AIM-VPN/HPII-PLUS Cisco VPN Encryption/ Compression Module Refurbished

The AIM-VPN/HPII-PLUS Cisco VPN Encryption/Compression Module is a hardware module designed to provide enhanced encryption and compression capabilities to Cisco routers. This module is used to provide secure Virtual Private Network (VPN) connections between remote sites, enabling data to be transmitted securely over unsecured networks such as the Internet.

Encryption is the process of converting data into a code that can only be read by authorized parties. The AIM-VPN/HPII-PLUS module uses the Advanced Encryption Standard (AES) to encrypt data transmitted over the VPN. AES is a widely used encryption standard that provides strong encryption and is considered to be very secure.

Compression is the process of reducing the size of data by removing unnecessary bits or redundancies. The AIM-VPN/HPII-PLUS module uses the Layer 2 Tunneling Protocol (L2TP) to compress data transmitted over the VPN. L2TP is a protocol used to create VPN tunnels and is designed to work with a variety of encryption protocols, including AES.

The AIM-VPN/HPII-PLUS module provides hardware-based encryption and compression, which can provide faster processing and better performance than software-based encryption and compression. The module also supports a range of VPN protocols, including IPsec, SSL, and PPTP, which allows it to work with a variety of VPN clients and servers.

The AIM-VPN/HPII-PLUS Cisco VPN Encryption/Compression Module is a hardware module that can be installed in a Cisco router to provide VPN (Virtual Private Network) encryption and compression capabilities. The module is designed to provide secure communication over a public network such as the Internet by encrypting and compressing data before it is transmitted.

Deployment Options: The AIM-VPN/HPII-PLUS module can be deployed in two main ways: as a standalone device or as part of a VPN concentrator. As a standalone device, the module is installed in a router and provides VPN encryption and compression capabilities to that router. As part of a VPN concentrator, the module is installed in a device that is specifically designed to handle VPN traffic and can provide encryption and compression capabilities to multiple routers.

Considerations: When deploying the AIM-VPN/HPII-PLUS module, there are several considerations to keep in mind:

• Compatibility: The module is compatible with a range of Cisco routers, but it is important to ensure that it is compatible with the specific router being used.
• Capacity: The module has a maximum capacity of 1000 tunnels, so it is important to ensure that it can handle the expected traffic volume.
• Security: The module provides encryption capabilities, but it is important to ensure that the encryption method used is secure and appropriate for the level of security required.
• Performance: The module provides compression capabilities, but it is important to ensure that the compression method used does not negatively impact performance.
• Management: The module can be managed using Cisco IOS commands or via a web-based interface. It is important to ensure that the module is properly configured and managed to ensure optimal performance and security.

The AIM-VPN/HPII-PLUS module is a Cisco VPN Encryption/Compression module that can be used to add hardware-based encryption and compression capabilities to Cisco routers. This module can be installed in compatible routers and used to encrypt and compress data packets that are transmitted over a Virtual Private Network (VPN).

To set up and configure the AIM-VPN/HPII-PLUS module, follow these steps:

• Install the module: First, make sure that your router is compatible with the AIM-VPN/HPII-PLUS module. Then, install the module in an available slot on the router. Consult the router documentation for specific instructions on how to do this.
• Enable the module: Once the module is installed, you need to enable it in the router configuration. This can typically be done using the router's command-line interface (CLI). Enter the following command to enable the module:router(config)# crypto engine slot slot-numberReplace "slot-number" with the number of the slot in which the module is installed.
• Configure encryption: Next, you need to configure the encryption settings for the VPN. The AIM-VPN/HPII-PLUS module supports a variety of encryption algorithms, including AES, 3DES, and DES. You can configure the encryption settings using the following command:router(config)# crypto isakmp policy policy-number router(config-isakmp)# encryption encryption-typeReplace "policy-number" with a number between 1 and 65535 to identify the policy, and "encryption-type" with the desired encryption algorithm.
• Configure compression: If you want to use compression to reduce the size of data packets transmitted over the VPN, you can configure the compression settings using the following command:router(config)# crypto ipsec transform-set transform-set-name transform-type router(cfg-crypto-trans)# compression {ipcomp | deflate}Replace "transform-set-name" with a name for the transform set, and "transform-type" with the desired encryption algorithm. Then, select either "ipcomp" or "deflate" for the compression algorithm.
• Create VPN tunnel: Finally, you need to create a VPN tunnel to use the AIM-VPN/HPII-PLUS module. This can be done using the following command:router(config)# crypto map map-name sequence-number ipsec-isakmp router(config-crypto-map)# set peer remote-ip-address router(config-crypto-map)# set transform-set transform-set-name router(config-crypto-map)# match address access-list-numberReplace "map-name" with a name for the crypto map, "sequence-number" with a number between 1 and 65535 to identify the sequence, "remote-ip-address" with the IP address of the remote VPN endpoint, and "access-list-number" with the number of an access list that defines the traffic to be encrypted and transmitted over the VPN.

These are the basic steps for setting up and configuring the AIM-VPN/HPII-PLUS module. However, depending on your specific requirements, you may need to configure additional settings and options. Consult the router documentation and Cisco support resources for more information.

• Manufacturer Cisco Systems, Inc
• Manufacturer Part Number AIM-VPN/HPII-PLUS
• Brand Name Cisco
• Product Model AIM-VPN/HPII-PLUS
• Product Name DES/3DES/AES VPN Encryption AIM High Performance
• Product Type Advanced Integration Module

Technical Information

• Application/Usage Voice
• Miscellaneous:
• Additional Information -
• Reserves critical processing resources for other services such as routing, firewall, and voice
• Scales encryption use for large networks requiring secure connections between multiple sites
• Significantly reduces the system costs, management complexity
• Hardware-Based AES, with 128,192, and 256 Keys
• IPSec Hardware-based Compression, Layer 3 IPPCP LZS

Compatibility

• Supported Platforms & Minimum IOS Versions:
• Cisco 3845 - 12.3(11)T
• Cisco 3660 series - 12.3(7)T
• Cisco 2851
• Cisco 2821
• Cisco 2811
• Cisco 3745
• Cisco 2801
• Cisco 1841
• Cisco 3825
• Cisco 3725
• Cisco 3640
• Cisco 3620
• Cisco 2691
• Cisco 2651
• Cisco 2650
• Cisco 2600XM Series
• Cisco 2600 Series
• Cisco 1760
• Cisco 1751
• Cisco 1721