Description
High Performance
The 210-ABOH Dell Networking N3048P Switch is a 48-port L3 managed switch that provides high performance network connectivity for small to medium-sized businesses. It is designed to support advanced network features, such as virtual LANs (VLANs), Quality of Service (QoS), and Link Aggregation Control Protocol (LACP). The switch also provides support for layer 3 routing protocols, such as OSPF and BGP, which allows for more advanced network configurations and increased network efficiency.
The switch is designed for high-performance applications, with a hardware-based switching engine that can handle a large amount of network traffic at high speeds. The switch also supports 10GbE uplinks, which provides a fast and reliable connection to other network devices.
The N3048P switch is easy to manage, with an intuitive web-based interface that provides easy access to advanced network features and settings. The switch also supports Simple Network Management Protocol (SNMP), which allows for remote monitoring and management of the switch from a central location.
Data Protection and Security
The 210-ABOH Dell Networking N3048P Switch is a 48-port L3 managed switch designed for data protection and security. The “L3” designation means that this switch provides advanced routing capabilities, allowing it to handle complex networking scenarios and direct traffic to the right location. The switch is managed, meaning it can be configured and monitored remotely through a web interface or command-line interface.
This switch also provides data protection and security features, such as:
- Access control: The switch can be configured to restrict access based on IP address, MAC address, or other criteria, ensuring that only authorized users and devices can access the network.
- VLANs: The switch can create separate virtual LANs (VLANs), allowing for segmentation of the network and improved security.
- Link aggregation: The switch supports link aggregation, which allows multiple physical ports to be combined into a single logical link for increased bandwidth and reliability.
- Quality of Service (QoS): The switch can prioritize network traffic based on specific criteria, such as priority of applications, to ensure that critical data is transmitted quickly and efficiently.
- Spanning Tree Protocol (STP): The switch uses STP to prevent loops in the network and improve stability and reliability.
Robust Security and Dynamic Quality
The 210-ABOH Dell Networking N3048P Switch is a 48-port L3 managed switch designed for robust security and dynamic quality. It is a powerful networking device that offers advanced features for managing and securing a network. The switch supports L3 routing capabilities, allowing administrators to configure complex network topologies and prioritize network traffic.
The N3048P Switch has robust security features, including 802.1x authentication, VLANs, and Advanced Access Control Lists (ACLs) to help prevent unauthorized access and protect sensitive information. Additionally, the switch supports dynamic Quality of Service (QoS) that automatically prioritizes network traffic based on the type of traffic and its importance.
This switch is also equipped with advanced network management features, including SNMP, RMON, and Simple Network Management Protocol (SNMP) trap support, making it easy to monitor and manage the network. The N3048P Switch also supports software-defined networking (SDN), enabling administrators to configure and manage their network using a centralized, automated approach.
Key Features
- Device Type : Switch 48 Ports L3 Managed Stackable
- Enclosure Type : Rack-Mountable 1U
- Subtype : 10 Gigabit Ethernet
- Ports : 48 X 10 Gigabit SFP+ + 2 X 40 Gigabit QSFP+
- Performance : Switching Fabric Bandwidth : 1.28 TBPS Forwarding Performance : 952 Mpps
- Capacity : Mac Addresses : 131072 IPV4 Routes (Static) : 1024 IPV6 Routes (Static) : 1024 IPV4 Routes (Dynamic) : 8160 IPV6 Routes (Dynamic) : 4096 Maximum Member Ports Per Lag : 8 Maximum Dynamic Ports Per Switch Stack : 144 LAG Groups : 128 Priority Queues Per Port : 8 OSPF Routes : 8160 RIP Routes : 512 Ecmp Next Hops Per Route : 4 Ecmp Groups : 1024 Vlan Routing Interfaces : 128 Vlans Supported : 4094 Multicast Entries (IPV4) : 512 Multicast Entries (IPV6) : 256 ARP Entries : 6144 NDP Entries : 400 ACL : 100 Maximum Rules Per ACL : 1023 Max ACL Rules System-Wide : 3072 Maximum ACL Rules Per Interface (IPV4) Egress Rules : 1023 Maximum ACL Rules Per Interface (IPV4) Ingress Rules : 2047 Maximum ACL Rules Per Interface (IPV6) Egress Rules : 512 Maximum ACL Rules Per Interface (IPV6) Ingress Rules : 1021 Maximum Vlan Interfaces With ACLS Applied : 24
- Mac Address Table Size : 131072 Entries
- Routing Protocol : OSPF, RIP-1, RIP-2, IGMPV2, IGMP, VRRP, OSPFV2, PIM-SM, PIM-DM, IGMPV3, OSPFV3, MLDV2, MLD
- Remote Management Protocol : SNMP 2, SNMP, RMON, HTTP, SSH
- Encryption Algorithm : AES, SSL, TLS 1.0
- Authentication Method : Radius, TACACS+, LDAP
- Features : Layer 3 Switching, Layer 2 Switching, MDI/MDI-X Switch, Auto-Negotiation, Port Mirroring, Stackable, Broadcast Storm Control, IP Address Filtering, Access Control List (ACL) Support, Quality Of Service (QOS), Dynamic ARP Inspection (DAI), LLDP Support, Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), Dual Firmware Images, Redundant Fans, Mac And IP-Based ACLS Support, Time-Controlled ACLS Support, Protocol-Based Vlans Support
- Compliant Standards : IEEE 802.2, IEEE 802.3, IEEE 802.3U, IEEE 802.3Z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3AB, IEEE 802.1P, IEEE 802.3X, IEEE 802.3AD (LACP), IEEE 802.1W, IEEE 802.1X, IEEE 802.3AE, IEEE 802.3AC, IEEE 802.1S, IEEE 802.1V, ANSI/TIA-1057, IEEE 802.1AG, IEEE 802.1AB (LLDP), IEEE 802.3AZ, IEEE 802.1QBB, IEEE 802.1QAZ
- RAM : 2 GB
- Flash Memory : 256 MB
Expansion / Connectivity
- Interfaces : 48 X 10 Gbit LAN SFP+ 2 X 40 Gbit LAN QSFP+ 1 X Gigabit LAN RJ-45 Management 1 X Serial (Rs-232) RJ-45 Management 1 X USB Type A
- Expansion Slots : 1 (Total) / 1 (Free) X Expansion Slot
Power
- Power Device : Internal Power Supply Hot-Plug
- Installed Qty : 2 (Installed) / 2 (Max)
- Power Redundancy : Yes
- Power Provided : 460 Watt
- Power Consumption Operational : 395 Watt.
