Description
Error Correction and Data Integrity
The Cisco 64GB DDR4 SDRAM (UCS-ML-1X644RV-A) features Error Correction Code (ECC) technology, which helps to ensure data integrity and prevent data corruption. ECC is a system of data protection that detects and corrects single-bit errors in memory, improving the reliability and stability of the system.
The ECC technology in the Cisco 64GB DDR4 SDRAM is registered, which helps to reduce system-level errors and improve overall system performance. The registered design also provides better memory organization and improves the memory’s ability to manage high-density configurations.
The combination of ECC technology and a registered design helps to ensure that the Cisco 64GB DDR4 SDRAM provides high levels of data integrity and system reliability, making it well-suited for use in mission-critical applications and high-performance computing environments.
It is important to note that the actual level of data integrity and system reliability will depend on several factors, including the specific system configuration, the type of applications being run, and the overall system load. To ensure optimal levels of data integrity and system reliability, it is recommended to consult with a technical expert and to follow the manufacturer’s guidelines for configuring and installing the DDR4 SDRAM.
Installation and Configuration Guide
Installing and configuring the Cisco 64GB DDR4 SDRAM (UCS-ML-1X644RV-A) in your Cisco system involves several steps, including:
- Checking system compatibility: Before purchasing the DDR4 SDRAM, make sure it is compatible with your specific Cisco system. This can be done by checking the manufacturer’s product datasheet or the system compatibility list on the Cisco website.
- Turning off the system: Before installing the DDR4 SDRAM, make sure to turn off the system and unplug it from the power source to avoid any electrical hazards.
- Removing the system cover: Follow the manufacturer’s instructions for removing the system cover and accessing the memory slots.
- Installing the DDR4 SDRAM: Insert the DDR4 SDRAM into the appropriate memory slot and secure it using the retention clips.
- Powering on the system: After installing the DDR4 SDRAM, power on the system and allow it to boot up normally.
- Configuring the memory: Follow the manufacturer’s instructions for configuring the memory in your specific Cisco system, including setting the correct speed and latency settings.
- Testing the installation: After configuring the memory, test the installation by running memory diagnostic tests and other performance tests to make sure the DDR4 SDRAM is functioning properly.
It is important to follow the manufacturer’s instructions carefully and to consult with a technical expert if you are unsure about any aspect of the installation and configuration process. Improper installation or configuration may result in system performance issues, stability problems, or even hardware damage, so it is important to take the time to properly install and configure the DDR4 SDRAM.
Maintenance and Troubleshooting
To maintain optimal performance and stability of the Cisco 64GB DDR4 SDRAM (UCS-ML-1X644RV-A), it is recommended to follow these guidelines:
- Keep the system clean: Regularly dust the system and memory modules to prevent overheating and other issues.
- Monitor system performance: Regularly monitor system performance using built-in tools or third-party software to identify any potential issues and address them in a timely manner.
- Check for firmware updates: Check the manufacturer’s website regularly for firmware updates that may improve performance and stability of the DDR4 SDRAM.
- Handle the DDR4 SDRAM properly: When handling the DDR4 SDRAM, make sure to handle it by the edges and to avoid touching the pins or other components.
In the event of any issues with the Cisco 64GB DDR4 SDRAM, the following troubleshooting steps may be helpful:
- Check system compatibility: Make sure the DDR4 SDRAM is compatible with your specific Cisco system and that it is installed and configured correctly.
- Check system settings: Make sure the speed and latency settings are configured correctly for the DDR4 SDRAM.
- Run diagnostic tests: Run built-in memory diagnostic tests or third-party software to check for any issues with the DDR4 SDRAM.
- Check for firmware updates: Make sure the latest firmware is installed on the system and the DDR4 SDRAM.
- Consult with a technical expert: If you are unable to resolve the issue on your own, consult with a technical expert or contact the manufacturer for support.
It is important to follow these guidelines and troubleshooting steps carefully to ensure optimal performance and stability of the DDR4 SDRAM and to prevent any potential hardware damage.
General Information
- Manufacturer: Cisco
- Manufacturer Part Number: UCS-ML-1X644RV-A=
- Product Name: 64GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 64GB
- Memory Technology: DDR4 SDRAM
- Number of Modules: 1 X 64GB
- Bus Speed: 2400MHZ DDR4-2400/PC4-19200
- Data Integrity Check: ECC
- Signal Processing: Registered
- Cas Latency Timings: CL17
- Rank Features: 4RX4
