data that requires high performance and frequent access is placed on high-performance storage tiers, while data that requires less performance and infrequent access is placed on lower-performance storage tiers. This way, the system can optimize performance and reduce costs by using the appropriate storage for each category of data.
Caching is a technique for temporarily storing data in high-speed memory, such as RAM or flash, in order to improve the performance of data retrieval operations. Caching can be used in a variety of ways to improve the performance of storage systems, such as by storing frequently accessed data in cache to reduce the number of disk I/O operations, or by storing the contents of disk blocks that are being frequently read in cache to reduce disk latency.
The HPE 636458-003 400GB SATA 3GBPS MLC 2.5 Inch SFF SC Enterprise SSD can be used as a high-performance storage tier in a storage tiering configuration, or as a cache layer in a caching configuration. The specific implementation and configuration will depend on the requirements of the system, including the types and amounts of data being stored, the performance and capacity needs of the system, and the available hardware and software components.
Product Details
- Manufacturer: Hewlett Packard Enterprise (HPE)
- MPN: 636458-003
- Type: Hot Swap Solid State Drive
- Option Part Number: 653126-B21
- Spare Part Number: 653970-001
- Model Number: MO0400EBTJV
Technical Information
- Capacity: 400 GB
- Interface Type: SATA 3GBPS
- Form Factor: 2.5 inch LFF
- Workload Type: Enterprise Mainstream
- Plug Type: Hot Plug
- Carrier Type: Smart Carrier
- Flash Type: MLC
- Bundled With: HPE Smart Carrier
Product Dimensions & Weight
- Height: 0.63 inch
- Width: 3.10 inch
- Depth: 5.45 inch
- Weight: 1.50 lbs
Compatibility Information
- HPE ProLiant BL Series: ProLiant BL420c (Gen8 Gen9) BL460c (Gen8 Gen9) BL465c (Gen8 Gen9)
- HPE ProLiant DL Series: DL20 (Gen9) DL60 (Gen9) DL80 (Gen9) DL120 (Gen8 Gen9) DL160 (Gen8 Gen9) DL180 (Gen8 Gen9) DL320e (Gen8 Gen9) DL360e (Gen8 Gen9) DL360p (Gen8 Gen9) DL380e (Gen8 Gen9) DL380p (Gen8 Gen9) DL388 (Gen9)
- HPE ProLiant ML Series: ML110 (Gen8 Gen9) ;ML150 (Gen8 Gen9) ML310e (Gen8 Gen9) ML350 (Gen8 Gen9) ML350e (Gen8 Gen9)
- HPE ProLiant SL Series: SL200t (Gen8 Gen9) SL230s (Gen8 Gen9) SL250s (Gen8 Gen9) SL2500 SL4550 (Gen8 Gen9) SL4545 (Gen8 Gen9) SL454x
About Refurbished Products
SATA II solid state drives will perform all the basic functions of a hard drive but just better in terms of performance and reliability. Unlike SATA II hard drives, SATA II SSDs make use of interconnected flash memory chips to store data unlike the moving parts on HDDs. The flash memory chips are also referred to as NAND which offer higher transfer rates and offer greater reliability and durability. SATA II SSDs are generally smaller and more expensive compared to HDDs.
The serial advanced technology attachment standard has gone through several generations/revisions since it was first developed to replace the parallel ATA (PATA), its predecessor. At each revision, there has been improvements to the standard resulting in better data transfer speeds and performance.
SATA II is the second revision of SATA technology and is variously referred to as SATA 3Gbps or Serial ATA-300 or SATA 2.0 and offers data transfer rates of 3 Gbps and a bandwidth throughput of 300MB/s for HDDs and up to 550 MB/s for SSDs. The significant increase in data transfer speeds in SATA II arises from serial paired lines and support for native command queuing (NCQ). SATA II has backward compatibility SATA I which facilitates ease of use without overhaul of existing hardware.
We have a wide range of SATA II SSDs across different speed offerings and storage capacities to meet all your requirements. Upgrading your hardware by migrating to the SATA2 Solid State Drive will give you a big jump in the performance of servers and workstations as well as PCs. SSDs are able to handle random I/O requests and overall the SATA II SSD will offer a big system tune ups and greater responsiveness in terms of faster system boots, faster large file transfers, and faster launching for apps. Additionally, SSDs are ideal for enterprise and high performance settings since they lower the risk of drive failure owing to their greater MTBF figures. Besides performance gains, SSDs are built for reliability and durability.
The main features of SATA II SSDs are:
- 3 Gbps data throughput
- 2.5" form factor allows use in laptops and other space-constrained server environments
- Native command queuing (NCQ) that helps improve efficiency in the execution order of read and write commands.
- Error correction code reliable data transfer.
- Multi-level cell NAND flash technology for better storage speeds.
- SATA II SSDs are backward compatible with SATA I and forward compatible with SATA III revisions.
- The non-volatile flash memory guarantees data retention and integrity.
- Supports the advanced garbage collection algorithm that helps maintain high performance of the SSD during extended operation.
- Shock resistance and wear leveling support
- Up to 45 times more energy efficient compared to HDDs
Here, you can check more available conditions of your desired product 636458-003 at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
Other Available Categories For - Solid State Drive - SATA-II
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
