Description
Installation and Setup
The 49Y9898 IBM 1.5TB/3TB LTO Ultrium-5 SAS HH Internal Tape Drive is a high-performance tape drive that can be used to store large amounts of data on LTO Ultrium-5 tapes. The drive is designed for use in servers and workstations, and can be installed and set up in a few simple steps.
- Unpack the tape drive and all its components, including the drive itself, the SAS cable, and the power cable.
- Connect the SAS cable to the tape drive and the SAS controller in the server or workstation. Make sure that the cable is securely connected at both ends.
- Connect the power cable to the tape drive and an electrical outlet.
- Turn on the server or workstation and log in as an administrator.
- Install the necessary drivers and software for the tape drive. These can typically be found on the IBM website or on the included installation disc.
- Once the drivers and software are installed, the tape drive should be automatically recognized by the server or workstation.
- Configure the tape drive settings according to your specific needs. This may include setting up backup schedules, configuring tape labeling and barcode options, and more.
- Once the tape drive is set up and configured, you can start using it to store and backup data. Make sure to regularly check the tape drive’s status and perform regular maintenance to ensure optimal performance.
Note: It is recommended to consult with the manufacturer’s guidelines and instructions while installing and setting up the 49Y9898 IBM 1.5TB/3TB LTO Ultrium-5 SAS HH Internal Tape Drive.
Maintenance and Troubleshooting
The 49Y9898 IBM 1.5TB/3TB LTO Ultrium-5 SAS HH Internal Tape Drive is a high-performance tape drive that is designed for use in data centers and other large-scale storage environments. It is capable of storing up to 1.5TB of data on a single cartridge, and can transfer data at speeds of up to 280MB/s.
To maintain the tape drive, it is important to regularly check the status of the drive and its associated hardware. This may include checking the firmware version, ensuring that the drive is properly connected to the host system, and verifying that the tape cartridges are loaded correctly. It is also important to regularly clean the drive, as dust and other debris can cause issues with the drive’s performance.
If the tape drive is experiencing any issues, it is important to troubleshoot the problem to determine the cause. This may involve checking the event logs for any error messages, running diagnostic tests on the drive, and checking the status of the drive’s hardware. If the problem cannot be resolved, it may be necessary to contact IBM for further assistance.
In addition to regular maintenance and troubleshooting, it is important to ensure that the tape drive is properly backed up, as data loss can occur due to hardware failure or other issues. This may involve creating regular backups of the data stored on the tape drive, and regularly testing these backups to ensure that they can be successfully restored in the event of a data loss.
General Compatibility
The 49Y9898 IBM 1.5TB/3TB LTO Ultrium-5 SAS HH Internal Tape Drive is a high-capacity tape drive that is designed for use in servers and other internal storage systems. It is compatible with a wide range of systems and platforms, including servers running Windows, Linux, and other operating systems. The drive is also compatible with a variety of backup and archival software, making it a versatile solution for businesses and organizations of all sizes. Additionally, the drive is equipped with SAS (Serial Attached SCSI) interface, which provides fast and reliable data transfer speeds, making it well suited for use in high-performance data centers and other mission-critical environments.
General Information
- Manufacturer: IBM
- MPN: 49Y9898
- Type: Tape Drive
- Tape Drive Type: Tape Storage
- SKU: 49Y9898
- Tape Type : Lto Ultrium-5
- Native Drive Capacity : 1.5TB
- Interface Type : SAS
- Enclosure Type : Internal
Technical Information
- Native Data Transfer Rate : 140 MBPS
- Compressed Data Transfer Rate : 280 MBPS
- Compressed Drive Capacity : 3TB
- Form Factor : 5.25 Inch Half High
- Buffer : 256 MB
Dimensions & Weight
- Width: 5.8 Inch
- Depth: 8.3 Inch
- Height: 1.7 Inch
- Weight: 3.53 Lbs







