Description
Features and Benefits of the HX-PSU1-1600W
The Cisco HX-PSU1-1600W is a 1600 Watt AC power supply designed for use with the Cisco HyperFlex Systems. Some of its key features and benefits include:
- High Efficiency: The HX-PSU1-1600W is designed to be highly efficient, reducing power consumption and helping to reduce operating costs.
- Hot-Plug Design: The power supply is designed to be hot-plug, allowing it to be replaced without affecting the operation of the system.
- Redundant Operation: The HX-PSU1-1600W can be used in a redundant configuration, providing increased reliability and availability for your system.
- Wide Input Voltage Range: The power supply has a wide input voltage range, allowing it to be used in a variety of electrical environments.
- Flexible Deployment: The HX-PSU1-1600W can be deployed in a variety of configurations, providing flexibility for different deployment scenarios.
- Increased Power Capacity: With a 1600 Watt output capacity, the HX-PSU1-1600W provides increased power capacity for your system.
These features and benefits make the HX-PSU1-1600W an ideal choice for powering the Cisco HyperFlex Systems and ensuring high performance, reliability, and availability.
Configuration and Management of the HX-PSU1-1600W
The Cisco HX-PSU1-1600W is a 1600 Watt AC power supply for use with the Cisco HyperFlex HX-Series. The configuration and management of this power supply involves the following steps:
Installation:
- Turn off the power to the device
- Remove the old power supply (if applicable)
- Install the Cisco HX-PSU1-1600W into the device following the instructions provided by Cisco
- Connect the power cord to the power supply and an electrical outlet
- Turn on the power to the device
Management:
- Log in to the Cisco HyperFlex management interface
- Go to the “Hardware” section
- Find the power supply in the list of components
- View the status and other information about the power supply
- Manage the power supply settings and configurations as needed
It is important to follow the installation and management instructions provided by Cisco carefully to ensure proper operation and to avoid any potential damage to your device.
Compatibility with Cisco Network Devices
The Cisco HX-PSU1-1600W is a 1600 Watt AC power supply designed for use with specific Cisco HyperFlex All-Flash systems. It is compatible with the following devices:
- Cisco HyperFlex All-Flash HX240c M5 Nodes
- Cisco HyperFlex All-Flash HX220c M5 Nodes
It is important to check the specifications of your device and compare it with the compatibility list provided by Cisco to ensure the HX-PSU1-1600W is suitable for your device. Additionally, make sure the voltage and amperage requirements of the HX-PSU1-1600W are compatible with your equipment.
General Information about this Cisco HX-PSU1-1600W
- Manufacturer: Cisco
- Part Number or SKU# HX-PSU1-1600W
- Product Type: Power Supply
Technical Information for 1600 Watt AC Power Supply
- Interface: Power supply – hot-plug / redundant
- Subcategory: Power supplies
Power Device
- Power Provided: 1600 Watt Server PSU
- Voltage Required: AC 200/240 V
- Frequency Required: 50 – 60 Hz
- Voltage Provided: 12 V
- Input Connector Type: Power IEC 60320 C14
- Form Factor: Plug-in module
- Power Supply Compatibility: PC/Server
- 80 PLUS Certification: 80 PLUS Platinum
