Description
Key Features and Benefits of the SPA-10X1GE-V2= Module
The SPA-10X1GE-V2= is a Cisco 10-Ports Expansion module designed to be used with Cisco ASR 9000 series routers. Here are some key features and benefits of this expansion module:
- High-speed connectivity: The SPA-10X1GE-V2= expansion module provides 10 ports of Gigabit Ethernet connectivity, allowing you to connect a variety of devices to the router at high speeds.
- Flexibility: This expansion module is hot-swappable and can be installed or removed while the router is in operation, allowing you to add or remove Gigabit Ethernet ports as needed without disrupting network traffic.
- Scalability: The SPA-10X1GE-V2= expansion module allows you to scale your network infrastructure as your needs grow, providing additional Gigabit Ethernet ports as needed.
- Quality of Service (QoS): This expansion module supports advanced QoS features such as traffic shaping and policing, allowing you to prioritize critical network traffic and ensure that it receives the necessary bandwidth and resources.
- Compatibility: The SPA-10X1GE-V2= expansion module is designed to be used with Cisco ASR 9000 series routers, providing a seamless integration with other Cisco network components.
- Cost-effective: By providing 10 ports of Gigabit Ethernet connectivity in a single expansion module, the SPA-10X1GE-V2= can help to reduce the overall cost of your network infrastructure compared to using multiple smaller modules.
Installation Process for the SPA-10X1GE-V2= Module
The SPA-10X1GE-V2= is a 10-Ports Expansion module that can be used with a variety of Cisco routers and switches. This module provides ten Gigabit Ethernet ports, which can be used to expand the network connectivity of your device. Here are the steps for installing the SPA-10X1GE-V2= Cisco 10-Ports Expansion module:
- Power off the device: Before installing the expansion module, power off the device and disconnect any cables.
- Install the module: Insert the SPA-10X1GE-V2= expansion module into an available slot on your device. Make sure to align the module with the guide rails and firmly press it in until it clicks into place.
- Secure the module: If your device has a securing mechanism, such as screws or a latch, use it to secure the module in place.
- Connect cables: Connect the network cables to the ports on the expansion module. The SPA-10X1GE-V2= module has ten Gigabit Ethernet ports, so you can use these ports to connect to other network devices.
- Power on the device: After installing the expansion module and connecting the cables, power on your device.
- Configure the module: Once the device has booted up, log in to the device’s CLI (command-line interface) and configure the module. You can use commands like “show interfaces” and “show running-config” to verify that the module is installed correctly and to configure its settings.
- Verify connectivity: Finally, test the connectivity of the expansion module by sending traffic through it and verifying that it is being processed correctly. You can use tools like ping or traceroute to test network connectivity.
Compatible Devices and Software for the SPA-10X1GE-V2= Module
The SPA-10X1GE-V2= is a 10-Ports Expansion module designed for use with Cisco Carrier Routing System (CRS) and 12000 series routers. This module provides 10 Gigabit Ethernet ports, which can be used to increase network capacity and performance. Here’s a summary of the compatible devices and software for the SPA-10X1GE-V2= module:
- Compatibility with Cisco routers: The SPA-10X1GE-V2= module is compatible with Cisco CRS-1, CRS-3, CRS-X, and 12000 series routers. However, it’s important to note that the module may not be compatible with certain hardware or software configurations, so it’s always a good idea to check the compatibility matrix provided by Cisco for your specific router and module combination.
- Compatibility with network protocols: The Gigabit Ethernet ports on the SPA-10X1GE-V2= module support the 10/100/1000 Mbps Ethernet standard, which is a widely used networking protocol. The module also supports jumbo frames, which allows for the transmission of larger packets than the standard Ethernet frame size.
- Compatibility with software releases: The SPA-10X1GE-V2= module is compatible with a wide range of software releases for the Cisco routers it supports. However, compatibility should always be verified with the specific hardware and software configuration being used.
- Compatibility with other modules: The SPA-10X1GE-V2= module is part of the Cisco Shared Port Adapter (SPA) portfolio, which includes a wide range of interface modules that can be used with Cisco routers. The module is compatible with other SPA modules, and you can mix and match different SPA modules on the same router chassis to create a customized networking solution.
General Information
- Manufacturer: Cisco Systems, Inc
- Manufacturer Part Number: SPA-10X1GE-V2=
- Brand Name: Cisco
- Product Name: 10-Port Gigabit Ethernet Shared Port Adapter
- Product Type: Shared Port Adapter
- Device Type: Expansion module
Technical Information
- Application/Usage: Data Networking
Media & Performance
- Connectivity Media: Optical Fiber
- Data Transfer Rate: 1 Gbps Gigabit Ethernet
I/O Expansions
- Expansion Slots: 10 x SFP (mini-GBIC)
Management & Protocols
- Management-
- Host-system CLI
- Simple Network Management Protocol (SNMP)
- RMON
- VLAN
Miscellaneous
- Additional Information:
- Autonegotiation
- Jumbo-frames support (9188 bytes)
- Ethernet over Multiprotocol Label Switching (EoMPLS)
- Bridge protocol data unit (BPDU), Cisco Discovery Protocol, and VLAN Trunking Protocol (VTP) filtering
- Layer 2 Protocol (BPDU, Cisco Discovery Protocol, and VTP) Tunneling
- Layer 2 access lst (MAC address-based filtering)
- Up to 8000 VLANs per SPA and subject to a limit of 4000 VLANs per port for 802.1q