Micron MT16KTF1G64HZ-1G6E1 8GB RAM 1600MHz PC3-12800 ECC Bulk

The MT16KTF1G64HZ-1G6E1 is an 8GB memory module produced by Micron Technology Inc. It belongs to the DDR3 SDRAM family and is designed to operate at a clock frequency of 1600 MHz. The MT16KTF1G64HZ-1G6E1 is a non-ECC (Error Correcting Code) unbuffered RAM module, which means that it does not have error-checking or correction capabilities. In this article, we will discuss the technical specifications, features, and benefits of this RAM module.

In the ever-evolving landscape of computer hardware, the Micron MT16KTF1G64HZ-1G6E1 8GB RAM Module stands out as a reliable and efficient memory solution. This guide provides an in-depth exploration of its features, specifications, and benefits, ensuring you have the information needed to make an informed decision for your system.

The MT16KTF1G64HZ-1G6E1 is a DDR3 SDRAM memory module with a capacity of 8GB. It has a clock frequency of 1600 MHz and a data transfer rate of 12800 MB/s. The module is designed to operate at a voltage of 1.5 volts, which is the standard voltage for DDR3 memory. The MT16KTF1G64HZ-1G6E1 is a 240-pin unbuffered RAM module and is compatible with DDR3 DIMM slots.

• Micron, a renowned player in the semiconductor industry, is the proud producer of the MT16KTF1G64HZ-1G6E1 8GB RAM Module. With a reputation for high-quality components, Micron delivers cutting-edge solutions for diverse computing needs.

• This alphanumeric identifier, MT16KTF1G64HZ-1G6E1, serves as a unique product code, facilitating easy identification and compatibility verification.

• The MT16KTF1G64HZ-1G6E1 belongs to the DDR3 Synchronous Dynamic Random Access Memory (SDRAM) family, providing a robust 8GB capacity for enhanced system performance.

• At the heart of this RAM module is its impressive bus speed of 1600MHz. Operating under the DDR3-1600 standard, also recognized as PC3-12800, this module ensures swift and efficient data transfer within your system.

• Unlike some memory modules that employ Error-Correcting Code (ECC) for data integrity checks, the MT16KTF1G64HZ-1G6E1 follows a Non-ECC design. While ECC is essential for critical applications, non-ECC solutions are preferred in scenarios where error correction is not a primary concern.

• Understanding the signal processing of a RAM module is crucial for optimal system compatibility. The MT16KTF1G64HZ-1G6E1 utilizes an unbuffered design, establishing a direct connection to the memory controller for streamlined performance. Additionally, it features a dual rank architecture, enhancing memory efficiency and responsiveness.

• Column Address Strobe (CAS) latency, expressed as CL11 for this module, indicates the number of clock cycles required to access stored data. A lower CAS latency contributes to faster data retrieval, positively impacting overall system speed.

• Efficient power consumption is a key consideration in modern computing. The MT16KTF1G64HZ-1G6E1 operates at a voltage of 1.5 volts, striking a balance between performance and energy efficiency.

• Micron's commitment to quality is evident in the reliability and durability of the MT16KTF1G64HZ-1G6E1. Rigorous testing procedures ensure that this module meets industry standards for stability and performance.

• With a generous 8GB capacity and a high bus speed of 1600MHz, the MT16KTF1G64HZ-1G6E1 contributes significantly to enhanced system performance. Whether you're engaged in resource-intensive tasks or multitasking, this module provides the responsiveness needed for a seamless computing experience.

• The MT16KTF1G64HZ-1G6E1's unbuffered design and dual-rank architecture enhance compatibility across a wide range of systems. Whether you're upgrading an existing setup or building a new one, this module seamlessly integrates into various configurations.

• Operating at a voltage of 1.5 volts, the MT16KTF1G64HZ-1G6E1 strikes a balance between performance and energy efficiency. This is especially crucial for users conscious of power consumption and looking to build eco-friendly computing systems.

• Identify the available RAM slots on your motherboard. These are typically DIMM (Dual Inline Memory Module) slots.

• Before handling the RAM module, ground yourself to discharge any static electricity. This prevents potential damage to sensitive electronic components.

• Align the notches on the RAM module with the notches on the DIMM slot. Gently insert the module into the slot, applying equal pressure on both sides until it clicks into place.

• The DIMM slots have clips on each side to secure the RAM module. Once the module is properly seated, the clips should automatically lock in place.

• Power on your system and access the BIOS or operating system to verify that the RAM module is detected. If recognized, you've successfully installed the Micron MT16KTF1G64HZ-1G6E1.

• The MT16KTF1G64HZ-1G6E1 is designed for broad compatibility with systems supporting DDR3 SDRAM. However, it's advisable to check your motherboard's specifications to ensure compatibility.

• While it's possible to mix RAM modules, it's recommended to use identical modules for optimal performance. Mixing modules with different specifications may result in suboptimal performance or compatibility issues.

• Dual-rank architecture enhances memory efficiency by providing additional ranks for memory access. This can lead to improved multitasking performance and overall system responsiveness.

• Ensure that the module is properly seated in the DIMM slot, and the clips are securely fastened. If issues persist, try reseating the module or testing it in another compatible system.

The MT16KTF1G64HZ-1G6E1 has several features that make it an ideal choice for computer users who require a high-performance and reliable RAM module. One of the key features of this RAM module is its high-speed performance. With a clock frequency of 1600 MHz and a data transfer rate of 12800 MB/s, it can handle even the most demanding applications and tasks with ease.

Another feature of the MT16KTF1G64HZ-1G6E1 is its ECC (Error Correcting Code) unbuffered design. Although this RAM module is non-ECC, it still provides a certain degree of error checking and correction. This means that it can detect and correct some errors that may occur during data transfer, which can help to improve system stability and reliability.

The MT16KTF1G64HZ-1G6E1 is also designed to operate at a low voltage of 1.5 volts, which means that it consumes less power than other DDR3 memory modules. This makes it an energy-efficient choice for computer users who are concerned about power consumption and environmental impact.

The MT16KTF1G64HZ-1G6E1 provides several benefits to computer users who require a high-performance and reliable RAM module. One of the key benefits of this RAM module is its high-speed performance, which can help to improve overall system performance and responsiveness. With a clock frequency of 1600 MHz and a data transfer rate of 12800 MB/s, it can handle even the most demanding applications and tasks with ease.

Another benefit of the MT16KTF1G64HZ-1G6E1 is its ECC unbuffered design, which provides a certain degree of error checking and correction. This can help to improve system stability and reliability.

• Manufacturer: Micron
• Model Number or SKU# MT16KTF1G64HZ-1G6E1
• RAM Type: PC3-12800

• Bus Speed: 1600MHZ DDR3-1600/PC3-12800
• Data Integrity Check: Non-ECC
• Signal Processing: Unbuffered, Dual Rank
• CAS Latency Timings: CL11
• Voltage: 1.5

In summary, the Micron MT16KTF1G64HZ-1G6E1 8GB RAM Module represents a robust solution for users seeking reliable and efficient memory upgrades. Its impressive technical specifications, compatibility features, and ease of installation make it a valuable addition to diverse computing setups. Whether you're a casual user or a power user engaged in resource-intensive tasks, the MT16KTF1G64HZ-1G6E1 offers the performance and reliability you can trust. Upgrade your system with Micron's quality memory module and experience a noticeable boost in overall efficiency and responsiveness.