Compatibility and Requirements for Use
"Compatibility and Requirements for Use" for the 00Y8457 IBM CPU System Board PCI Riser Card for x3650 M4 Server would refer to the specific requirements and specifications that must be met in order for the card to function properly within the server. This would include:
- Hardware compatibility: The riser card must be compatible with the specific model of the x3650 M4 server.
- Firmware and software compatibility: The server's firmware and software must be compatible with the riser card.
- Power requirements: The riser card must be powered by the appropriate voltage and amperage.
- Physical space requirements: The riser card must fit within the physical dimensions of the server and have enough clearance for proper cooling.
- Slot requirements: The riser card must be inserted into the appropriate slot on the server's motherboard.
- Operating system compatibility: The riser card must be compatible with the operating system installed on the server.
- Driver requirements: The server must have the appropriate drivers installed for the riser card to function properly.
It's important to consult the server manual or reach out to IBM support to ensure that the 00Y8457 IBM CPU System Board PCI Riser Card is compatible with the specific model of x3650 M4 server you are using and to confirm that all the requirements and specification are met.
Connecting High-Bandwidth Devices
"Connecting High-Bandwidth Devices" refers to the process of connecting peripheral devices to the 00Y8457 IBM CPU System Board PCI Riser Card for x3650 M4 Server that require high data transfer speeds. This might include devices such as:
- Network adapters: High-speed NICs (network interface cards) can be connected to the riser card to provide faster network connectivity for the server.
- Storage devices: High-speed storage devices, such as solid-state drives (SSDs) or high-performance SAS (Serial Attached SCSI) drives, can be connected to the riser card to provide faster data access speeds.
- Graphics cards: High-performance graphics cards can be connected to the riser card to provide faster video rendering and improved graphics performance.
- PCI Express (PCIe) devices: High-bandwidth devices that use the PCIe interface, such as NVMe SSDs, can be connected to the riser card to provide faster data access speeds.
- External devices: External devices such as storage arrays or network-attached storage (NAS) can be connected to the riser card to provide faster data access speeds and increased storage capacity.
When connecting high-bandwidth devices to the riser card, it's important to ensure that the devices are compatible with the server and that the necessary drivers and software are installed. Additionally, you should also check to see if there are any additional power requirements for the devices and that the power supply of the server can handle the load.
Monitoring System Performance
"Monitoring System Performance" refers to the process of observing and measuring the performance of the 00Y8457 IBM CPU System Board PCI Riser Card for x3650 M4 Server over time. This can help identify and diagnose any potential issues and ensure that the system is operating at optimal performance levels. Some methods for monitoring system performance include:
- System Event Logs: The server's event logs can provide information on system events and errors that can help identify potential issues.
- Performance Counters: Operating system performance counters can be used to monitor key system metrics such as CPU usage, memory usage, disk I/O, and network usage.
- System Management Software: IBM Systems Director, IBM Integrated Management Module(IMM) or other management software can be used to monitor system performance and provide alerts for potential issues.
- Resource Utilization: Monitor the usage of the resources such as CPU, Memory, and Disk I/O, to ensure that the system is not running out of resources, which can cause performance issues.
- Third-Party Tools: Third-party monitoring tools can be used to monitor system performance and provide additional insights into system behavior.
- Temperature: Monitor the temperature of the server by checking the internal sensors or using external monitoring tools to ensure that the system is not overheating, which can cause performance issues.
- Network Utilization: Monitor the network utilization, this include the bandwidth, the number of packets and the errors, to ensure that the network is not a bottleneck.
It's important to establish a regular monitoring schedule and to keep track of performance metrics over time to spot any trends or changes in performance. This can help identify and diagnose any potential issues early on and take action to prevent them from becoming more serious problems.
Network Connectivity and Configuration
"Network Connectivity and Configuration" refers to the process of connecting the 00Y8457 IBM CPU System Board PCI Riser Card for x3650 M4 Server to a network and configuring the network settings to optimize performance and ensure proper communication with other devices on the network. Some subheadings for this topic could include:
- Network Interface Configuration: Configuring the server's network interfaces, including IP addresses, subnet masks, and gateway settings.
- VLAN Configuration: Configuring virtual LANs (VLANs) to segment the network and improve security.
- Link Aggregation: Configuring link aggregation to increase network bandwidth and improve fault tolerance.
- Quality of Service: Configuring Quality of Service (QoS) settings to prioritize different types of network traffic and ensure that critical applications receive the bandwidth they need.
- Firewall Configuration: Configuring the server's firewall to control inbound and outbound network traffic and improve security.
- Remote Management: Configuring remote management options, such as SSH or Remote Desktop, to allow administrators to access the server remotely.
- DNS Configuration: Configuring the server's DNS settings to resolve domain names to IP addresses.
- DHCP Configuration: Configuring the server's DHCP settings to automatically assign IP addresses to devices on the network.
- NTP Configuration: Configuring the server's NTP settings to synchronize the system clock with an NTP server.
- TCP/IP Optimization: Optimizing TCP/IP settings to improve network performance and reduce latency.
- Router Configuration: Configuring the router to forward traffic to the server and ensure that the network is properly configured.
- Switch Configuration: Configuring the switch to ensure that the network is properly configured and that the server is properly connected to the network.
- Load balancer Configuration: Configuring a load balancer to distribute network traffic across multiple servers and improve performance.
- WAN Configuration: Configuring the server to communicate over a wide-area network (WAN) and ensure that the network is properly configured.
- VPN Configuration: Configuring virtual private networks (VPNs) to secure network communications and allow remote access to the server.
It is important to understand the network infrastructure and the devices that are part of the network, to ensure that the server is properly configured and that the network is optimized for performance and security.
General Information
- MPN : 00Y8457
- Brand Name: IBM
- Type: Motherboard
- SKU : 00Y8457
About Refurbished Products
Server Motherboard
The server motherboard coordinates and houses the vital components of the server from the CPU (Central Processing Unit) to the chipset, the PCIe slots, and all the RDIMM sockets. It can also be called a multiprocessor or systems board. A server motherboard hosts communications between the Server CPU and other systems connected to the server via a network which could be a server database, applications server, or web server. The server motherboard unlike a desktop motherboard typically has more than one microprocessor due to the workload as a lot of processes are always running in the background. Hence, it has more cores and threads for efficient data processing.
Server Board Components
- CPU support: these days, the memory controller is built directly into the CPU, therefore allowing it to support different memory speeds. That is why CPU count and the CPU type become important. For instance, Intel's Motherboard is only compatible with Intel processors. Hence, an LGA 771 CPU must be installed on an LGA 771 motherboard.
- Processor slots: Some motherboards can have two or more processors. Subject to server and processor type, the installation of the processor could be in a ZIF socket, a single-processor cartridge, or a patented multiprocessor cartridge. These days, server processors are socketed. Server boards based on ATX, BTX, and other form factors can also support up to 4 processors as the motherboard to be used in a server is influenced by the number of processors.
- Chipset: Although your motherboard may have a similar form factor with another server board, the components for compatibility depend on the chipset of the motherboard itself. It is made up of the north and south bridges. The northbridge is the chip controlling the channel of communication between the CPU, Memory, PCIe, and the southbridge. While the southbridge connects the input and output devices like the USBs, SATA, Bus, and others. It also regulates power management. Some server boards also have other chips for more functions like network control, PCI-X control, etc. The server motherboard's chipset supports memory ECC (error-correcting code) and Registered SDRAM and DDR RAM. It also supports PCI-X expansion slots
- iv.DIMM (RAM) sockets
At ALLHDD, you will find the best server motherboards for the following servers and sockets: PowerEdge, ProLiant, Socket 1150, Socket 2011, Socket 604, Socket R3, and others.
Also, we have components for:
- Blade server: this is a server used as a channel between programs, and systems amongst others. We have the most compatible versions of the server board for this machine, so check our catalog.
- BladeCenter: we also offer server boards for BladeCenter servers. Such as 68Y8163 IBM - System Board.
- LGA 1150: we also offer server boards with the Socket H3, a product for Intel's central processing units (CPUs).
- LGA 1366: the socket B whose number of pins is indicated by 1366, this is a motherboard produced by Intel. If you need a server board that's compatible with this socket check out X8DTU-F Supermicro Dual LGA1366 Server Board.
- LGA 2011: better known as socket R and produced by intel as a replacement for Socket B. it has its memory controller and PCIe integrated into the CPU. For server boards compatible with this socket, check out our stock.
Check our server motherboards categories and other server products now, or contact our customer support if you need assistance.
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.