Description
Product Overview
The Dell 03VNY 64GB DDR4 SDRAM memory module is a high-performance memory solution designed for use in servers and high-end workstations. With a capacity of 64GB, it provides a significant boost in memory capacity compared to standard memory modules. This memory module is built using the latest DDR4 technology which offers faster speeds and improved power efficiency compared to DDR3 memory.
The memory module has a speed of 2400MHz, which is the speed at which it can transfer data, and it conforms to the PC4-19200 standard. It also has a CAS latency of 17, which is the delay time between the processor’s request for data and the moment it becomes available.
This memory module is ECC Registered, which provides an extra level of data protection by detecting and correcting errors in memory operations. ECC memory is commonly used in servers and other high-end systems where data integrity is a critical concern.
It is built with Quad Rank X4 DDR4 SDRAM and has 288-Pin Lrdimm form factor. This memory module is designed to be installed on motherboards that have 288-pin LRDIMM memory slots and supports quad-rank memory.
Benefits of Using ECC Registered Memory
ECC (Error Correcting Code) registered memory provides several benefits that make it ideal for use in servers and other high-end systems where data integrity is a critical concern.
- Data Protection: ECC memory is able to detect and correct errors in memory operations, which helps to prevent data corruption and system crashes. This is particularly important for systems that run mission-critical applications or handle sensitive data.
- Improved Reliability: ECC memory is able to detect and correct errors, which reduces the likelihood of system crashes and downtime. This can help to improve the overall reliability of a system and reduce the costs associated with system failures.
- Enhanced Performance: ECC memory is able to detect and correct errors in memory operations, which can help to improve system performance. This is because the system does not have to spend time and resources dealing with errors, which can slow down the system.
- Cost-effective: ECC memory can be more cost-effective in the long run than non-ECC memory because it helps to prevent data corruption and system crashes, which can be costly to repair.
- Scalability: ECC memory is also scalable, which means that it can be used in larger systems with multiple processors and high memory capacities.
Installation and Setup Guide
Installing and setting up the Dell 03VNY 64GB DDR4 SDRAM memory module is a straightforward process that can typically be completed in a few simple steps.
- Turn off the computer and unplug it from the power source.
- Open the computer’s case to access the memory slots.
- Locate the memory slots on the motherboard, they should be near the processor.
- Carefully remove any existing memory modules by releasing the tabs on either side of the memory slot.
- Carefully align the notches on the memory module with the notches on the memory slot.
- Gently press down on the memory module until it clicks into place.
- Close the computer’s case and reconnect the power.
- Turn on the computer and enter the system’s BIOS or UEFI firmware settings.
- Look for memory configuration settings and ensure that the computer recognizes the new memory module.
- Save the changes and exit the BIOS.
Please note that the above steps are a general guide, and the specific steps may vary depending on the make and model of your computer. It’s always recommended to refer to the computer’s user manual or the motherboard’s manual for detailed instructions.
It’s also important to be careful when handling the memory module and to ground yourself to prevent static electricity from damaging the memory module or the motherboard.
General Information
- Manufacturer: Dell
- Manufacturer Part Number: 03VNY
- Type: Memory (RAM)
- Sub-Type: PC4-19200
- Product Name: 64GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 64GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 64GB
- Bus Speed: 2400mhz DDR4-2400/PC4-19200
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl17
- Rank Features: 4rx4
Compatibility
- Poweredge C4130
- Poweredge Fc630
- Poweredge Fc830
- Poweredge M630
- Poweredge M830
- Poweredge R630
- Poweredge R730
- Poweredge R730xd
- Poweredge R930
- Poweredge T630
