Description
Configuration and Setup
The 400-BLQU Dell 1.92TB SAS 12Gbps Read Intensive TLC 2.5inch Hot Plug Solid State Drive can be configured and set up in a server or storage system that supports SAS drives. Here are the basic steps to configure and set up the drive:
- Check server compatibility: Before purchasing the drive, make sure your server or storage system is compatible with SAS 12Gbps drives.
- Install the drive: Follow the manufacturer’s instructions to install the drive in the appropriate drive bay. Be sure to properly seat the drive connector and secure the drive in place with the appropriate screws.
- Connect the SAS cable: Connect the SAS cable from the drive to the appropriate SAS controller or HBA (Host Bus Adapter) on the motherboard or PCIe card. Be sure to follow the manufacturer’s instructions for proper cable routing and connection.
- Configure the drive: Depending on the system, you may need to configure the drive settings, such as RAID configuration or firmware updates. Follow the manufacturer’s instructions for the specific system and drive.
- Format the drive: Once the drive is connected and configured, you will need to format it with the appropriate file system, such as NTFS or ext4, depending on the operating system being used.
- Verify operation: Test the drive to ensure it is functioning properly and appears in the operating system.
Hot-plugging can be performed once the drive is installed and configured, and the system is properly set up for hot-plugging. It’s important to follow the manufacturer’s instructions and guidelines for hot-plugging to avoid damage to the system or the drive.
Hot-Plug Capability
The 400-BLQU Dell 1.92TB SAS 12Gbps Read Intensive TLC 2.5inch Hot Plug Solid State Drive has a hot-plug capability, meaning it can be added or removed from a system while the system is still running without requiring a system shutdown or reboot.
Hot-plugging is a useful feature for servers and other mission-critical systems that require high availability and uptime. With hot-plug capability, a failed or degraded drive can be replaced without interrupting the operation of the system. This allows for faster repair times and reduces the risk of data loss or system downtime.
It’s important to note that hot-plugging requires support from the server or storage system and the appropriate hardware and software configuration. Before attempting to hot-plug a drive, make sure to consult the manufacturer’s documentation and follow proper procedures to avoid damage to the system or the drive.
Maintenance and Troubleshooting
To maintain and troubleshoot the 400-BLQU Dell 1.92TB SAS 12GBPS Read Intensive TLC 2.5inch Hot Plug Solid State Drive, you can follow these steps:
Maintenance:
- Regularly update the firmware and drivers of the drive to ensure optimal performance and compatibility with the system.
- Clean the drive with compressed air or a soft, dry cloth to remove dust and debris that can interfere with the drive’s operation.
- Check the SMART (Self-Monitoring, Analysis, and Reporting Technology) status of the drive regularly using diagnostic tools provided by Dell or third-party software to detect any potential issues with the drive.
Troubleshooting:
- Check the drive connections to ensure that they are properly connected and seated in the system.
- Check the system logs and diagnostic tools provided by Dell to identify any error messages related to the drive.
- If the drive is not recognized by the system, check the BIOS settings to ensure that the drive is enabled and detected.
- If the drive is experiencing performance issues, check for any firmware or driver updates, and run diagnostic tests to identify any potential issues with the drive.
- If the drive is still experiencing issues, contact Dell technical support for further assistance or possible replacement if it’s under warranty.
Main Specifications
- Manufacturer: Dell
- Part Number or SKU# 400-BLQU
- Product Type: Solid State Drive
- Capacity: 1.92TB
Key Features
- Interface : SAS 12GBPS
- Form Factor : 2.5 Inch
- Features : Read-intensive Endurance, 512 Emulation (512e)
Expansion / Connectivity
- Interfaces : 1 X SAS 12Gb/s
- Compatible Bays : 1 X 2.5inch
Product Dimensions & Weight
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
Compatibility
- Poweredge C6420
- Poweredge C6525
- Poweredge R340
- Poweredge R440
- Poweredge R540
- Poweredge R640
- Poweredge R6415
- Poweredge R6515
- Poweredge R6525
- Poweredge R740
- Poweredge R740xd
- Poweredge R7415
- Poweredge R7425
- Poweredge R7515
- Poweredge R7525
- Poweredge R840
- Poweredge R940
- Poweredge R940xa
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
