Installation and configuration of the HPE 10GBE Ethernet Pass-Thru Module for C-Class Bladesystem is a critical step in setting up a high-performance networking infrastructure for your data center. This module is designed to provide a direct and non-blocking 10 Gigabit Ethernet connectivity between server blades and upstream switches, resulting in increased throughput, lower latency, and reduced power consumption.
To install and configure the 10GBE Ethernet Pass-Thru Module, follow these steps:
- Physical Installation: Before installing the module, ensure that the chassis is powered off and disconnected from the power source. Open the chassis and locate the available slots for installing the Pass-Thru Module. Carefully remove the module from its packaging, align it with the slot, and gently slide it into place. Secure the module using the screws provided.
- Connect the Cables: Once the module is securely installed, connect the Ethernet cables to the corresponding ports on the module. The Pass-Thru Module has 16 external 10GBASE-T Ethernet ports that support both RJ45 and SFP+ connectors, as well as four internal stacking ports for connecting to other Pass-Thru Modules.
- Configure the Pass-Thru Module: After the physical installation and cable connection, it's time to configure the Pass-Thru Module. HPE provides a web-based graphical user interface (GUI) and a command-line interface (CLI) for managing the module's settings. The GUI allows for an intuitive and user-friendly configuration of the Pass-Thru Module, while the CLI provides a more granular and detailed control over the settings.
- Assign IP addresses to ports: To allow for management and monitoring of the module, you must assign IP addresses to the ports. This can be done through the GUI or CLI, and you should ensure that each port has a unique IP address. You can also configure VLANs and QoS settings to optimize traffic flow and prioritize critical applications.
- Configure Uplink Ports: Once the IP addresses have been assigned, you can configure the uplink ports that connect to the upstream switches. You can choose from various modes of operation, such as LACP, static port-channel, or single port. You can also configure link aggregation groups (LAGs) and trunking protocols to provide redundancy and load balancing.
- Verify and Test the Configuration: After the Pass-Thru Module is configured, it's essential to verify and test the settings to ensure that everything is working as expected. You can use various tools such as ping, traceroute, and network performance testing tools to measure latency, throughput, and packet loss.
Managing and monitoring the HPE 10GBE Ethernet Pass-Thru Module for C-Class Bladesystem is essential to ensure optimal performance, reliability, and security of your data center network infrastructure. The module provides a wide range of management and monitoring features that allow you to monitor the health and performance of the module, troubleshoot issues, and configure advanced settings.
Here are some of the management and monitoring features of the HPE 10GBE Ethernet Pass-Thru Module:
- Web-based Graphical User Interface (GUI): The Pass-Thru Module includes a web-based GUI that provides an intuitive and user-friendly interface for managing and monitoring the module. You can access the GUI from any web browser and use it to view and configure various settings such as port configurations, VLANs, QoS, and link aggregation.
- Command-line Interface (CLI): The Pass-Thru Module also supports a command-line interface (CLI) that allows you to configure advanced settings and perform advanced troubleshooting tasks. The CLI provides a more granular and detailed control over the settings compared to the GUI.
- SNMP Support: The Pass-Thru Module supports Simple Network Management Protocol (SNMP), which allows you to monitor the module's performance and health using SNMP-based management tools such as HPE Intelligent Management Center (IMC) or third-party tools. SNMP provides a standardized way of monitoring network devices and collecting performance data.
- Port Mirroring: The Pass-Thru Module supports port mirroring, which allows you to replicate traffic from one or more ports to a monitoring port. Port mirroring is useful for troubleshooting network issues and analyzing network traffic.
- Remote Monitoring (RMON): The Pass-Thru Module supports Remote Monitoring (RMON), which provides advanced monitoring capabilities such as packet capture, packet analysis, and traffic statistics. RMON allows you to monitor the module's performance and diagnose issues in real-time.
- Syslog Support: The Pass-Thru Module supports Syslog, which allows you to send system logs to a centralized logging server for analysis and troubleshooting. Syslog is useful for identifying and troubleshooting issues that may not be immediately apparent from the GUI or CLI.
- Firmware Updates: The Pass-Thru Module allows you to update the firmware of the module to ensure that it is up-to-date and free of security vulnerabilities. Firmware updates can be performed through the GUI or CLI.
Ensuring the reliability and security of the HPE 10GBE Ethernet Pass-Thru Module for C-Class Bladesystem is crucial for maintaining the integrity and availability of your data center network infrastructure. The module provides a range of features and best practices that help you maintain the reliability and security of the network.
Here are some best practices and features to ensure the reliability and security of the HPE 10GBE Ethernet Pass-Thru Module:
- Redundancy: Redundancy is crucial for ensuring the reliability of the network. The HPE 10GBE Ethernet Pass-Thru Module provides several redundancy features, including redundant power supplies, port-channeling, and failover capabilities. You can use these features to ensure that the network remains operational in the event of a hardware or software failure.
- Access Control: Access control is critical for ensuring the security of the network. The Pass-Thru Module supports various access control features such as port-level security, 802.1x authentication, and Role-Based Access Control (RBAC). These features allow you to control who has access to the network and ensure that only authorized users can access sensitive information.
- Encryption: Encryption is essential for securing data in transit. The Pass-Thru Module supports various encryption technologies, including IPsec and SSL/TLS. You can use these technologies to encrypt traffic between the module and other devices on the network, ensuring that sensitive data remains secure.
- Firewall: The Pass-Thru Module supports a built-in firewall that allows you to control network traffic between different VLANs or networks. The firewall provides an additional layer of security to protect the network from unauthorized access and attacks.
- VLANs: VLANs are essential for segmenting the network and providing additional security. The Pass-Thru Module supports up to 4096 VLANs, allowing you to segment the network and control access to different parts of the network.
- Quality of Service (QoS): QoS is critical for ensuring that critical applications and services receive the necessary network resources. The Pass-Thru Module supports QoS features such as traffic shaping and priority queuing, allowing you to prioritize network traffic and ensure that critical applications receive the necessary resources.
- Regular Maintenance: Regular maintenance is crucial for ensuring the reliability and security of the network. You should perform regular firmware updates, backups, and system checks to ensure that the module is up-to-date and free of issues.
Detail Description
- Manufacturer: HPE
- Manufacturer Part Number: 504624-001
- Type: Networking
- Sub-Type: Expansion Module 10 Gigabit
- Device Type : Expansion Module
- Form Factor : Plug-In Module
Networking
- Auxiliary Ports : 16 X Sfp+
- Features : Auto-Negotiation
Expansion / Connectivity
- Expansion Slots Total (Free) : 16 ( 16 ) X Sfp+
- Interfaces : 1 X Management - Rs-232
- Compatible Slots : 1 X Expansion Slot
About New Bulk Pack Products
Here, you can check more available conditions of your desired product 504624-001 at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.
Other Available Conditions for this Part
Other Available Categories For - Networking - Expansion Module
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
