SAS (Serial Attached SCSI) and SATA (Serial ATA) are two common types of interfaces used for connecting hard drives to computer systems. While both interfaces are used for similar purposes, they differ in a few important ways. Here are some of the key differences between SAS and SATA:
- Speed: SAS generally provides higher data transfer rates than SATA. SAS 12Gbps is currently the fastest interface available, while SATA III (6Gbps) is the fastest SATA interface.
- Scalability: SAS is designed to support larger storage systems and allows for greater scalability than SATA. SAS supports up to 65,535 devices on a single controller, while SATA supports up to 32.
- Reliability: SAS is considered more reliable than SATA due to its higher error detection and correction capabilities, and its ability to handle multiple data transfer requests simultaneously.
- Cost: SAS is generally more expensive than SATA, due to its higher performance and more advanced features.
- Compatibility: SATA is more widely used and compatible with a wider range of systems, while SAS is primarily used in enterprise-level systems and is less common in consumer devices.
- Form factor: SATA is commonly used in both 3.5-inch and 2.5-inch form factors, while SAS is typically used in 2.5-inch form factor drives.
Here are the steps to install an HPE SAS 12Gbps SFF hard drive with tray:
- Shut down the server and unplug it from the power source.
- Open the server chassis and locate the drive bay where you want to install the hard drive.
- Remove the drive tray from the bay by pressing the latch or releasing the screws holding it in place.
- Attach the hard drive to the drive tray using the screws provided with the hard drive or tray. Make sure the drive is securely attached to the tray.
- Slide the drive tray back into the drive bay until it clicks into place. Make sure the tray is properly seated in the bay and is secured with the latch or screws.
- Connect the SAS cable from the back of the hard drive to the SAS controller on the motherboard or controller card.
- Connect the power cable from the power supply to the hard drive. Make sure the cable is properly seated in the connector.
- Close the server chassis and plug the server back into the power source.
- Power on the server and check that the hard drive is recognized by the system.
- Format the hard drive and configure it for use in your system, if necessary.
Note: The specific installation process may vary depending on the server model and configuration. Always refer to the server and hard drive documentation for detailed instructions and safety precautions before attempting to install a hard drive.
How to Upgrade Hard Drives in HPE ServersUpgrading hard drives in HPE servers typically involves the following steps:
- Identify the compatible replacement hard drives: HPE servers have specific compatibility requirements for hard drives. You should check the server documentation or use HPE's compatibility tool to identify the compatible replacement hard drives.
- Plan the upgrade: You should plan the upgrade carefully to minimize any potential downtime. This may involve backing up data, selecting the appropriate RAID level and configuring the storage space on the new hard drives, and planning the migration process.
- Physically replace the hard drives: Turn off the server, open the server chassis, locate the hard drive bays, and remove the old hard drives. Insert the new hard drives in the empty bays and secure them in place.
- Configure the RAID: If you are using RAID, you will need to configure the new hard drives with the appropriate RAID level and rebuild the array. This may require entering the RAID controller configuration utility during the boot process and following the prompts.
- Install the operating system: If you have replaced the boot drive, you will need to reinstall the operating system and any applications that were installed on the old drive. You may need to boot from a recovery disk or USB drive to install the operating system.
- Test and verify: Once the upgrade is complete, you should test the new hard drives to ensure they are functioning correctly. This may involve running diagnostic tools or performing benchmark tests.
Note: These steps are general guidelines for upgrading hard drives in HPE servers. The specific process may vary depending on the server model, operating system, and other factors. Always consult the server documentation and follow recommended best practices to minimize the risk of data loss or system downtime.
Main Specifications
- Manufacturer: Hewlett Packard Enterprise (HPE)
- MPN: 880152-002
- Type: Hard Disk Drive - Hot-swap
- HDD-Type: SAS-12GBPS
- SKU: 880152-002
Technical Information
- Capacity: 600 GB
- Form Factor: 2.5 Sff
- Interface: SAS 12GB/S
- Bytes Per Sector: 512
Features
- Advanced Format 512n, Digitally Signed Firmware
- Bundled With: HPE Smart drive Carrier
- Drive Transfer Rate: 1.2 GBPS (external)
- Seek Time: 2.72 Ms (average) / 5.36 Ms (max)
- Track-to-track Seek Time: 0.22 Ms
- Spindle Speed: 15000 Rpm
- Interfaces: 1 X SAS 12 GB/S
- Compatible Bay: 2.5 Sff
Physical
- Width: 3 In
- Depth: 4.7 In
- Height: 0.6 In
Environmental Parameters
- Min Operating Temperature: 50 °F
- Max Operating Temperature: 95 °F
Compatibility
- HPE Proliant Dl160 Gen9 (2.5), Dl160 Gen9 Base (2.5), Dl160 Gen9 Entry (2.5), Dl160 Gen9 Performance (2.5), Dl20 Gen9 (2.5), Dl20 Gen9 Base (2.5), Dl20 Gen9 Entry (2.5), Dl20 Gen9 Performance (2.5), Dl20 Gen9 Special Server (2.5), Dl360 Gen9 (2.5), Dl360 Gen9 Base (2.5), Dl360 Gen9 Cms (2.5), Dl360 Gen9 Entry (2.5), Dl360 Gen9 Performance (2.5), Dl360 Gen9 Special Server (2.5), Dl380 Gen9 (2.5), Dl380 Gen9 Base (2.5), Dl380 Gen9 Entry (2.5), Dl380 Gen9 High Performance (2.5), Dl380 Gen9 Performance (2.5), Dl380 Gen9 Special (2.5), Dl580 Gen9 (2.5), Dl580 Gen9 Base (2.5), Dl580 Gen9 Database (2.5), Dl580 Gen9 High Performance (2.5), Ml110 Gen9 (2.5), Ml110 Gen9 Base (2.5), Ml110 Gen9 Entry (2.5)
About Refurbished Products
Here, you can check more available conditions of your desired product 880152-002 at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
Other Available Categories For - Hard Drive - SAS-12GBPS
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
