NCS2K-MF-DEG-5-CV Cisco Expansion Module Factory Sealed New

The NCS2K-MF-DEG-5-CV Cisco Expansion Module is designed to enhance the performance and throughput of Cisco's Network Convergence System (NCS) 2000 Series. The module includes several features that contribute to increased network performance and higher throughput, including:

• High Capacity: The NCS2K-MF-DEG-5-CV module supports up to 5 degrees, with each degree supporting up to 10 Tb/s of capacity. This means that the module can provide up to 50 Tb/s of total capacity when fully utilized.
• Coherent Optical Technology: The module supports coherent optical technology, which enables high-speed transmission over long distances with minimal signal degradation. This technology helps to ensure that data is transmitted reliably and efficiently across the network.
• Flexible Configurations: The NCS2K-MF-DEG-5-CV module supports flexible configurations, including a mix of line and service interfaces. This allows operators to tailor the module to their specific needs and optimize performance.
• Scalability: The NCS2K-MF-DEG-5-CV module is highly scalable, allowing operators to add additional capacity as needed to support increasing demand. This scalability helps to ensure that the network can keep up with changing usage patterns and evolving technologies.
• High Availability: The module supports various high availability features, including redundant power supplies and hot-swappable components. These features help to ensure that the network remains operational even in the event of a component failure.
• Enhanced Network Visibility: The NCS2K-MF-DEG-5-CV module provides enhanced network visibility through features such as telemetry and analytics. This allows operators to monitor network performance in real-time and identify potential issues before they become critical.
• Low Latency: The NCS2K-MF-DEG-5-CV module has low latency, which is critical for real-time applications such as voice and video. Low latency helps to ensure that these applications are delivered with minimal delay and high quality.

The NCS2K-MF-DEG-5-CV Cisco Expansion Module is a multi-function card designed for use with the Cisco Network Convergence System 2000 series (NCS2K) optical transport platform. The module requires specific power and cooling requirements to ensure optimal performance and reliability.

• Power Requirements: The NCS2K-MF-DEG-5-CV module requires dual DC power inputs for redundancy, each of which must be capable of delivering -48V DC power. The module also supports AC power inputs with an input range of 85-264V AC. The power supplies must be hot-swappable to ensure continuous operation in the event of a power supply failure.
• Cooling Requirements: The NCS2K-MF-DEG-5-CV module is designed to operate in an environment with adequate cooling. The module generates heat, and it is important to ensure that the ambient temperature is within the acceptable range for the module's operation. The NCS2K chassis must have sufficient airflow to ensure that the module stays within its temperature limits.
• Power Consumption: The NCS2K-MF-DEG-5-CV module's power consumption varies depending on the specific use case and configuration. The actual power consumption may vary depending on the type and number of ports in use and the amount of traffic passing through them.
• Power Management: The NCS2K-MF-DEG-5-CV module supports various power management features such as power capping and power-saving mode. Power capping allows administrators to set a maximum power limit for the module, while power-saving mode reduces power consumption by shutting down unused ports.
• Temperature Monitoring: The NCS2K-MF-DEG-5-CV module is equipped with temperature sensors to monitor its operating temperature. The NCS2K chassis includes a temperature control system that regulates the airflow to maintain an optimal temperature range.

The NCS2K-MF-DEG-5-CV Cisco Expansion Module is a 5-degree colorless directionless and contentionless reconfigurable optical add-drop multiplexer (ROADM) that is designed for use in the Cisco Network Convergence System 2000 (NCS2K) platform. Despite being a high-quality and reliable module, there are some common issues that users may encounter during its operation. Here are some of the most common issues and their troubleshooting steps:

• Module not detected: If the NCS2K-MF-DEG-5-CV expansion module is not detected by the NCS2K platform, it may be due to a connectivity issue. Ensure that the module is properly installed and securely connected to the platform. If the issue persists, check the compatibility of the module with the platform.
• Loss of signal: Loss of signal can occur due to various reasons, such as incorrect fiber connections or faulty cables. Verify that the fiber connections are correct and secure. If the issue persists, check the cable quality or replace the cable.
• Signal quality issues: Signal quality issues such as noise, distortion, or attenuation can be caused by several factors such as incorrect configurations, fiber or cable issues, or problems with the platform. Check the configuration settings and verify that the settings are optimal for the intended use. Check the fiber and cable quality and replace if necessary. If the issue persists, perform a diagnostic test on the platform to identify the problem.
• Power issues: The NCS2K-MF-DEG-5-CV expansion module requires specific power and cooling requirements to function correctly. Verify that the power supply meets the required specifications and that the module is receiving sufficient power. Check the temperature and cooling system to ensure that the temperature is within the acceptable range.
• Compatibility issues: Compatibility issues may arise due to the use of incompatible software or hardware. Ensure that the NCS2K-MF-DEG-5-CV expansion module is compatible with the NCS2K platform and the software version installed on the platform.
• Firmware or software issues: Firmware or software issues may cause the module to malfunction or not function at all. Ensure that the module's firmware and software are up to date and compatible with the platform.

• Manufacturer: Cisco Systems, Inc
  
• Manufacturer Part Number: NCS2K-MF-DEG-5-CV
• Brand Name: Cisco
• Product Name: 5 Degrees Mesh Interconnect - w/Connection Verification
• Product Type: Expansion Module

Please contact us over the phone or ask for live chat/help if you have any questions about the estimated time of arrival for any "lead time required" item.