AIR-CAP3501E-E-K9 Cisco Aironet 3501E 300MBPS Wireless New

Firmware and software updates are important for the performance and security of any networking device, including the Cisco Aironet 3501E Wireless Access Point (AIR-CAP3501E-E-K9). Here's an explanation of the firmware and software updates process for this access point:

• Check for Updates: The first step in updating the firmware or software of the access point is to check for updates on the Cisco website. Cisco periodically releases updates to improve the performance and address security vulnerabilities of their devices.
• Download the Update: Once an update is available, it can be downloaded from the Cisco website. It's important to ensure that the correct update is downloaded for the specific model and version of the access point.
• Backup Configuration: Before installing any update, it's recommended to backup the configuration of the access point to prevent any data loss or configuration errors during the update process.
• Install the Update: The update can then be installed on the access point. This typically involves uploading the update to the access point and following the installation instructions provided by Cisco. This process may take several minutes to complete.
• Verify the Update: Once the update is installed, it's important to verify that it was successful and that the access point is operating normally. This can be done by checking the access point logs or running diagnostic tests.
• Restore Configuration: If everything is working properly, the backup configuration can be restored to the access point to ensure that the same settings and configurations are in place.

If you are experiencing issues with the Cisco Aironet 3501E Wireless Access Point (AIR-CAP3501E-E-K9), here are some troubleshooting tips to help you identify and resolve the problem:

• Check Power and Connectivity: Verify that the access point is receiving power and is properly connected to the network. Check the Ethernet cable and ensure it is securely plugged in to the access point and the network switch or router.
• Check Configuration Settings: Verify that the access point is configured correctly. Check the wireless network settings, such as the SSID and security settings, and ensure they are consistent with the settings on client devices. Check the management interface for any configuration errors or issues.
• Check for Interference: Wireless interference from other devices or nearby networks can affect the signal strength and quality. Use a wireless spectrum analyzer to identify any potential sources of interference, and adjust the access point's channel settings to avoid overlapping with other networks.
• Check for Firmware Updates: Check for any available firmware updates for the access point and ensure that it is running the latest version. Firmware updates can provide bug fixes and feature improvements that can resolve issues with the access point.
• Check for Physical Obstructions: Physical obstructions, such as walls or large objects, can affect the wireless signal. Adjust the access point's location or use additional access points to provide coverage in areas with poor signal quality.
• Reset the Access Point: If all other troubleshooting steps have been exhausted, try resetting the access point to its default settings. This can help to clear any configuration or firmware issues that may be causing the problem.

The Cisco Aironet 3501E Wireless Access Point (AIR-CAP3501E-E-K9) can be managed and monitored using various tools and methods to ensure its smooth operation and optimal performance. Here are some ways to manage and monitor this access point:

• Command Line Interface (CLI): The CLI allows administrators to access and manage the access point using a text-based interface. This method provides granular control over the access point's configuration and can be useful for troubleshooting issues.
• Graphical User Interface (GUI): The GUI provides a web-based interface for managing and monitoring the access point. This method is user-friendly and can be accessed from any device with a web browser.
• SNMP: Simple Network Management Protocol (SNMP) is a widely-used protocol for monitoring and managing network devices. The access point can be configured to send SNMP traps to a network management system (NMS) for monitoring and troubleshooting.
• Cisco Prime Infrastructure: Cisco Prime Infrastructure is a network management tool that can be used to manage and monitor Cisco network devices, including the Cisco Aironet 3501E Wireless Access Point. This tool provides a single dashboard for managing and monitoring the entire network.
• Syslog: The access point can be configured to send system log messages to a syslog server for analysis and troubleshooting.
• Cisco Wireless Control System (WCS): Cisco WCS is a network management tool that can be used to manage and monitor Cisco wireless networks. This tool provides granular control over the access point's configuration and can be used to monitor the network for issues.

Detail Description

• Manufacturer: Cisco Systems, Inc
• Category Name: Networking
• Sub Category Name: Wireless 300MBPS
• Manufacturer Part Number: AIR-CAP3501E-E-K9
• Brand Name: Cisco
• Device Type - Wireless access point
• Form Factor - External
• Connectivity Technology - Wireless
• Data Transfer Rate - 300 Mbps
• Line Coding Format - CCK
• Data Link Protocol - IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
• Spread Spectrum Method - OFDM
• Frequency Band - 2.4 GHz
• Status Indicators - Status

Features

• Auto-sensing per device, power over Ethernet (PoE), MIMO technology, Wi-Fi Multimedia (WMM) support, CleanAir technology, Cisco M-Drive technology
• Encryption Algorithm - AES, TLS, PEAP, TTLS, TKIP
• Authentication Method - MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST
• Compliant Standards - IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n

Expansion / Connectivity

• Interfaces - 1 x 1000Base-T - RJ-45 ¦ 1 x management - RJ-45 ¦ 6 x

Processor / Memory / Storage

• RAM - 128 MB
• Flash Memory - 32 MB

Power

• Power Over Ethernet (PoE) Supported - PoE
• Power Device - External power adapter
• Voltage Required - AC 120/230 V ( 50/60 Hz )

Please contact us over the phone or ask for live chat/help if you have any questions about the estimated time of arrival for any "lead time required" item.