P22276-K21 HPE 1.92TB NVMe Read Intensive Hot-Swap SSD Bulk New

The Operating System and Driver Support of the P22276-K21 HPE 1.92TB NVMe Read Intensive Hot-Swap SSD refers to the compatibility of the SSD with different operating systems and drivers. An operating system is the software that controls the hardware and software resources of a computer and provides common services for computer programs. A driver is software that allows the operating system to communicate with a hardware device.

In the case of the P22276-K21 HPE 1.92TB NVMe Read Intensive Hot-Swap SSD, it is supported on several operating systems such as Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and VMware vSphere. This means that you can use the SSD with these operating systems without encountering any compatibility issues.

In terms of driver support, the SSD is compatible with the Microsoft NVMe driver for Windows and the NVM Express (NVMe) driver for Linux. These drivers allow the operating system to communicate with the SSD and ensure that it performs optimally.

The P22276-K21 HPE 1.92TB NVMe Read Intensive Hot-Swap SSD is a high-performance storage device designed for use in enterprise-level server systems. It is important to properly maintain and troubleshoot the SSD to ensure its continued performance and reliability.

Here are some common troubleshooting and maintenance tips:

• Check firmware: Ensure that the firmware of the SSD is up-to-date to prevent compatibility issues.
• Compatibility check: Verify that the SSD is compatible with the system it is being used in. Check the manufacturer's compatibility matrix for this information.
• Drive health: Monitor the health status of the SSD using the system's health monitoring tools. If the drive is reporting any problems, replace it with a new one.
• Power cycle: If the system is not recognizing the SSD, try power cycling the server. This involves shutting down the server, unplugging it from the power source, waiting for a few minutes, and then plugging it back in.
• Data transfer rate: Monitor the data transfer rate of the SSD. If it is significantly lower than expected, there may be an issue with the drive.
• Error logs: Check the error logs of the system to identify any issues with the SSD.
• Hot-swap functionality: Ensure that the hot-swap functionality of the SSD is working correctly. If the SSD is not being recognized when hot-swapped, try re-seating the drive.
• SMART attributes: Use a SMART monitoring tool to check the SMART attributes of the SSD. If any attributes are reporting a problem, replace the drive.

Regular maintenance, such as checking for firmware updates and monitoring the health status of the drive, is also recommended to ensure the continued performance and reliability of the SSD. Proper procedures should also be followed when removing or replacing the SSD to prevent any damage to the drive or the system.

The P22276-K21 HPE 1.92TB NVMe Read Intensive Hot-Swap SSD can be used in embedded and edge computing applications.

Embedded computing refers to the use of computers integrated into other devices and products, with the goal of enhancing their functionality. Embedded systems are used in a wide range of applications, including consumer electronics, medical devices, industrial control systems, and automotive systems.

Edge computing, on the other hand, refers to the process of performing data processing and analysis closer to the source of data, rather than in a central data center. Edge computing is often used in applications where real-time data processing and low latency are critical, such as industrial automation, smart cities, and IoT devices.

The P22276-K21 HPE 1.92TB NVMe Read Intensive Hot-Swap SSD, with its high read performance and hot-swap capability, can be used in a variety of embedded and edge computing applications where fast data access and quick replacement of failed storage devices are important. However, it's recommended to check with the manufacturer or the HPE support team for specific recommendations for your use case.

• Brand Name: HPE
• Model Number or SKU# P22276-K21
• Device Type: Solid State Drive - Hot-Swap
• Capacity: 1.92TB
• Form Factor: 2.5-inch SFF
• Interface: NVMe U.3 PCIe
• NAND Flash Memory Type: Triple-Level Cell (TLC)
• Connectivity: Single Port
• Plug Type: Hot Pluggable
• Carrier Type: Smart Carrier NVMe (SCN)
• Workload Type: Read Intensive
• Features: Digitally Signed Firmware (DS), x4 Lanes
• Bundled with: HPE Smart Carrier NVMe (SCN)
• Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
• Height: 15.00 mm (0.60 inch)

• Lifetime Writes: 3424
• Endurance DWPD (Drive Writes Per Day): 1.00
• Drive Transfer Rate: PCIe NVMe (external)
• MAX Seq. Reads Throughput (MiB/s): 7000
• MAX Seq. Writes Throughput (MiB/s): 2500
• Random Read Average Latency uSec (4KiB,Q1): 85
• Random Write Average Latency uSec (4KiB,Q1): 30
• Random Read IOPS (4KiB, Q=16): 195000
• Random Write IOPS (4KiB, Q=16): 115000
• MAX Random Read IOPS (4KiB): 900000@Q256
• MAX Random Write IOPS (4KiB): 900000@Q256
• Expansion and Connectivity
• Interfaces: 1 x PCIe NVMe
• Compatible Bay: 2.5 inch SFF

• Idle Time: 5.00 Watt
• Random Read: 12.90 Watt
• Random Write: 12.90 Watt
• Sequential Read: 13.60 Watt
• Sequential Write: 13.70 Watt
• Random Read/Write: 12.90 Watt
• Maximum: 13.70 Watt

• Height: 11.80 inch
• Width: 7.90 inch
• Depth: 5.90 inch
• Weight: 1.35 lbs

• HPE ProLiant DL Series: DL325 Gen10 (2.5 inch), DL325 Gen10 Base (2.5 inch), DL325 Gen10 Entry (2.5 inch), DL325 Gen10 Performance (2.5 inch), DL325 Gen10 SMB Solution (2.5 inch), DL325 Gen10 Solution (2.5 inch), DL360 Gen10 All Flash Server for Datera (2.5 inch), DL360 Gen10 Low (2.5 inch), DL360 Gen10 Network Choice (2.5 inch), DL360 Gen10 Network Choice for SAP HANA Compute Block (2.5 inch), DL360 Gen10 Premium (2.5 inch), DL360 Gen10 Remote Office Branch Office Server for Cohesity DataPlatform (2.5 inch), DL360 Gen10 Server for CTERA (2.5 inch), DL360 Gen10 SMB (2.5 inch), DL360 Gen10 SMB Network Choice (2.5 inch), DL360 Gen10 Solution (2.5 inch), DL360 Gen10 Special Server (2.5 inch), DL380 Gen10 All Flash Server for Datera (2.5 inch), DL380 Gen10 Entry SMB (2.5 inch), DL380 Gen10 for Cohesity DataPlatform (2.5 inch), DL380 Gen10 Hybrid Server for Datera (2.5 inch), DL380 Gen10 Network Choice (2.5 inch), DL380 Gen10 Network Choice for CTERA (2.5 inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5 inch), DL380 Gen10 NVMe All Flash Server for Datera (2.5 inch), DL380 Gen10 SMB (2.5 inch), DL380 Gen10 SMB Networking Choice (2.5 inch), DL380 Gen10 Solution (2.5 inch), DL385 Gen10 (2.5 inch), DL385 Gen10 Base (2.5 inch), DL385 Gen10 Entry (2.5 inch), DL385 Gen10 High-Performance (2.5 inch), DL385 Gen10 Performance (2.5 inch), DL385 Gen10 SMB (2.5 inch), DL385 Gen10 Solution (2.5 inch), DL580 Gen10 (2.5 inch), DL580 Gen10 Base (2.5 inch), DL580 Gen10 Entry (2.5 inch), DL580 Gen10 Performance (2.5 inch)
• HPE ProLiant ML Series: ML350 Gen10 (2.5 inch), ML350 Gen10 Base (2.5 inch), ML350 Gen10 Entry (2.5 inch), ML350 Gen10 High Performance (2.5 inch), ML350 Gen10 Performance (2.5 inch), ML350 Gen10 SMB (2.5 inch), ML350 Gen10 Solution (2.5 inch), ML350 Gen10 Special Server (2.5 inch), ML350 Gen10 Sub-Entry (2.5 inch)
• HPE Synergy Series: 480 Gen10 Compute Module (2.5 inch), 480 Gen10 Premium Backplane Compute Module (2.5 inch), 480 Gen10 Standard BackPlane Compute Module (2.5 inch), 480 Gen10 w/o Drives Compute Module (2.5 inch), 660 Gen10 Compute Block (2.5 inch), 660 Gen10 Compute Module (2.5 inch), 660 Gen10 Premium Compute Module (2.5 inch)

Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model's matching features with your current system.