P10214-B21 HPE 1.92TB NVMe Lanes Read Intensive MlC SFF SSD Refurbished

High-Availability and Disaster Recovery

The HPE P10214-B21 1.92TB NVMe Lanes Read Intensive MLC SFF SSD is designed to provide high-availability and disaster recovery solutions for enterprise environments. Here are some ways in which the device can help ensure data availability and protect against data loss:

• Redundant Array of Independent Disks (RAID): The device can be used in a RAID configuration to provide data redundancy, which helps to ensure data availability in the event of a disk failure.
• Dual Port Support: The SSD supports dual port connectivity, which provides redundancy and increased reliability. This helps to ensure that data can be accessed even if one of the ports fails.
• Hot-Swappable: The SSD is hot-swappable, which means it can be replaced without shutting down the system. This provides increased flexibility and helps to reduce downtime.
• Backups: Regular backups of data stored on the device can help to protect against data loss in the event of a disaster. The backups can be stored on another device, such as a tape or disk-based backup system, or in a remote location for disaster recovery purposes.
• Replication: Data stored on the HPE P10214-B21 can be replicated to another device or location for disaster recovery purposes. This helps to ensure that data can be recovered in the event of a disaster at the primary location.
• Clustered Systems: The device can be used in a clustered system, which provides increased availability and failover capabilities. In a clustered system, if one node fails, the other node can take over and ensure that data remains available.

Features and Benefits

The P10214-B21 HPE 1.92TB NVMe Lanes Read Intensive MLC SFF SSD is a high-performance solid state drive (SSD) designed for use in HPE ProLiant servers. The following are the key features and benefits of this drive:

Features:

• NVMe (Non-Volatile Memory Express) interface: This allows for faster data transfer and improved overall performance compared to SATA or SAS-based SSDs.
• Multi-Level Cell (MLC) NAND flash memory: This type of memory provides a good balance between performance, reliability, and cost.
• Read Intensive Design: This drive is designed specifically for read-intensive workloads, such as boot, log files, and virtual machine images.

Benefits:

• Improved Performance: The NVMe interface and read-intensive design of the drive result in faster data access and improved application performance compared to traditional hard disk drives (HDDs).
• Increased Reliability: The use of MLC NAND flash memory provides a higher level of reliability compared to single-level cell (SLC) NAND flash memory.
• Increased Capacity: With a capacity of 1.92TB, this drive provides ample storage for read-intensive workloads.
• High Endurance: This drive is designed for high endurance, providing the ability to handle high write volumes without sacrificing reliability.
• Increased Power Efficiency: The use of NAND flash memory and an NVMe interface results in lower power consumption compared to HDDs, helping to reduce overall power consumption and costs.

Power Management and Energy Efficiency

The HPE P10214-B21 1.92TB NVMe Lanes Read Intensive MLC SFF SSD is designed to provide high-performance storage for enterprise environments, and power management and energy efficiency are important considerations for these types of systems. Here are some ways in which the device can support power management and energy efficiency:

• NVMe Interface: The device uses the NVMe interface, which is designed to be more power-efficient than traditional SATA or SAS interfaces. NVMe uses less power compared to SATA or SAS and provides better performance, making it a more efficient solution for enterprise storage.
• Power-Saving Modes: The device supports power-saving modes, such as DevSleep, which reduces power consumption when the device is not in use. DevSleep allows the device to enter a low-power mode when not in use, which helps to conserve energy and reduce power consumption.
• Energy-Efficient Design: The HPE P10214-B21 is designed to be energy-efficient, with a low-power controller and optimized firmware. This helps to reduce power consumption and improve overall energy efficiency.
• Energy-Efficient Power Supplies: The device should be used with energy-efficient power supplies, which can help to reduce power consumption and improve energy efficiency.
• Monitoring and Management Tools: The device can be managed and monitored using tools such as HPE Integrated Lights Out (iLO) or HPE Systems Manager, which provide real-time information about the device's power consumption and energy usage. This information can be used to optimize the device's energy usage and reduce power consumption.

General Information

• Manufacturer : HPE
• MPN : P10214-B21
• Spare Part Number: P10466-001
• Model Number: VO001920KWVMT
• Assembly Number: P09769-001
• Type : Internal Solid State Drive (SSD)
• SSD Type : NVMe

Technical Information

• Capacity: 1.92TB
• Form Factor: 2.5 inch SFF
• Interface: NVMe U.2 PCIe
• NAND Flash Memory Type: Multi-Level Cell (MLC)
• Connectivity: Single Port
• Plug Type: Hot Pluggable
• Carrier Type: Smart Carrier NVMe (SCN)
• Workload Type: Read Intensive
• Features: Digitally Signed Firmware (DS), x4 Lanes
• Bundled with: HPE Smart Carrier NVMe (SCN)
• Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy

Performance

• Lifetime Writes: 3500
• Endurance DWPD (Drive Writes Per Day): 1.00
• Drive Transfer Rate: PCIe NVMe (External)
• MAX Seq. Reads Throughput (MiB/S): 3400
• MAX Seq. Writes Throughput (MiB/S): 1900
• Random Read Average Latency uSec (4KiB,Q1): 86
• Random Write Average Latency uSec (4KiB,Q1): 29
• Random Read IOPS (4KiB, Q=16): 160000
• Random Write IOPS (4KiB, Q=16): 52000
• MAX Random Read IOPS (4KiB): 720000@Q256
• MAX Random Write IOPS (4KiB): 52000@Q4

Power Consumption

• Idle Time: 6.20 Watt
• Random Read: 10.00 Watt
• Random Write: 10.00 Watt
• Sequential Read: 13.70 Watt
• Sequential Write: 14.90 Watt
• Random Read/Write: 10.00 Watt
• Maximum: 14.90 Watt

Dimensions & Weight

• Height: 5.50 inch (13.97 Cm)
• Width: 7.25 inch (18.41 Cm)
• Depth: 8.75 inch (22.23 Cm)
• Weight: 1.799 lbs (0.82 Kg)

Compatibility

• HPE ProLiant DL Series: DL325 Gen10 (2.5 inch), DL325 Gen10 Base (2.5 inch), DL325 Gen10 Entry (2.5 inch), DL325 Gen10 Performance (2.5 inch), DL325 Gen10 SMB Solution (2.5 inch), DL325 Gen10 Solution (2.5 inch), DL360 Gen10 All Flash Server for Datera (2.5 inch), DL360 Gen10 Entry (2.5 inch), DL360 Gen10 Low (2.5 inch), DL360 Gen10 Network Choice (2.5 inch), DL360 Gen10 Remote Office Branch Office Server for Cohesity DataPlatform (2.5 inch), DL360 Gen10 SMB (2.5 inch), DL360 Gen10 SMB Network Choice (2.5 inch), DL360 Gen10 Solution (2.5 inch), DL380 Gen10 All Flash Server for Datera (2.5 inch), DL380 Gen10 Entry SMB (2.5 inch), DL380 Gen10 for Cohesity DataPlatform (2.5 inch), DL380 Gen10 High Performance (2.5 inch), DL380 Gen10 Hybrid Server for Datera (2.5 inch), DL380 Gen10 Network Choice (2.5 inch), DL380 Gen10 Network Choice for CTERA (2.5 inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5 inch), DL380 Gen10 NVMe All Flash Server for Datera (2.5 inch), DL380 Gen10 Performance (2.5 inch), DL380 Gen10 SMB (2.5 inch), DL380 Gen10 SMB Networking Choice (2.5 inch), DL380 Gen10 Solution (2.5 inch), DL385 Gen10 (2.5 inch), DL385 Gen10 Base (2.5 inch), DL385 Gen10 Entry (2.5 inch), DL385 Gen10 High-Performance (2.5 inch), DL385 Gen10 Performance (2.5 inch), DL385 Gen10 SMB (2.5 inch), DL385 Gen10 Solution (2.5 inch), DL388 Gen10 (2.5 inch), DL560 Gen10 Base (2.5 inch), DL560 Gen10 Performance (2.5 inch), DL580 Gen10 (2.5 inch), DL580 Gen10 Base (2.5 inch), DL580 Gen10 Entry (2.5 inch), DL580 Gen10 Performance (2.5 inch)
• HPE Synergy Series: 480 Gen10 Base Compute Module (2.5 inch), 480 Gen10 Compute Module (2.5 inch), 480 Gen10 Entry Compute Module (2.5 inch), 480 Gen10 Performance Compute Module (2.5 inch), 480 Gen10 Premium Backplane Compute Module (2.5 inch), 480 Gen10 Standard BackPlane Compute Module (2.5 inch), 480 Gen10 w/o Drives Compute Module (2.5 inch), 660 Gen10 Base Compute Module (2.5 inch), 660 Gen10 Compute Module (2.5 inch), 660 Gen10 Entry Compute Module (2.5 inch), 660 Gen10 Performance Compute Module (2.5 inch), 660 Gen10 Premium Compute Module (2.5 inch), 680 Gen9 4S-EX Compute Module (2.5 inch)