Description
Installation and Replacement
To install a PWR-1700-WW1 Cisco AC power supply, you will need to follow these steps:
- Ensure that the power to the device is turned off and that the device is properly grounded.
- Remove the power supply cover from the device by releasing the latches or screws that hold it in place.
- Insert the new power supply into the device, making sure that it is properly aligned and securely fastened.
- Connect the AC power cord to the new power supply and plug it into an appropriate power outlet.
- Turn the power to the device back on and verify that the power supply is functioning properly.
As for replacement, it is similar with installation but you will need to remove the old power supply first before installing the new one. Make sure to refer to the user guide/manual for specific instructions for your device and use caution when working with electrical equipment.
Power Management and Monitoring
The PWR-1700-WW1 Cisco AC Power Supply has built-in power management and monitoring capabilities that allow for monitoring of power usage and status of the power supply. These capabilities include:
- Power monitoring: The power supply provides real-time information on input voltage, input current, output voltage, and output current. This information can be accessed through the Cisco IOS command-line interface (CLI) or through a web interface.
- Power usage monitoring: The power supply can monitor the total power usage of the device or devices connected to it. This information can be accessed through the Cisco IOS CLI or through a web interface.
- Power consumption alerts: The power supply can be configured to send alerts when power consumption reaches a certain threshold. These alerts can be sent through email or SNMP traps.
- Power redundancy: The power supply can be configured in a redundant power configuration, where a second power supply is connected to the device and can take over in case the primary power supply fails.
- Remote management: The power supply can be managed remotely through a web interface or through the Cisco IOS CLI. This allows for monitoring and configuration of the power supply from a remote location.
Input Voltage and Frequency Requirements
The input voltage and frequency requirements for the PWR-1700-WW1 Cisco AC power supply are as follows:
- Input voltage range: 100-240 VAC
- Input frequency: 50-60 Hz
This means that the power supply can accept a wide range of input voltages, from 100 to 240 VAC, and can operate with input frequencies of either 50 or 60 Hz. This makes it suitable for use in a variety of different locations and with different types of electrical systems.
Key Information for this Cisco PWR-1700-WW1
- Manufacturer: Cisco
- Part Number or SKU # PWR-1700-WW1
- Product Name: AC Power Supply
- Product Type: Proprietary Power Supply
Power Description of AC Power Supply
- Input Voltage Type AC
- Input Voltage 220 V AC
- Input Voltage 110 V AC
- Input Voltage Range 220 V AC
- Input Voltage Range 110 V AC
Miscellaneous
- Compatibility
- Cisco 1720
- Cisco 1700
