Compatibility of the HPE 861110-001 32GB PC4-19200 ECC 2400MHz RAM with Different Servers and Motherboards
The HPE 861110-001 32GB PC4-19200 ECC 2400MHz RAM is specifically designed for use in HPE ProLiant DL360 Gen10, DL380 Gen10, DL385 Gen10, DL560 Gen10, and DL580 Gen10 servers. This ensures optimal performance and compatibility with these systems.
However, it is also compatible with other servers and motherboards that support DDR4 ECC memory. It is important to check the specifications of the server or motherboard to ensure that it supports DDR4 ECC memory with a speed of 2400MHz and a 288-pin DIMM form factor before purchasing the HPE 861110-001 32GB RAM. It's also important to check the maximum capacity of the memory the board could support.
It is also important to note that the compatibility may vary depending on the specific revision of the product and the firmware version of the server or motherboard. It is always recommended to check the manufacturer's website or consult with their technical support to ensure compatibility before purchasing.
Installation guide for the HPE 861110-001 32GB PC4-19200 ECC 2400MHz RAM
Installing the HPE 861110-001 32GB PC4-19200 ECC 2400MHz RAM into a server or motherboard is a relatively simple process, but it is important to take proper precautions to prevent damage to the memory module or the system.
Here is a general guide for installing the HPE 861110-001 32GB RAM:
- Before installing the RAM, make sure that the system is powered off and unplugged from the power source. Remove the system cover to access the memory slots.
- Locate the memory slots on the motherboard. These are typically located near the CPU and are labeled as DIMM slots.
- Carefully align the notches on the memory module with the notches on the memory slot. Gently press down on the module until it is fully seated in the slot.
- Repeat the process for any additional memory modules that you are installing.
- Replace the system cover and reconnect the power source.
- Power on the system and enter the BIOS or UEFI setup to verify that the system recognizes the new memory.
- Check the memory configuration in the system and make sure that the new memory is being used and is running at the correct speed.
It is important to consult the server or motherboard's manual for detailed instructions, as the process may vary depending on the specific make and model of the system.
It is also important to note that installing memory on a server that is running a virtual environment may require a reboot of the virtual machines, in order to recognize the new memory.
Benefits of using ECC Memory in Servers
Using Error Correcting Code (ECC) memory in servers provides several benefits, such as:
- Data Integrity: ECC memory can detect and correct single-bit errors in memory, which can occur due to a variety of factors such as electromagnetic interference or cosmic rays. This helps to ensure the integrity of the data stored in memory.
- Improved Reliability: ECC memory is more reliable than non-ECC memory because it can detect and correct memory errors, reducing the likelihood of system crashes or data corruption.
- Error Detection: ECC memory can detect multiple-bit errors, which non-ECC memory cannot detect. This allows for early detection of potential memory issues and can help to prevent data loss or system crashes.
- High-Availability: ECC memory is commonly used in High-Availability systems because it can detect and correct memory errors in real-time, which can help to prevent downtime and ensure that mission-critical applications are running smoothly.
- Better Performance: ECC memory can improve system performance by providing a higher level of memory protection and by reducing the need for frequent memory replacement.
- Compliance: Some industries and government regulations require the use of ECC memory in servers and other critical systems to ensure data integrity and to prevent data breaches.
It is important to note that ECC memory is slightly more expensive than non-ECC memory, but the benefits of ECC memory in servers, especially in terms of data integrity, high-availability and compliance, make it a worthwhile investment for many businesses and organizations.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: 861110-001
- Type: Memory (RAM)
- Sub-Type: PC4-19200
- Product Name: 32GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 32GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 32GB
- Bus Speed: 2400MHZ DDR4-2400/PC4-19200
- Data Integrity Check: ECC
- Signal Processing: Registered
- CAS Latency Timings: Cl17
- Features: 2rx4
Compatibility
- Apollo 2000/Apollo 4200/Apollo 45
- 00/Apollo 8000/Bl460c Gen9
- Dl60 Gen9/Dl80 Gen9/Dl120 Gen9/Dl160 Gen9/Dl180 Gen9
- Dl360 Gen9/Dl380 Gen9/Dl388 Gen9(Bto)/Ml110 Gen9
- Ml150 Gen9/Ml350 Gen9/
- Synergy 480 Gen9
Here, you can check more available conditions of your desired product 861110-001 at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
