X2-10GB-SR Cisco X2 10GBPS Transceiver Module Refurbished

The Cisco X2-10GB-SR is a transceiver module designed to facilitate high-speed data transmission within networking environments. It operates at a speed of 10 Gigabytes Per Second (GBPS) and utilizes the 10GBase-SR standard for multi-mode fiber optic connections. This module supports data transmission up to 300 meters using 850nm wavelengths and employs a Duplex Smart Carrier (SC) connector.

Transceiver modules are essential components in networking equipment. They convert electrical signals into optical signals for transmission across fiber optic cables, allowing for high-speed data transfer. Different transceiver modules are used for various data rates and cable types to meet specific networking needs.

The X2-10GB-SR module operates at a blazingly fast speed of 10 Gigabytes per second, enabling rapid data transfer within networks.

This module adheres to the 10GBase-SR standard, specifically designed for multi-mode fiber connections, ensuring compatibility with compatible networking equipment.

It's optimized for multi-mode fiber optic cables, which are commonly used for shorter-range transmissions within networking infrastructures.

The module supports data transmission up to a distance of 300 meters, making it suitable for applications requiring shorter-range connectivity.

Utilizing 850nm wavelengths, this module emits light at a specific frequency that enables efficient data transmission through multi-mode fiber optics.

The SC connector facilitates a secure and reliable connection between the transceiver module and the fiber optic cable, ensuring efficient data transfer.

High-speed transceiver modules like the Cisco X2-10GB-SR offer several advantages in networking environments:

Modules operating at 10 Gigabytes per second significantly increase network bandwidth, allowing for faster data transfer and reduced latency.

With faster data transmission rates, networks can accommodate increasing data demands and remain relevant as technology advances.

High-speed modules ensure efficient and reliable data transfer, leading to improved network performance for various applications.

Rapid Data Transfer

Operating at 10 Gigabytes per second, this module facilitates rapid data transfer, ideal for high-bandwidth applications and large data transfers.

Multi-Mode Fiber Compatibility

Designed for multi-mode fiber, it suits environments where shorter-range, high-speed connections are required within networking infrastructures.

Flexible Connectivity

The module's Duplex Smart Carrier (SC) connector ensures a secure and reliable connection, enabling seamless integration into networking setups.

In data center environments handling large volumes of data, these modules facilitate high-speed connectivity between servers, switches, and storage systems.

Campus Networks

Within educational institutions or corporate campuses, these modules support high-speed connections between network switches for efficient data transfer.

Telecommunication Networks

Telecommunication companies can use these modules to ensure high-speed connections between networking equipment, facilitating reliable communication services.

The Cisco X2-10GB-SR transceiver module is a high-speed networking component that is designed for use with Cisco networking equipment. It is based on the X2 form factor and is designed for use with Cisco equipment that supports the X2 interface. Some of the key features and benefits of This model module include:

• High-speed connectivity: This module uses 10 Gigabit Ethernet technology to provide data transfer speeds of up to 10 Gbps over short distances of up to 300 meters. This makes it well-suited for use in applications where fast data transfer is required.
• Reliability: The module has been designed to meet stringent industry standards for performance and reliability, and has been tested extensively to ensure that it is capable of operating under a wide range of conditions. Additionally, the module has been designed with error correction technology to help ensure that data is transmitted accurately and reliably.
• Compatibility: This Product module is compatible with a wide range of Cisco networking equipment, including switches, routers, and other networking devices. This makes it easy to integrate into existing networking infrastructure.
• Ease of use: The module is easy to install and use, with no special configuration required. It is plug-and-play, meaning that it can be quickly and easily installed into the appropriate port on a Cisco networking device.

• Access Control: Access control is used to restrict access to network resources. It can be implemented using various methods such as password protection, biometric authentication, and digital certificates.
• Virtual Private Network (VPN): VPNs use encryption to provide secure communication between remote users and the network. It can be used to encrypt data in transit and authenticate users before granting them access to the network.
• Firewall Protection: Firewalls are used to filter incoming and outgoing traffic based on predefined rules. They can be set up to block traffic based on specific criteria such as IP address, protocol type, and port number.
• Intrusion Detection and Prevention Systems (IDS/IPS): IDS/IPS systems monitor network traffic for suspicious activity and can take action to block or mitigate attacks. They can be set up to detect and prevent a wide range of attacks such as viruses, worms, and denial-of-service (DoS) attacks.
• Network Segmentation: Network segmentation is the practice of dividing a network into smaller, more manageable subnetworks. This can help to limit the impact of a security breach by containing it to a smaller portion of the network.

The Cisco X2-10GB-SR transceiver module is a 10 Gigabit Ethernet hot-swappable input/output device that plugs into a switch's 10 Gigabit Ethernet slot. It uses a fiber optic cable to transmit data and has a maximum transmission distance of 300 meters.

The X2-10GB-SR transceiver module uses a type of fiber optic cable known as multimode fiber, which allows multiple modes or paths for the light to travel through the cable. This allows for higher bandwidth and faster data transmission speeds over shorter distances.

The connector type used by the X2-10GB-SR transceiver module is the LC connector, which is a small form factor connector that uses a push-pull mechanism for easy insertion and removal. LC connectors are widely used in fiber optic networks and are known for their reliability and high performance.

• Manufacturer: Cisco
• Model Number or SKU# X2-10GB-SR
• Product Line: System X
• Product Type: Transceiver Module

• Application/Usage: Data Networking
• Data Transfer Rate:10 GBPS
• Form Factor Plug-in module
• Connectivity Technology Wired
• Cabling Type10GBase-SR
• Data Link Protocol10 GigE
• Optical Wave Length850 nm
• Max Transfer, Distance984 ft

• Interfaces/Ports: 1 x 10GBase-SR
• Interfaces/Ports Details: 1 x SC/PC Duplex 10GBase-SR
• Network Ports: SFP
• Number of Ports: 2
• Number of Modules: 1
• Connector: SC duplex

• Media Type Supported Optical Fiber
• Fiber Optic Cable Standard: 50 µm, 62.5 µm
• Fiber Mode Supported: Multi-mode
• Ethernet Technology: 10 Gigabit Ethernet
• Network Technology: 10GBase-SR

• Transmit Power (dBm):
• Maximum: -1.0
• Minimum: -7.3
• Receive Power (dBm):
• Maximum: -1.0
• Minimum: -9.9
• Power Consumption: 4 Watt
• Power Supply :+3.3V, APS(+1.2V)

• Min Operating Temperature: 32 °F
• Max Operating Temperature: 104 °F

Features

• Support of IEEE 802.3ae 10GBASE-SR at 10.3125Gbps
• Transmission Distance up to 300m (MMF)
• Vertical Cavity Surface Emitting Laser at 850nm
• Hot Pluggable 70-PIN Connector with XAUI Electrical Interface
• Management and control via MDIO 2-wire interface
• Diagnostic Optics Monitoring
• RoHS Compatible

Applications

• 10GE Ethernet switches and routers
• 10GE Core-routers
• 10GE Storage
• Other 10Gbps Ethernet Transmission System

Compatibility

Cisco switches that support 10 Gigabit Ethernet connectivity:

• Cisco 2360 Series – 2360-48TD-S
• Cisco 3100 Series WS–CBS3110X-S-I
• Cisco 3100 Series WS–CBS3120X-S
• Cisco 3100 Series WS–CBS3130X-S
• Cisco 4500 Series WS–X4013+10GE
• Cisco 4500 Series WS–X4516-10GE
• Cisco 4500 Series WS–X45-SUP6-E
• Cisco 4500 Series WS–X45-SUP6L-E
• Cisco 4500 Series WS–X4606-X2-E
• Cisco 4900 ME-4924-10GE
• Cisco 4900 Series WS–C4928-10GE
• Cisco 4900 Series WS–C4948-10GE
• Cisco 6500 Series VS–S720-10G-3C
• Cisco 6500 Series VS–S720-10G-3CXL
• Cisco 6500 Series WS–X6708-10G-3C
• Cisco 6500 Series WS–X6708-10G-3CXL
• Cisco 6500 Series WS–X6716-10G-3C
• Cisco 6500 Series WS–X6716-10G-3CXL
• Cisco 7600 RSP720-10GE
• Cisco Nexus 7000 N7K-M108X2-12L
• Cisco WS–C3560E-12D
• Cisco WS–C3560E-12SD
• Cisco WS–C3560E-24PD
• Cisco WS–C3560E-24TD
• Cisco WS–C3560E-48PD
• Cisco WS–C3560E-48PDF
• Cisco WS–C3560E-48TD
• Cisco WS–C3750E-24PD
• Cisco WS–C3750E-24TD
• Cisco WS–C3750E-48PD
• Cisco WS–C3750E-48PDF
• Cisco WS–C3750E-48TD
• Cisco WS–C4900M

Cisco line cards that support 10 Gigabit Ethernet connectivity:

• Cisco 4500 Series WS–X4013+10GE
• Cisco 4500 Series WS–X4516-10GE
• Cisco 4500 Series WS–X4606-X2-E
• Cisco 6500 Series VS–S720-10G-3C
• Cisco 6500 Series VS–S720-10G-3CXL
• Cisco 6500 Series WS–X6708-10G-3C
• Cisco 6500 Series WS–X6708-10G-3CXL
• Cisco 6500 Series WS–X6716-10G-3C
• Cisco 6500 Series WS–X6716-10G-3CXL
• Cisco 7600 RSP720-10GE
• Cisco Nexus 7000 N7K-M108X2-12L
• Cisco RFGW-X4516-10GE
• Cisco WS–X4904-10GE
• Cisco WS–X4908-10GE

In summary, the Cisco X2-10GB-SR 10GBase-SR Multi-Mode Fiber X2 Transceiver Module is a powerful component for high-speed data transmission in networking environments. Its support for 10 Gigabytes per second, compatibility with multi-mode fiber, 300-meter transmission range, 850nm wavelength, and Duplex Smart Carrier (SC) connector make it an essential solution for rapid and reliable data transfer within networks. Whether in data centers, campuses, or telecommunication networks, this module offers efficient connectivity for various networking applications.