Description
Redundancy and High Availability
The ASR1013/06-PWR-DC Cisco plug-in module hot-plug 1600W 48V power supply is designed to provide power to the Cisco ASR 1013 router and it is also built to provide redundancy and high availability for the router.
The power supply supports redundancy by providing dual power inputs, which allows for a secondary power source to take over in the event of a failure of the primary power source. This ensures that the router continues to operate even if one of the power supplies fails.
The power supply also supports high availability by being hot-pluggable, which allows for easy replacement of the power supply without shutting down the router. This allows for minimal downtime and ensures that the router remains operational at all times.
In addition, the power supply also supports power redundancy through the use of an internal power supply unit (PSU) redundancy feature. This feature allows the router to continue operating even if one of the internal PSUs fails.
Power Efficiency and Energy Savings
The ASR1013/06-PWR-DC Cisco plug-in module hot-plug 1600W 48V power supply is designed to provide power to the Cisco ASR 1013 router while also being energy efficient and saving energy.
The power supply is Energy Star 2.0 and 80 Plus Platinum certified, which means it has an efficiency rating of at least 92%. This means that for every 100 watts of power it consumes, it will deliver at least 92 watts of power to the router. This can result in significant energy savings over time.
Additionally, the power supply also has a built-in power management feature that allows for the control of the module’s power consumption. The power management feature can be accessed through the Cisco IOS command-line interface (CLI) using the “power inline” command. This command allows for the setting of a maximum power consumption limit and the ability to enable or disable the power supply.
The power supply also has a built-in temperature sensor that can be monitored to ensure that the module is operating within safe temperature limits, this will help to prevent overheating and prolong the life of the power supply.
Installation and Configuration
The ASR1013/06-PWR-DC Cisco plug-in module hot-plug 1600W 48V power supply is designed to provide power to the Cisco ASR 1013 router. It is a hot-pluggable module, which allows for easy replacement without shutting down the router. Here are the steps for installation and configuration of the ASR1013/06-PWR-DC power supply:
- Prepare the ASR 1013 router for installation by ensuring that the router is powered off and unplugged from the power source.
- Locate the power supply module bay on the router and remove the blank faceplate if present.
- Carefully insert the power supply module into the bay and ensure that it is securely seated.
- Connect the DC power cables to the power supply module.
- Power on the router and check the status of the power supply module using the Cisco IOS command-line interface (CLI) by using the command “show power inline”.
- Configure the power management feature of the power supply module by using the “power inline” command in the CLI. This command allows for the setting of a maximum power consumption limit and the ability to enable or disable the power supply module.
- Monitor the temperature of the power supply module using the “show environment temperature” command in the CLI to ensure that it is operating within safe temperature limits.
- Configure the alarm feature of the power supply module by using the “configure terminal” command in the CLI to set up SNMP traps for power failure or other power-related issues.
It’s important to note that the ASR1013/06-PWR-DC power supply requires 48VDC input voltage and it’s important to verify that the power source meets the requirement before installing it.
Main Information about this Cisco ASR1013/06-PWR-DC
- Manufacturer: Cisco
- Part Number or SKU # ASR1013/06-PWR-DC
- Device Type: Proprietary Power Supply
Power Description of DC Power Supply
- 1600 Watt DC Power Module
- Input Voltage Type DC
- Input Voltage -48 V DC
- Input Voltage -60 V DC
- Input Voltage Range -40.5 V DC to -72 V DC
- Output Voltage 3.3 V DC, 3.13 A
- Output Voltage 12 V DC, 136 A
Miscellaneous
- Compatibility-
- Cisco ASR1000 Aggregation Services Router-Chassis
- Cisco Aggregation Services Routers:
- ASR 1013
- ASR 1006
