General Information GLC-LH-SMD Cisco 1000BASE-LX/LH SFP Transceiver Module
Manufacturer Cisco Systems, IncMPN: GLC-LH-SMD
Manufacturer Website Address http://www.cisco.com
Product Model GLC-LH-SMD
Product Name SFP (mini-GBIC) Module
Product Type SFP (mini-GBIC)
SKU: GLC-LH-SMD
Technical Information
Application/Usage Data Networking
Application/Usage Optical Network
Interfaces/Ports
Interfaces/Ports 1 x 1000Base-LX/LH
Interfaces/Ports Details 1 x LC/PC Duplex 1000Base-LX/LH Network
Performance
Connectivity Media 62.5 µm, 50 µm Optical Fiber 1000Base-LX/LH
Data Transfer Rate 1 Gbps Gigabit Ethernet
Dimension and Weight
Form Factor Hot-swappable
Height 0.3 lnch
Width 0.5 lnch
Depth 2.2 lnch
Weight 2.65 oz
Miscellaneous
Compatibility -
Multisource Agreement Compliant
Catalyst Express 500
Catalyst Express 520
Cisco ME 3400
Cisco ME 4900 Series
Cisco ME 6500 Series
Catalyst 2940 Series
Catalyst 2950 Series
Catalyst 2960 series
Catalyst 2960-S Series
Catalyst 2970 Series
Catalyst 3560 Series
Catalyst 3560-E Series
Catalyst 3560-X Series
Catalyst 3750 Series
Catalyst 3750-E Series
Catalyst 3750-X Series
Cisco IE3010 Series
Catalyst 4500 Series
Catalyst 4900 Series
Catalyst 6500 Series
Cisco Catalyst 2360 Series
Cisco Catalyst 3000 Series
Catalyst 3100 Blade Switches
Cisco Nexus 7000 Series
Cisco 7200 Series Router
Cisco uBR7200 Series
Cisco 7300 Series Router
Cisco 7600 Series Router
Cisco uBR10000 Series Router
Shared Port Adapters (SPAs)
Cisco MWR 2941 Mobile Wireless Routers
About New Bulk Pack Products
Building a fiber-optic network calls for a lot of planning and consideration of many factors. Transceivers are part of the many devices used to build optical fiber systems. A transceiver serves the combined roles of a transmitter and a receiver in that it transmits and receives signals. They are most common in communication equipment such as cellular phones, cordless telephone sets, and radio. Small form factors are required as networks become dense and space is limited, which sees transceivers included in chipsets.
In local area networks (LAN), a transceiver is used to connect a computer to printers and other devices on the network. Usually, the transceiver is integrated into the Network Interface Card (NIC)
Typical Roles of a Transceiver
- Used to convert frequencies from IF to RF.
- Widespread use in wireless communication to transmit data – voice, data, and video.
- RF transceivers are used in communication devices to support radio and TV signal transmission, digital signals transmission, and satellite communication.
- Collision detection – detection of simultaneous signals on the network.
- Transceivers can be deployed to provide a jabber function to interrupt transmission of long data stream outputs.
Look no further for all types of transceivers including fiber optic transceivers, wireless transceivers, Ethernet transceivers, and RF transceivers. All these transceivers have different characteristics and support full-duplex communication, but the principle behind their work remains the same. Different types of transceivers will have varying numbers of ports used in transceiver networking connections.
RF Transceivers: these devices are used to transmit video or voice data over a wireless medium. Commonly used for satellite communication, radio transmission, and ITE/WiMax/WLAN networks. The radio transceiver works by silencing the receiver when it is transmitting. There is an electronic switch that facilitates the connection of both the receiver and transmitter on the same antenna. The switch protects the receiver from damage that may be caused by the transmitter output.
Fiber Optic Transceivers: Also referred to as optical modules or fiber optical transceivers. Used to transmit data in fiber optic technology. The network must also have electronic components to encode or decode data into light signals.
Ethernet Transceivers: Basically used to connect electronic devices in a network so that they are able to transmit and receive data. It is also referred to as a media access unit (MAU). The best application of these transceivers is in the specification of IEEE 802.3 and Ethernet. Ethernet transceivers will detect a collision, provide Ethernet interface processing, convert digital data, and provide access to the network.
Wireless Transceivers: Wireless transceivers are a fundamental component necessary for data delivery in wireless networks. These transceivers have two layers. The physical layer has a baseband processor and RF front end. The processor converts a bitstream to a collection symbol flow for data transmission. The second layer is a MAC layer for link traffic control in contacting wireless links, improving data throughput, and preventing collisions.
We guarantee our customers high quality and reliability for all our transceiver networking solutions, irrespective of the type and size of your network.
