The WIC-1ENET Cisco Single-Port Ethernet Interface Card is compatible with a variety of Cisco router models, including:
- Cisco 1800 Series Routers (1801, 1802, 1803, 1811, 1812, 1841, 1842)
- Cisco 2800 Series Routers (2801, 2802, 2811, 2821, 2851)
- Cisco 3800 Series Routers (3825, 3845)
- Cisco 2900 Series Routers (2901, 2911, 2921, 2951)
- Cisco 3900 Series Routers (3925, 3945)
It is important to note that the WIC-1ENET is not compatible with the Cisco 800 Series Routers. Additionally, the card may not be compatible with all versions of the routers listed above, so it is important to check the specific version of the router before purchasing the WIC-1ENET.
Configuring Ethernet Interfaces using the WIC-1ENETThe WIC-1ENET Cisco Single-Port Ethernet Interface Card is a network interface card that can be installed in a Cisco router to provide an additional Ethernet port for connecting to a network. The card is designed for use in a variety of Cisco routers, including the 1800, 1900, 2800, and 3800 series.
To configure the Ethernet interface on the WIC-1ENET card, you will need to access the router's command-line interface (CLI) and enter the appropriate commands. The basic steps for configuring the interface are as follows:
- Connect the Ethernet cable from the network to the WIC-1ENET card's port.
- Access the router's CLI by connecting to it through a console or Telnet connection.
- Enter the "enable" command to enter privileged mode.
- Enter the "configure terminal" command to enter configuration mode.
- Enter the "interface" command followed by the name of the interface you want to configure (for example, "interface fastethernet 0/0").
- Enter the "ip address" command followed by the IP address and subnet mask you want to assign to the interface (for example, "ip address 192.168.1.1 255.255.255.0").
- Enter the "no shutdown" command to enable the interface.
- Enter the "end" command to exit configuration mode.
- Enter the "show ip interface brief" command to verify that the interface is up and has the correct IP address and subnet mask.
It is important to note that the commands and syntax may vary slightly depending on the specific router model and version of Cisco IOS software that is running on the router. It is also important to consult the router's documentation and the Cisco IOS command reference for more detailed information on configuring Ethernet interfaces.
Troubleshooting Connectivity Issues- Verify that the cable is properly connected to the WIC-1ENET card and the network device.
- Check that the cable is not damaged or frayed.
- Make sure that the network device is configured with the correct IP address and subnet mask.
- Check the status of the WIC-1ENET card by using the show interface command in the Cisco IOS. The status should be "up" and the line protocol should be "up".
- Check the status of the network device by using the appropriate command for that device.
- Make sure that the network device is configured with the correct duplex and speed settings.
- Check that the network device is not configured with any access control lists (ACLs) that are blocking traffic from the WIC-1ENET card.
- Check the status of the network switch or router that the WIC-1ENET card is connected to.
- Check for any error messages on the WIC-1ENET card or network device.
- If none of the above steps resolve the issue, try replacing the cable and/or the WIC-1ENET card to rule out hardware failure.
- Manufacturer Cisco Systems, Inc
- Manufacturer Part Number :WIC-1ENET
- Product Description : Cisco Expansion Module - 1 PORTS
- Device Type : Expansion Module
- Form Factor : Plug-In Module
- Ports Qty : 1 PORTS
- Data Link Protocol : Ethernet
NETWORKING
- Connectivity technology : Wired
- Data link protocol : Ethernet
EXPANSION / CONNECTIVITY
- Interfaces : 1 X Network - Ethernet - 1
- Compatible Slots : 1 X Expansion Slot
Here, you can check more available conditions of your desired product WIC-1ENET at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
Other Available Categories For - Networking - Router
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
