Dell SNPY898NC/16G 16GB RAM 1066MHz PC3-8500 240-Pin DDR3 Bulk

In the ever-evolving world of technology, servers play a crucial role in powering various applications, websites, and services. The performance of a server relies heavily on its hardware components, and one such critical element is the memory module. This article delves into the details of the Dell SNPY898NC/16G 16GB memory module, exploring its specifications, features, and significance in the context of server performance.

Before we delve into the specifics of the Dell SNPY898NC/16G memory module, let's break down the technical jargon that might seem daunting at first glance:

• Capacity: 16GB - This indicates the amount of data the memory module can store.
• Configuration: 1X16GB - Denotes a single memory module with a capacity of 16GB.
• Speed: 1066MHz - Refers to the speed at which data is transferred between the memory module and the rest of the system, measured in megahertz (MHz).
• Type: PC3-8500 - Indicates the type of DDR3 memory and its theoretical peak bandwidth.
• Form Factor: 240-Pin - Describes the physical design of the memory module's connector.
• Rank: 4Rx4 - Specifies the organization of memory chips on the module, with 4 ranks of memory, each 4 bits wide.
• CAS Latency: CL7 - Represents the CAS (Column Address Strobe) latency, indicating the delay between the moment a memory controller requests data and when it is available.

ECC, or Error-Correcting Code, is a crucial feature in server memory. Servers handle a vast amount of data and perform critical tasks, making data integrity paramount. ECC memory is designed to detect and correct errors that may occur during data storage or retrieval. This is particularly important in server environments where data accuracy is non-negotiable.

The Dell SNPY898NC/16G memory module comes equipped with ECC technology, ensuring a higher level of reliability compared to non-ECC memory. This feature makes the memory module capable of identifying and rectifying single-bit errors, preventing potential data corruption.

The speed of a memory module, expressed in megahertz, determines how quickly data can be read from and written to the module. In the case of the Dell SNPY898NC/16G, the 1066MHz speed ensures efficient data transfer, contributing to the overall performance of the server. This is particularly advantageous in scenarios where rapid data access is critical, such as in database servers and virtualization environments.

The memory type, PC3-8500 in this case, represents DDR3 technology. DDR3 (Double Data Rate 3) is a standard for synchronous dynamic random-access memory (SDRAM) that has been widely used in servers and other computing systems. The PC3-8500 specification specifically denotes the peak bandwidth of the memory module, indicating its data transfer capabilities.

DDR3 technology offers improvements over its predecessors, providing higher data transfer rates, lower power consumption, and increased overall system performance. While newer memory standards like DDR4 and DDR5 exist, DDR3 is still relevant and widely used, especially in older server architectures.

The form factor of a memory module refers to its physical size and connector design. The Dell SNPY898NC/16G follows the 240-pin form factor, which is a standard for DDR3 memory modules. This form factor ensures compatibility with servers designed to accommodate DDR3 memory.

Before purchasing a memory module, it is essential to verify that it matches the form factor supported by the server's memory slots. The 240-pin design of the Dell SNPY898NC/16G makes it suitable for a variety of server configurations.

The organization of memory ranks plays a crucial role in the module's performance and efficiency. In the case of the Dell SNPY898NC/16G, the 4Rx4 configuration signifies that the memory module has four ranks, each consisting of 4 bits. This advanced organization enhances the memory module's ability to handle data, providing improved parallelism and data throughput.

The 4Rx4 organization is particularly beneficial in server environments where multitasking and simultaneous data access are common. It contributes to a more efficient utilization of the memory module's capacity and speed, optimizing overall system performance.

CAS latency, expressed as CL followed by a number, represents the delay between the memory controller requesting data and the data being available. In the case of the Dell SNPY898NC/16G, the CL7 CAS latency indicates a relatively low latency, signifying that the memory module can quickly respond to data requests.

Low CAS latency is advantageous in scenarios where responsiveness is critical, such as in real-time computing applications. The combination of a low CAS latency and high-speed data transfer makes the Dell SNPY898NC/16G well-suited for demanding server workloads.

Upgrading server memory, such as adding the Dell SNPY898NC/16G memory module, can yield several benefits for system performance and overall efficiency:

Additional memory allows servers to handle a greater number of concurrent tasks and processes. This is particularly beneficial in environments with resource-intensive applications, virtualization, or large-scale database operations. The 16GB capacity, combined with the 1066MHz speed and advanced organization of the Dell SNPY898NC/16G, contributes to a noticeable improvement in overall server performance.

Servers often need to handle multiple tasks simultaneously. Upgrading memory enables the server to manage these tasks more efficiently, reducing the likelihood of performance bottlenecks. The 4Rx4 organization of the Dell SNPY898NC/16G adds a layer of efficiency in handling simultaneous data access, making it well-suited for multitasking scenarios.

Data Reliability and Integrity

The ECC feature of the Dell SNPY898NC/16G plays a crucial role in maintaining data reliability and integrity. By detecting and correcting errors, ECC memory ensures that the data stored in the server's memory remains accurate. This is particularly important in critical applications where data accuracy is paramount, such as financial transactions or scientific computations.

Future-Proofing

As software and applications evolve, they often demand more resources. Upgrading server memory is a proactive step in future-proofing the server infrastructure. The Dell SNPY898NC/16G, with its DDR3 technology and 16GB capacity, provides a balance of performance and capacity that aligns with the requirements of many contemporary and legacy server applications.

• Manufacturer: Dell
• Model Number or SKU# SNPY898NC/16G
• Type: Memory (RAM)
• RAM Type: PC3-8500
• Product Name: 16GB DDR3 SDRAM Memory Module

• Storage Capacity: 16GB
• Memory Technology: DDR3 SDRAM
• Number of Modules: 1 x 16GB
• Memory Speed: 1066MHz DDR3-1066/PC3-8500
• Data Integrity Check: ECC
• Signal Processing: Registered
• Form Factor: 240-pin DIMM

• PowerEdge C1100
• PowerEdge C2100
• PowerEdge C6100
• PowerEdge C6105
• PowerEdge C6145
• PowerEdge C6220
• PowerEdge M610
• PowerEdge M610x
• PowerEdge M710
• PowerEdge M710hd
• PowerEdge M915
• PowerEdge R410
• PowerEdge R415
• PowerEdge R510
• PowerEdge R515
• PowerEdge R715
• PowerEdge R810
• PowerEdge R910
• PowerEdge T410

Finally, the Dell SNPY898NC/16G 16GB memory module is a powerful component designed to enhance the performance and reliability of server systems. With its 16GB capacity, 1066MHz speed, DDR3 technology, ECC support, 240-pin form factor, and advanced 4Rx4 organization, this memory module is well-suited for a variety of server applications.

Understanding the technical specifications and features of the Dell SNPY898NC/16G is essential for making informed decisions when upgrading server memory. Whether you are looking to boost performance, support multitasking, ensure data reliability, or future-proof your server infrastructure, the Dell SNPY898NC/16G proves to be a valuable investment in optimizing your server's capabilities.