The 8FE-FX-SC-B is an expansion module for the Cisco GSR (Gigabit Switch Router) that provides 8 additional ports with a speed of 100 Mbps. Each port is equipped with an FX SC connector, which is a fiber optic connector that uses a standard 2.5 mm ferrule to connect to the fiber optic cable.
Here are the main features and specifications of the 8FE-FX-SC-B module:
- Port density: The module provides 8 additional ports, allowing you to expand your network connectivity.
- Speed: Each port supports a maximum speed of 100 Mbps, which is suitable for many applications that don't require gigabit speeds.
- Fiber optic connectivity: The module uses FX SC connectors, which are commonly used in fiber optic networks. These connectors are reliable and can transmit data over longer distances than copper cables.
- Hot-swappable: The module is hot-swappable, meaning you can insert or remove it from the GSR without powering down the router.
- Compatibility: The module is compatible with the Cisco GSR 12000 series routers.
- Dimensions: The module measures 1.5 inches in height, 14 inches in width, and 16 inches in depth.
- Power consumption: The module consumes a maximum of 38 watts of power.
- Operating temperature: The module can operate within a temperature range of 0°C to 40°C.
The 8FE-FX-SC-B Cisco GSR 8 Ports 100 MBPS FX SC connector Expansion module is an add-on card that can be installed into a Cisco GSR router to expand its connectivity options. This module provides 8 Fast Ethernet (FE) ports with 100 Mbps data transfer rate each, using FX SC connector interfaces.
Here are the steps to install and set up the 8FE-FX-SC-B expansion module:
- Turn off the Cisco GSR router and unplug it from the power source.
- Insert the expansion module into an available slot on the router.
- Secure the module into place with the screws provided.
- Reconnect the power supply and turn on the router.
- Verify that the router recognizes the module by checking the system logs or using the "show version" command.
- Configure the module using the command line interface (CLI) of the router.
To configure the module, you can follow these steps:
- Access the router CLI by connecting to the console port or using a remote management tool.
- Enter configuration mode by typing "configure terminal" command.
- Enter the interface configuration mode for the expansion module by typing "interface gigabitEthernet" followed by the module number and port number (e.g., interface gigabitEthernet 5/1).
- Configure the interface settings such as IP address, subnet mask, and default gateway using appropriate commands.
- Save the configuration changes by typing "copy running-config startup-config" command.
Repeat these steps for each port on the expansion module that you want to configure.
Performance and ReliabilityThe 8FE-FX-SC-B is an expansion module designed for use with Cisco's GSR (Gigabit Switch Router) line of products. This module provides eight additional ports for 100 Mbps Ethernet connections, using an FX (fiber optic) interface with SC connectors.
Performance-wise, the 8FE-FX-SC-B expansion module provides non-blocking switching performance, which means that it can forward traffic at wire speed across all eight ports simultaneously without any loss or delay. This makes it ideal for use in high-traffic network environments where reliability and speed are critical.
The use of fiber optic connections also enhances the reliability of the module, as it provides increased resistance to interference and longer transmission distances compared to copper-based connections. The SC connector is a popular choice for fiber optic connections due to its simplicity and durability.
General Information- Manufacturer: Cisco Systems, Inc
- Manufacturer Part Number: 8FE-FX-SC-B
- Brand Name: Cisco
- Product Model: 8FE-FX-SC-B
- Product Name: GSR 8-port 100baseFX SC connector
- Device Type: Expansion moduleForm Factor: Plug-in module
- Ports: 10/100 Ethernet x 8
- Connectivity Technology: Wired
- Cabling Type: Ethernet 100Base-FX
- Data Link Protocol: Fast Ethernet
- Data Transfer Rate: 100 Mbps
- Optical Wave Length: 1300 nm
- Remote Management Protocol: SNMP
- Status Indicators: Power, transmit, receive, link/activity
- Features: Full duplex capability, VLAN support
- Compliant Standards: IEEE 802.3u, IEEE 802.1Q
- Interfaces: 8 x 100Base-FX - SC multi-mode - x 2
- Compatible Slots: 1 x expansion slot
- Compliant Standards: FCC Class A certified, CSA, EN 60950, EN55022, UL 1950, VCCI-I
- Min Operating Temperature: 32 °F
- Max Operating Temperature: 104 °F
- Humidity Range Operatin: 10 - 90%
- Designed For Cisco 12004, 12008, 12012, 12016, 12404, 12406, 12410, 12416
About Refurbished Products
Here, you can check more available conditions of your desired product 8FE-FX-SC-B at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
Other Available Categories For - Networking - Expansion Module
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
