The installation and setup instructions for the HPE P19045-K21 64GB 2933MHz PC4-23400 CL21 DDR4 SDRAM ECC Registered RAM would typically include the following steps:
- Before installing the memory, ensure that the server or workstation is powered off and unplugged from the power source.
- Open the server or workstation case and locate the memory slots. These are typically located on the motherboard near the CPU.
- Determine the number and type of memory slots available on your motherboard. The HPE P19045-K21 64GB 2933MHz PC4-23400 CL21 DDR4 SDRAM ECC Registered RAM is a 288-pin DDR4 memory module, so make sure your motherboard has compatible DDR4 memory slots.
- Carefully remove any existing memory modules from the memory slots.
- Carefully align the HPE P19045-K21 64GB 2933MHz PC4-23400 CL21 DDR4 SDRAM ECC Registered RAM module with the memory slot, making sure that the notches on the module match the notches on the slot.
- Gently press down on the module until it snaps into place. The module should be securely seated in the slot and not wiggle.
- Repeat steps 4-6 for any additional memory modules you wish to install.
- Close the server or workstation case and plug the server or workstation back into the power source.
- Power on the server or workstation and wait for it to boot up. The server or workstation should automatically detect the new memory and configure it for use.
- Check the server or workstation's system properties or BIOS settings to confirm that the memory has been detected and is being used by the system.
It is always recommended to consult the server or workstation's manual or the memory module's documentation for specific instructions as the instructions may vary depending on the server or workstation's make and model.
power consumptionThe energy efficiency and power consumption of the HPE P19045-K21 64GB 2933MHz PC4-23400 CL21 DDR4 SDRAM ECC Registered RAM are designed to minimize the power consumption of the server or workstation while in use.
DDR4 memory is known to be more energy-efficient than its predecessor, DDR3. The HPE P19045-K21 64GB 2933MHz PC4-23400 CL21 DDR4 SDRAM ECC Registered RAM runs at a voltage of 1.2V, which is lower than the 1.5V of DDR3 memory, reducing power consumption and heat generation.
The ECC feature provides additional protection against data corruption, however, it increases power consumption as compare to non-ECC RAM. The registered design allows for more memory modules to be installed in a single system which also increases power consumption.
It's important to note that the power consumption of the memory module is just a small part of the overall power consumption of the server or workstation. Factors such as the number and types of other components, the operating system and software, and the workload being run can also significantly impact overall power consumption.
You can check the server or workstation's manual or the memory module's documentation for specific information on power consumption or consult with the manufacturer for more information.
Memory managementMemory management and optimization are important tasks that help ensure that the HPE P19045-K21 64GB 2933MHz PC4-23400 CL21 DDR4 SDRAM ECC Registered RAM is being used effectively and efficiently.
One way to manage and optimize memory usage is by adjusting the memory settings in the server or workstation's BIOS or UEFI firmware. These settings can be used to configure the memory timing, voltage, and other parameters to optimize performance and stability.
Another way to manage and optimize memory usage is through the use of memory management software, such as Windows Task Manager or Resource Monitor on Windows, or the Activity Monitor on MacOS. These tools provide detailed information on the current memory usage and can help identify processes or applications that are using large amounts of memory.
You can also use memory optimization techniques such as caching and compression, which can help reduce the amount of memory that is being used. Caching is the process of temporarily storing frequently used data in a faster storage medium such as RAM so that it can be quickly accessed. Compression is the process of reducing the size of a file or data. Both caching and compression can help reduce the amount of memory that is being used and improve system performance.
It's important to note that it is also important to keep your operating system and drivers up to date, as well as to limit the number of programs running in the background to help reduce memory usage.
It's always recommended to consult the server or workstation's manual or the memory module's documentation for specific instructions as the instructions may vary depending on the server or workstation's make and model.
- Brand Name: HPE
- Model Number or SKU# P19045-K21
- Type: Memory (RAM)
- RAM Type: PC4-21300
- Product Name: 64GB DDR4 SDRAM Memory Module
- Storage Capacity: 64GB
- Memory Type: DDR4 SDRAM Dimm 288-Pin
- Number Of Modules: 1 X 64GB
- Memory Speed: 2933 Mhz (PC4-23400)
- Features: Dual Rank X4, Registered
- Error Checking: Ecc
- Voltage: 1.2 V
- Latency Timings: Cl21 (21-21-21)
- Upgrade Type: System Specific
Physical Characteristics for HPE Memory
- Dimensions (W X D X H): 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model's matching features with your current system.
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
