Description
Technology and Performance
The 400-BFSE Dell 1.92TB Mix Use TLC SAS 12GBPS 2.5inch Hot Plug Solid State Drive is a high-performance storage solution designed for use in enterprise-class Dell PowerEdge servers. The drive uses advanced technologies and features to provide fast, reliable, and secure data storage.
One of the key technologies used in the 400-BFSE Dell SSD is TLC (Triple-Level Cell) NAND flash memory. This type of NAND flash memory provides higher storage densities and lower costs compared to other types of NAND flash memory, but typically has lower endurance and write speeds. However, the 400-BFSE Dell SSD uses advanced wear-leveling algorithms and error correction codes to improve endurance and reliability.
The 400-BFSE Dell SSD uses a SAS (Serial Attached SCSI) interface, which provides high data transfer rates and supports hot swapping. The SAS interface is backward compatible with SATA (Serial ATA) interfaces, allowing the drive to be used in systems that support either SAS or SATA.
In terms of performance, the 400-BFSE Dell SSD provides impressive read and write speeds, with sequential read speeds of up to 2,100 MB/s and sequential write speeds of up to 1,200 MB/s. The drive also provides high random read and write IOPS (Input/Output Operations Per Second), with random read IOPS of up to 200,000 and random write IOPS of up to 10,000.
The 400-BFSE Dell SSD also includes advanced features such as power loss protection and end-to-end data protection, which help ensure the integrity and security of data stored on the drive. These features protect against data loss in the event of unexpected power outages or other disruptions.
Installation and Maintenance
The installation and maintenance of the 400-BFSE Dell 1.92TB Mix Use TLC SAS 12GBPS 2.5inch Hot Plug Solid State Drive is a relatively simple process, but it does require some knowledge of server hardware and software. Here is a general overview of the steps involved in installing and maintaining the drive:
Installation:
- Ensure that the server is powered off and unplugged.
- Open the server chassis and locate an available drive bay that is compatible with the 400-BFSE Dell SSD.
- Carefully remove any existing drive from the drive bay, if necessary.
- Insert the 400-BFSE Dell SSD into the drive bay and secure it in place using the appropriate screws or brackets.
- Connect the SAS cable to the drive and the appropriate connector on the server’s motherboard.
- Close the server chassis and power on the server.
- Install the necessary drivers and software for the drive, if required.
Maintenance:
- Regularly monitor the health and performance of the 400-BFSE Dell SSD using software provided by Dell or a third-party vendor.
- Check for firmware updates for the drive and install them as necessary.
- Perform regular backups of the data stored on the drive to prevent data loss in the event of a drive failure.
- Replace the drive if it begins to exhibit signs of failure, such as errors, slow performance, or unusual noises.
It is important to follow proper installation and maintenance procedures to ensure the reliability and performance of the 400-BFSE Dell 1.92TB Mix Use TLC SAS 12GBPS 2.5inch Hot Plug Solid State Drive. If you are not familiar with server hardware and software, it may be best to consult a professional technician or Dell support for assistance.
Data Security
The 400-BFSE Dell 1.92TB Mix Use TLC SAS 12GBPS 2.5inch Hot Plug Solid State Drive offers several features that contribute to its data security:
- Self-Encrypting Drive (SED): The 400-BFSE Dell SSD has built-in hardware encryption capabilities that can protect data at rest on the drive. This means that data is automatically encrypted and decrypted without the need for additional software or hardware, reducing the risk of data breaches.
- Trusted Computing Group (TCG) Opal 2.0: The 400-BFSE Dell SSD also supports TCG Opal 2.0, a security standard that provides additional security features such as pre-boot authentication, drive locking, and remote management.
- Secure Erase: The 400-BFSE Dell SSD includes a secure erase feature that allows the drive to be securely wiped clean of all data before being decommissioned or repurposed, preventing unauthorized access to sensitive data.
- Advanced ECC Technology: The drive uses Advanced Error Correction Code (ECC) technology, which detects and corrects errors that may occur during data transmission or storage, ensuring data integrity and preventing data loss.
- SAS Interface: The SAS interface used by the 400-BFSE Dell SSD provides additional security features, such as end-to-end data integrity checking and dual-porting, which ensure that data is transferred securely and reliably between the drive and the host system.
Main Specifications
- Manufacturer: Dell
- Part Number or SKU# 400-BFSE
- Product Type: Solid State Drive
- Capacity: 1.92TB
Technical Information
- Form Factor : 2.5inch
- Interface Type : SAS
- Lnterface Speed : 12GBPS
- Mixed Use Endurance
- Data Security & Data Encryption Options : SED
Performance
- Interfaces : 1 X SAS 12 Gb/s
- Compatible Bays : 1 X Hot-plug – 2.5inch
Product Dimensions & Weight
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
Compatibility
- Poweredge R350
- Poweredge R440
- Poweredge R450
- Poweredge R550
- Poweredge R640
- Poweredge R650
- Poweredge R650xs
- Poweredge R740xd
- Poweredge R750
- Poweredge R750xa
- Poweredge R750xs
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
