Description
Antenna Connector Types and Compatibility
The Cisco AIR-ANT5114P2M-N is a 5-GHz 14-dBi directional antenna designed for use with Cisco Aironet wireless access points or other 5-GHz radios with RP-TNC (Reverse Polarity Threaded Neill-Concelman) connectors. The RP-TNC connectors are gender-specific, with the antenna featuring a female RP-TNC connector and the radio featuring a male RP-TNC connector.
It is important to note that not all antennas and radios are compatible with each other due to variations in connector type and gender. Therefore, it is important to ensure that the antenna and radio connectors are compatible before attempting to connect them.
Here are some commonly used antenna connector types:
- RP-TNC: This connector type is commonly used for Cisco Aironet and other Wi-Fi radios. RP-TNC connectors are threaded connectors that require a 1/4 turn to secure the connection.
- N-Type: This connector type is commonly used for higher frequency applications, including cellular, Wi-Fi, and satellite communications.
- SMA (SubMiniature version A): This connector type is commonly used for smaller, lower power antennas.
- BNC (Bayonet Neill-Concelman): This connector type is commonly used for video and audio applications, including CCTV cameras.
Installation and Configuration Guide
The Cisco AIR-ANT5114P2M-N Aironet 5-GHz 14-dBi Directional Antenna is a powerful device that enhances wireless coverage and signal strength in outdoor environments. This guide provides instructions on how to install and configure the antenna for optimal performance.
Installation:
- Before mounting the antenna, ensure that it is compatible with your access point and that the connector type matches.
- Locate a suitable location for mounting the antenna. It should be high enough to avoid obstacles and interference.
- Use the mounting bracket and hardware provided with the antenna to secure it in place. Ensure that it is properly aligned in the desired direction.
- Connect the antenna cable to the access point’s antenna port.
Configuration:
- Access your access point’s web-based interface and navigate to the wireless settings.
- Locate the antenna configuration section and select the appropriate antenna type (in this case, a directional antenna).
- Set the antenna gain to 14 dBi to match the antenna’s specifications.
- Adjust the antenna’s directional pattern to match the desired coverage area.
- Save the changes and test the wireless signal strength to ensure that it has improved.
Benefits of Using
The Cisco AIR-ANT5114P2M-N Aironet 5-GHz 14-dBi Directional Antenna is a high-gain antenna designed for use with Cisco Aironet access points. Here are some of the benefits of using this antenna:
- Increased Coverage: The 14 dBi gain of this directional antenna can significantly increase the coverage area of your wireless network, allowing you to reach more clients and cover larger areas.
- Improved Performance: This antenna can improve the signal strength and quality of your wireless network, leading to better performance and faster data transfer speeds.
- Directional Coverage: The directional design of this antenna means that it can be pointed in a specific direction to focus the wireless signal, reducing interference from other devices and improving the quality of the signal for clients in that direction.
- Easy Installation: The Cisco AIR-ANT5114P2M-N is easy to install and can be used with a variety of Cisco Aironet access points. It comes with a mounting kit and can be easily mounted to a wall or pole.
- Weather Resistant: This antenna is designed to withstand harsh outdoor environments, with a rugged, weather-resistant design that can handle rain, wind, and extreme temperatures.
General Information about this Cisco AIR-ANT5114P2M-N
- Part Number or SKU# AIR-ANT5114P2M-N
- Manufacturer: Cisco
- Product Type: Antenna
Technical Information of 5GHz Antenna
- Directivity: Directional
- Frequency Band Type: SHF
- Frequency: 5.15 GHz to 5.90 GHz
- Application/Usage: Wireless Data Network Outdoor
- Form Factor: Pole/Wall
- Antenna Gain: 14 dBi
Interfaces & Ports for N-type Mounting Kit
- Connector Type: N-Type
Dimensions & Weight
- Height: 1.2Inch
- Width: 7.8Inch
- Depth: 7.8Inch
- Weight (Approximate): 1.35 lbs
