For bulk orders contact sales via email sales@allhdd.com, via chat, or call our toll-free number 1-800-675-5044.

6Y7Y1 Dell 3.84TB SATA 6GBPS Mix Use TLC SSD | Brand New

Name: 6Y7Y1 Dell 3.84TB SATA 6GBPS Mix Use TLC SSD | Brand New
Brand: Dell
SKU: 6Y7Y1
Availability: InStock

$1,755.00

6Y7Y1 3.84TB Serial Advanced Technology Attachment (SATA) 6GBPS Mix Use Triple-Level Cell (TLC) 2.5 Inch Form Factor Solid State Drive | Made by Dell | Brand New

100 in stock

SKU: 6Y7Y1 Category: 3.84TB Brand: Dell

Description

Performance Specifications

The Dell 6Y7Y1 is a 3.84TB SATA solid state drive (SSD) with a 6 Gbps interface. It is designed for mixed use, meaning it is suitable for both read-intensive and write-intensive workloads.

The drive uses TLC (triple-level cell) NAND flash memory, which is less durable than MLC (multi-level cell) or SLC (single-level cell) memory but is also less expensive.

In terms of performance, the drive has a sequential read speed of up to 550 MB/s and a sequential write speed of up to 520 MB/s. Its random read speed is up to 95,000 IOPS (input/output operations per second) and its random write speed is up to 35,000 IOPS.

The drive also has a mean time between failures (MTBF) of 2 million hours and supports advanced features such as end-to-end data protection and power-loss protection.

Endurance and Reliability

The endurance and reliability of the Dell 6Y7Y1 3.84TB SATA 6GBPS Mix Use TLC SSD will depend on a variety of factors, including the specific use case and operating environment. TLC (Triple-Level Cell) SSDs typically have lower write endurance compared to other types of SSDs, such as MLC (Multi-Level Cell) or SLC (Single-Level Cell) SSDs. This means that they may not be suitable for applications that require heavy, constant writing to the drive, such as in a server environment or in a write-intensive application.

The Dell 6Y7Y1 3.84TB SATA 6GBPS Mix Use TLC SSD is specifically designed for a mix use environment and as such, it should have a good balance of read and write performance. However, it is always recommended to check the manufacturer’s specifications and consult with a technical expert before deploying the SSD for a specific use case.

In general, SSDs are more reliable than traditional hard drives due to the lack of moving parts, which means they are less likely to fail due to mechanical issues. However, like any electronic device, SSDs can still experience issues such as firmware bugs, power failures, and other types of hardware failures.

It is also important to note that SSDs have a limited number of write cycles before they will fail, so it’s important to monitor the drive’s health using monitoring software or firmware provided by the manufacturer.

Technical Support and Warranty

The technical support and warranty for the Dell 6Y7Y1 3.84TB SATA 6GBPS Mix Use TLC SSD will vary depending on the specific terms and conditions outlined by Dell. It is best to check with Dell directly or consult the documentation that came with the product for specific information on technical support and warranty coverage. In general, Dell provides technical support for its products and a limited warranty to protect against defects in materials and workmanship. The warranty may include options for repair or replacement of the product, and may also include additional services such as on-site support.

Installation and Setup

Installing and setting up the Dell 6Y7Y1 3.84TB SATA SSD is a straightforward process that can be completed in a few simple steps:

Make sure to properly shut down your computer and disconnect all cables before installing the drive.
Locate the drive bay on your computer where you will be installing the SSD. This will typically be a 2.5-inch bay, but some systems may have a 3.5-inch bay.
Carefully remove the existing drive, if there is one, by releasing any securing mechanisms and sliding it out of the bay.
Insert the Dell 6Y7Y1 SSD into the drive bay, making sure that it is properly aligned and securely seated.
Re-attach any cables or securing mechanisms.
Power on your computer and boot into the BIOS (basic input/output system) or UEFI (unified extensible firmware interface) settings.
Locate the “Storage” or “Drive Configuration” menu and set the SSD as the primary boot device.
Save the changes and exit the BIOS/UEFI settings.
Boot your computer from an operating system installation disc or USB drive and begin the process of installing the operating system onto the new SSD.

Once the installation is complete, your computer will boot from the new SSD, and you can begin using it as your primary storage device.

Detail Description