Key information of HPE 736939-B21
- HPE 736939-B21 800GB 2.5inch Small Form Factor NVMe PCIe Mainstream Endurance
- Brand Name: HPE
- Model Number or SKU# 736939-B21
- Device Type: Solid State Drive - Hot-Swap
- Capacity: 800 GB
- Form Factor: 2.5 inch SFF
- Interface: PCI Express 3.0 x4 (NVMe)
- Plug Type: Hot Pluggable
- Carrier Type: Smart Carrier NVMe (SCN)
- Workload Type: Write Intensive (WI)
- NAND Flash Memory Type: Multi-Level Cell (MLC)
- Bundled with: HPE Smart Carrier NVMe (SCN)
- Features: Power Loss Protection
- Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
- Height: 15.00 mm (0.60 inch)
Performance of HPE 800GB PCI-E SSD
- Endurance DWPD (Drive Writes Per Day): 10
- MAX Seq Reads Throughput (MiB/s): 2600
- Max Seq Writes Throughput (MiB/s): 1700
- Random Read IOPS (4KiB, Q=16): 155000
- Random Write IOPS (4KiB, Q=16): 99000
- Expansion & Connectivity
- Interfaces: 1 x PCI Express 3.0 x4 (NVMe)
- Compatible Bay: 2.5" SFF
- Min Operating Temperature: 32 °F
- Max Operating Temperature: 140 °F
Dimensions and Weight
- Height : 0.6 inch
- Width : 2.7 inch
- Depth : 3.9 inch
- Weight : 0.35 lbs
Compatibility of 800GB Solid State Drive
- HPE Nimble Storage dHCI Large Solution with HPE ProLiant DL380 Gen10 (2.5inch)
- HPE ProLiant DL Series: DL360 Gen10 Base (2.5inch), DL360 Gen10 Entry (2.5inch), DL360 Gen10 High Performance (2.5inch), DL360 Gen10 Low (2.5inch), DL360 Gen10 Performance (2.5inch), DL360 Gen10 SMB (2.5inch), DL360 Gen10 Solution (2.5inch), DL380 Gen10 (2.5inch), DL380 Gen10 Base (2.5inch), DL380 Gen10 Entry (2.5inch), DL380 Gen10 Entry SMB (2.5inch), DL380 Gen10 for Cohesity DataPlatform (2.5inch), DL380 Gen10 for SAP HANA Compute Block (2.5inch), DL380 Gen10 High Performance (2.5inch), DL380 Gen10 Network Choice (2.5inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5inch), DL380 Gen10 Performance (2.5inch), DL380 Gen10 Server for CTERA (2.5inch), DL380 Gen10 SMB (2.5inch), DL380 Gen10 Solution (2.5inch), DL388 Gen10 (2.5inch), DL388 Gen9 (2.5inch), DL388 Gen9 Base (2.5inch), DL580 Gen9 (2.5inch), DL580 Gen9 Database (2.5inch), DL580 Gen9 SAP HANA Scale-out Base Configuration (2.5inch), DL580 Gen9 SAP HANA Scale-up Base Configuration (2.5inch)
- HPE Synergy 480 Gen10 Base Compute Module (2.5inch), 480 Gen10 Entry Compute Module (2.5inch), 480 Gen10 Performance Compute Module (2.5inch), 480 Gen10 Premium Backplane Compute Module (2.5inch), 480 Gen10 Standard BackPlane Compute Module (2.5inch), 480 Gen10 w/o Drives Compute Module (2.5inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model's matching features with your current system.
About New Bulk Pack Products
The PCI-e solid-state drives are high-speed expansion cards that facilitate the attachment of peripherals to a computer. Peripheral Component Interconnect Express (PCI-e) is a serial expansion bus standard. There are different sizes of PCI-e slots which are dictated by the total sum of bidirectional lanes at the slot. The PCI-e standard acts as the data transport layer in add-in cards and graphics cards.
PCI-e SSD storage is just another alternative to server-side flash deployment. Using PCI-e SSDs directly introduces flash on the server motherboard which means that a device connects to the host via a non-shared serial link. It will, therefore, eliminate bus sharing between devices. The PCI-e interface helps reduce latency and enhances the data transfer speed.
Features of PCI-e SSD Cards
Generally, PCI-e SSD card has a far better performance compared to SATA SSDs and SAS SSDs as well as the fibre channel solid-state drives. Some of the most notable versions of the PCI-e standard are the PCI-e 3.0 released back in November of 2010 and PCI-e 4.0 released back in 2017. PCI-e 4.0 offers a two-fold increase in bandwidth compared to the PCI-e 3.0 revision. The PCI-e 5.0 was released in 2019 with even greater bandwidth to support faster and efficient performance.
Other standards released by the PCI-SIG are the NVMe (non-volatile memory express). NVMe delivers a highly optimized set of commands for easier accessing of PCI-e SSDs. NVMe is all about exploiting parallelism in PCI-e to enhance performance.
Yet another interface is the M.2 SSDs which is a smaller form factor that is designed for expansion cards that are mounted internally in high-performance workstations and servers. It's a replacement to the mSATA and carries four lanes of bandwidth of the PCI-e 3.0 standard.
We have the following wide range of storage capacities for the PCI-e SSDs to meet all your needs. The capacity options we have here at AllHDD are: 100GB, 240GB, 250GB, 256GB, 280GB, 320GB, 365GB, 375GB, 380GB, 400GB, 480GB, 500GB, 512GB, 750GB, 785GB, 800GB, 960GB, 1TB, 1.2TB, 1.27TB, 1.3TB, 1.5TB, 1.6TB, 1.75TB, 1.79TB, 1.86TB, 1.92TB, 2TB, 2.6TB, 3TB, 3.2TB, 3.5TB, 3.84TB, 4TB, 6.4TB, 7.68TB, 8TB, 11TB, 12.8TB, and 15.36TB.
Overall, the lower latency allows PCI-e and NVMe SSDs to provide fast response times in processing and handling large workloads such as those associated with data warehousing and transaction processing. One of the best applications of PCI-e flash is in data centers where read and write access is in microseconds and is able to meet input/output (I/O) requirements. PCI-e SSDs help in surpassing the bottlenecks that are linked with the use of SAS and SATA SSDs especially in guaranteeing performance in frequent file transfer scenarios. The total sum of PCI-e lanes in an SSD determines the effective data transfer speeds. For example, a 16-lane PCI-e 3.0 device will easily achieve 32 Gbps transfer speeds.
Some of the drawbacks associated with the PCI-e SSDs are the prohibitive costs and high power consumption that leads to shorter battery life.