High-Performance Storage Solution
The HPE P40493-X21 3.84TB DS SAS-24GBPS SFF NVMe PCIe BC Mixed Use SSD is a high-performance storage solution designed for use in data center environments. It provides a large storage capacity of 3.84TB and utilizes the latest storage technologies to deliver fast and reliable performance.
The SSD is equipped with the NVMe interface, which is a newer, faster interface designed specifically for non-volatile memory (NVM) storage devices like SSDs. NVMe enables high-speed data transfer and low latency, which results in faster read and write speeds compared to other storage interfaces.
The SSD also uses the PCI Express (PCIe) bus for data transfer. PCIe provides a high-speed connection to the host system, which enables fast data transfer between the storage device and the processor. This makes the SSD suitable for use in demanding applications, such as database management and virtualization, where fast data access is critical.
In addition, the HPE P40493-X21 supports the SAS-24GBPS protocol, which is a widely-used interface in data center environments. This compatibility allows the SSD to work with a range of storage systems and enables it to be used in a variety of storage configurations.
The mixed-use design of the SSD makes it suitable for a range of applications, including read-intensive and write-intensive workloads. The small form factor (SFF) design of the SSD makes it suitable for use in dense storage environments, such as in blade servers or hyper-converged infrastructure.
Dynamic Power Management
Dynamic Power Management (DPM) is a technology that helps to conserve energy and reduce power consumption in data storage devices, such as the HPE P40493-X21 3.84TB DS SAS-24GBPS SFF NVMe PCIe BC Mixed Use SSD.
DPM works by adjusting the power consumption of the SSD based on the workload and storage utilization. For example, when the SSD is idle or has low usage, the power consumption is reduced, which saves energy and reduces heat dissipation. When the SSD is under heavy use, the power consumption increases to ensure that performance remains consistent and meets the demands of the workload.
The exact implementation of DPM can vary depending on the manufacturer, but it typically involves using firmware algorithms to dynamically adjust the power consumption of the SSD based on the workload. This can result in significant energy savings and improved system efficiency, especially in data centers and other large-scale computing environments.
Robust Data Protection
The HPE P40493-X21 3.84TB DS SAS-24GBPS SFF NVMe PCIe BC Mixed Use SSD provides robust data protection to ensure the reliability and longevity of stored data. Here are some of the key features that contribute to the robust data protection of the SSD:
- Error Correction Code (ECC): ECC is a technology that detects and corrects data errors in real-time, ensuring the accuracy and integrity of stored data.
- Wear-leveling algorithms: Wear-leveling algorithms distribute write operations evenly across all blocks of the SSD, reducing the risk of data loss due to block wear.
- End-to-end data protection: End-to-end data protection ensures that data is protected from the moment it is written to the SSD to the moment it is read. This helps to prevent data loss in the event of power failures or other types of system failures.
- Over-provisioning: Over-provisioning is a technique used to reserve a portion of the SSD's storage capacity for use as a spare area. This spare area can be used to replace any blocks that become worn or damaged over time, ensuring the longevity and reliability of stored data.
- Power loss protection: Power loss protection helps to prevent data loss in the event of a power failure. The SSD uses capacitors to store energy, which can be used to complete any write operations in progress when power is lost. This helps to prevent data loss and ensure the consistency of stored data.
General Information about this HPE P40493-X21
- Brand Name : HPE
- Part Number or SKU# P40493-X21
- Type: Solid State Drive - SSD
- SSD Type: SAS 24GBPS
Technical Information of HPE 1.6Terabyte Solid State Drive
- Device Type: Solid State Drive - Hot-Swap
- Capacity: 1.6 TB
- Interface: SAS 24GBPS
- NAND Flash Memory Type: Triple-level cell (TLC)
- Workload Type: Read Intensive
- Plug Type: Hot Pluggable
- Connectivity Type: Dual
- Carrier Type: Basic Carrier (BC)
- Form Factor: 2.5 inch SFF
- Bundled with: HPE Basic Carrier (BC)
- Platform Supported: HPE ProLiant Rack
- Features: Digitally Signed Firmware (DS)
Dimensions & Weight of this 24 GBPS SSD
- Height: 5.75 inch
- Width: 8.63 inch
- Depth: 9.00 inch
- Weight: 1.10 lbs
Expansion & Connectivity
- Interfaces: 1 x PCI Express 3.0 x4 (NVMe)
- Compatible Bay: 2.5" SFF
Compatibility Information
- HPE ProLiant DL Series: DL20 Gen10 Plus (2.5inch), DL20 Gen10 Plus Base (2.5inch), DL20 Gen10 Plus Entry (2.5inch), DL20 Gen10 Plus High Performance (2.5inch), DL20 Gen10 Plus Performance (2.5inch), DL325 Gen10 Plus V2 (2.5inch), DL325 Gen10 Plus V2 Base (2.5inch), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5inch), DL325 Gen10 Plus V2 Performance (2.5inch), DL345 Gen10 Plus (2.5inch), DL345 Gen10 Plus Base (2.5inch), DL345 Gen10 Plus Entry (2.5inch), DL360 Gen10 Plus (2.5inch), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5inch), DL360 Gen10 Plus for Weka Base Tracking (2.5inch), DL360 Gen10 Plus Network Choice (2.5inch), DL365 Gen10 Plus (2.5inch), DL380 Gen10 Plus (2.5inch), DL380 Gen10 Plus Network Choice (2.5inch)
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model's matching features with your current system
When it comes to computing, priorities are placed on storage and performance. The hard drive is often viewed as a major storage device. However, there is alternative hardware that can do a perfect job. People now use Solid State Drives as the main storage device for a wide range of technological needs.
An SSD is a nonvolatile storage media that stores data on solid-state flash memory. It emulates the hard disk drive by enhancing servers' capabilities and performance, desktop computers, and other devices. Users view them as the best option for responsiveness, increased disk space, and better performance.
SSD VS HDD
Solid State Drives and hard disk drives are somewhat similar in their physical specification. However, they store data in different ways. HDD stores data magnetically via spinning disk platters. It has an actuator arm with transducers that read and write data on the platter.
On the other hand, an SSD stores data in integrated circuits. It has no moving parts and does not require users to wait for platter movement. They are much smaller and more flexible than hard disk drives - HDDs. Having no physical moving parts and using electrical circuits makes solid-state drives faster than their hard drive counterparts.
Their faster speed makes them more useful when carrying out storage-intensive tasks. Many SSDs also come with PCIe interfaces, which makes them faster than HDDs with SATA interfaces. Also, SSDs are generally more reliable than HDDs. This is because they have no moving parts, and vibration or friction does not affect them.
Data access with SSDs is faster, so they require less power. This results in longer battery life for servers and computers. HDDs, on the other hand, require more power because of their moving disk platters.
How to Do Solid State Drives Work?
Solid State Drives read and write data on interconnected flash memory chips. They come with floating gate transistors (FGRs) that help them hold electrical charges. With the FGRs, SSDs retain information even when power is turned off.
The NAND flash memory stores the data of the SSD. They make use of four NAND cell technologies – single, multi, triple, and Quad-level cells. Single-level cells (SLC) hold one bit of data at a time.
Multi-level cells (MLC) can hold two bits of data per cell. They have more storage space than SLC. Triple-level cells (TLC) hold three bits of data per cell, offering more capacity than the SLC and MLC. The Quad-level cells (QLC) store four bits of data, giving migrating electrons the most significant effect.
Types of SSDs
The types of solid-state drives depend on the way they are used. Some of these devices are installed within the system hardware, while others are connected externally through ports. The common interfaces for SSD connection are:
-
PCIe and NVMe
Users make use of PCI Express (PCIe) to connect graphics cards and related high-performance peripherals. It is an interface with low latency and high bandwidth. Therefore, it is ideal for very fast communication between the SSD and the server.
Nonvolatile Memory Express standard (NVMe) offers higher input-output per second. SSDs that use this connection type run at up to 4,000 MB/s.
-
SATA III and mSATA III
Serial Advanced Technology Attachment (SATA) is an older interface than the PCIe. Their signaling technology allows them to transfer data faster than traditional hard disk drives - HDDs. They have speeds of up to 600MB per second. SATA SSDs also offer the best compatibility and value than the HDD variants.
There are SSDs that are designed for business purposes. They can be external or internal, and they are convenient means of boosting PCs, desktop computers, gaming consoles, and servers.
-
SAS SSD
The Serial-Attached SCSI (SAS) version SSDs provide faster data transfer rates than the SATA SSDs. In general, a SAS SSD provides a dual-port connection and builds in features to improve reliability, high error correction, low data latency, end-to-end data integrity, high signal quality on the cable or backplane which is a NAND flash-based storage and fits in HDDs slot of enclosures. A SAS solid-state drive bandwidth speeds 3Gbps, 6Gbps, and 12Gbps, there are two form factors 2.5 inches and 3.5 inches.
There are SSDs that are designed for business purposes. They can be external or internal, and they are convenient means of boosting PCs, desktop computers, gaming consoles, and servers.
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
