Description
Specifications of Voice Fax
The NIM-2BRI-NT/TE is a Cisco 2 Ports Expansion Module that provides two Basic Rate Interface (BRI) ports for Cisco ISR G2 Series routers. Here are the specifications of this expansion module:
- Interface Type: The NIM-2BRI-NT/TE module supports two BRI ports. The ports can be configured as either Network Termination (NT) or Terminal Equipment (TE) modes.
- Maximum Data Transfer Rate: The BRI ports on the module support a maximum data transfer rate of 128 Kbps per channel, providing a total bandwidth of 256 Kbps for both channels.
- Interface Connector: The module uses RJ-45 connectors for both BRI ports.
- Compatibility: The NIM-2BRI-NT/TE expansion module is compatible with Cisco ISR G2 Series routers, including the Cisco 1900, 2900, and 3900 Series routers.
- Power Consumption: The module has a maximum power consumption of 4.5 watts.
- Operating Temperature: The module can operate in temperatures ranging from 32°F to 104°F (0°C to 40°C).
- Humidity: The module can operate in relative humidity ranging from 5% to 95%, non-condensing.
Installation of Expansion Module
The NIM-2BRI-NT/TE is a Cisco expansion module that adds two ports of Basic Rate Interface (BRI) connectivity to supported Cisco Integrated Services Routers (ISR). BRI is a digital communications interface used to connect Integrated Services Digital Network (ISDN) devices, such as telephones and fax machines, to a digital network.
Here are the steps to install the NIM-2BRI-NT/TE module:
- Shut down the router and disconnect all cables.
- Locate an available Network Interface Module (NIM) slot on the router.
- Remove the slot cover from the NIM slot by pressing down on the ejector latch and sliding the cover out of the slot.
- Align the NIM-2BRI-NT/TE module with the slot, making sure that the connector pins on the module are properly aligned with the slot pins.
- Slide the module into the slot until it is firmly seated.
- Use the thumbscrews on either side of the module to secure it in place.
- Reconnect all cables and power on the router.
- Use the command “show inventory” to confirm that the module has been detected by the router.
- Use the appropriate commands to configure the BRI interfaces as needed.
Security Features
The NIM-2BRI-NT/TE Cisco 2 Ports Expansion Module provides several security features to help protect your network and data. Some of the key security features of this module are:
- Encrypted Communication: The module supports encryption standards such as Secure Real-Time Transport Protocol (SRTP) and Transport Layer Security (TLS) to secure communication between ISDN devices and the network.
- Access Control: The module supports access control lists (ACLs) that allow you to restrict access to the BRI interfaces based on IP addresses, protocols, or other criteria.
- Authentication: The module supports authentication protocols such as Remote Authentication Dial-In User Service (RADIUS) and Terminal Access Controller Access-Control System Plus (TACACS+) to verify the identity of users who attempt to access the BRI interfaces.
- Denial-of-Service (DoS) Prevention: The module supports DoS prevention mechanisms that help protect the router and network from attacks such as flooding, spoofing, and other types of attacks that can overwhelm network resources.
- Firewall: The module supports firewall features that enable you to filter traffic based on source or destination IP addresses, protocols, and other criteria. This can help prevent unauthorized access and protect your network from malicious traffic.
General Information
- Manufacturer: Cisco Systems, Inc
- Manufacturer Part Number: NIM-2BRI-NT/TE
- Brand Name: Cisco
- Product Name: 2-Ports Network Interface Module
- Product Type: Expansion Module
- Application/Usage: Data Networking
- Interfaces/Ports Details: 2 x ISDN BRI Network
Compatibility-
- Cisco 4000 Series Integrated Services Routers:
- 4451-X Integrated Services Router Security Bundle
- 4451-X Integrated Services Router Voice and Video Bundle
- 4451-X Integrated Services Router Voice Security Bundle
Please contact us over the phone or ask for live chat/help if you have any questions about the estimated time of arrival for any “lead time required” item.