The HWIC-1T Cisco 1 Port Serial WAN Interface Card is a high-performance connectivity device that enables communication between network devices over a wide area network (WAN) using serial connections. The card provides advanced configurations that allow network administrators to optimize performance and customize the card to meet specific requirements.
Here are some advanced configurations that can be applied to the HWIC-1T Cisco 1 Port Serial WAN Interface Card:
- Configuring data rates: The HWIC-1T allows administrators to configure the data rates of the serial connections. This can be done using the clock rate command.
- Configuring encapsulation: The card supports various encapsulation methods, such as HDLC, PPP, and Frame Relay. Administrators can configure the encapsulation method using the encapsulation command.
- Configuring Quality of Service (QoS): QoS enables network administrators to prioritize traffic over the network. The HWIC-1T supports QoS features such as Class-Based Weighted Fair Queuing (CBWFQ) and Low Latency Queuing (LLQ). Administrators can configure QoS using the policy-map command.
- Configuring Virtual Private Network (VPN) connectivity: The HWIC-1T supports VPN connectivity using protocols such as IPsec and Generic Routing Encapsulation (GRE). Administrators can configure VPN connectivity using the crypto isakmp and crypto map commands.
- Configuring Network Address Translation (NAT): NAT allows network administrators to translate private IP addresses to public IP addresses. The HWIC-1T supports NAT using the ip nat command.
- Configuring Access Control Lists (ACLs): ACLs enable network administrators to control network traffic by specifying which packets are allowed or denied based on criteria such as source and destination IP address, protocol type, and port numbers. The HWIC-1T supports ACLs using the access-list command.
- Configuring routing protocols: The HWIC-1T supports various routing protocols, such as Routing Information Protocol (RIP), Open Shortest Path First (OSPF), and Border Gateway Protocol (BGP). Administrators can configure routing protocols using the router command.
- Configuring loopback testing: Loopback testing allows administrators to test the serial connection without using an external device. The HWIC-1T supports loopback testing using the loopback command.
By applying these advanced configurations to the HWIC-1T Cisco 1 Port Serial WAN Interface Card, network administrators can optimize performance and customize the card to meet specific requirements. However, it is important to ensure that the configurations are compatible with the network devices and applications in use, and to follow best practices for maintaining the card.
Features and BenefitsThe HWIC-1T is a 1-port Serial WAN Interface Card (WIC) from Cisco that provides a serial connection for WAN access. It is designed for use in Cisco Integrated Services Routers (ISR) and provides a range of features and benefits that make it a popular choice for businesses and organizations.
Some of the key features and benefits of the HWIC-1T include:
- High-speed data transfer: The HWIC-1T can support data transfer rates of up to 8 Mbps, which makes it suitable for high-speed data transfer applications.
- Serial interface: The HWIC-1T provides a serial interface for WAN access, which is commonly used for leased line connections.
- Compact form factor: The HWIC-1T has a compact form factor that allows it to be installed in tight spaces and in environments with limited space.
- Compatibility with multiple protocols: The HWIC-1T supports a range of protocols, including HDLC, PPP, and Frame Relay, which makes it compatible with a wide range of network environments.
- Easy installation: The HWIC-1T is easy to install and configure, which reduces the time and effort required for deployment.
- Low power consumption: The HWIC-1T has low power consumption, which helps to reduce operating costs and environmental impact.
- Cost-effective: The HWIC-1T is a cost-effective solution for businesses and organizations that need to connect to a WAN using a serial interface.
- Flexibility: The HWIC-1T can be used in a variety of applications, including point-to-point, point-to-multipoint, and hub-and-spoke configurations.
- Improved network performance: The HWIC-1T can improve network performance by providing a high-speed connection and optimizing bandwidth utilization.
- High reliability: The HWIC-1T is designed for high reliability and provides a range of features that help to ensure uninterrupted connectivity, including automatic line speed detection, error correction, and fault detection.
The HWIC-1T Cisco 1 Ports Serial WAN Interface Card is a networking device that provides high-speed connectivity between network devices using serial interfaces. Maintenance and upgrade of this device are essential to keep it running smoothly and to ensure maximum performance. Here are some steps to follow for maintenance and upgrade of the HWIC-1T:
- Regular cleaning: Clean the HWIC-1T regularly to prevent dust and other debris from accumulating. Use a soft, dry cloth or compressed air to remove any accumulated dirt or debris from the device.
- Firmware updates: Check for firmware updates regularly and install them when available. Firmware updates may fix known bugs or add new features to the device.
- Hardware upgrades: Consider upgrading the hardware of the HWIC-1T if it does not meet the requirements of your network. For example, you may need to upgrade the RAM or CPU to handle higher traffic volumes.
- Backup configuration: Backup the configuration of the HWIC-1T regularly to prevent loss of data in case of device failure or hardware upgrades. Use the "copy running-config" command to save the configuration file to a secure location.
- Diagnostics: Run diagnostic tests on the HWIC-1T to check for any hardware or software issues. Use the "show diagnostic" command to view the results of the diagnostic tests.
- Troubleshooting: Troubleshoot any issues with the HWIC-1T using Cisco's troubleshooting guides or contacting their technical support team. Ensure to follow the standard troubleshooting procedures to isolate the root cause of the issue.
- Replacement: If the HWIC-1T is not working correctly, consider replacing it with a new device. The HWIC-1T may need to be replaced due to hardware failure or if it cannot be upgraded to meet the network requirements.
- Manufacturer: Cisco Systems, Inc
- MPN: HWIC-1T
- Product Name: 1-Port Serial WAN Interface Card
- Product Type: HWIC
- SKU: HWIC-1T
- Application/Usage: Wide Area Network
- Interfaces/Ports: 1 x Asynchronous/Synchronous Serial WAN
- Interfaces/Ports Details: 1 x Asynchronous/Synchronous Serial
Management & Protocols
- Management: SNMP
Weight & Dimension
- Height 0.8 Inch
- Width 3.1 Inch
- Depth 5.6 Inch
- Additional Information
- Synchronous maximum speed (per port): 8Mbps
- Asynchronous maximum speed (per port): 115.2 kbps
- Cisco 1841
- Cisco 2801
- Cisco 2811
- Cisco 2821
- Cisco 2851
- Cisco 3825
- Cisco 3845
About Refurbished Products
Here, you can check more available conditions of your desired product HWIC-1T at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
Other Available Categories For - Networking - Expansion Module
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPSĀ® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day SelectĀ®
Estimated delivery time: 3 business days
UPS 2nd Day AirĀ®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day AirĀ® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day AirĀ® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day AirĀ® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPSĀ® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM ā Saturday
FedEx Shipping Options:
FedEx GroundĀ®
Estimated delivery time: (4ā7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home DeliveryĀ®
Estimated delivery time: 4ā7 business days, based on the distance to the destination.
FedEx Express SaverĀ®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2DayĀ®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard OvernightĀ®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority OvernightĀ®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First OvernightĀ®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPSĀ®/FedExĀ® International Economy
Estimated delivery time: 4-7 business days
UPSĀ®/FedExĀ® International Priority
Estimated delivery time: 2-4 business days
UPSĀ®/FedExĀ® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedExĀ® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
