Description
Accelerate workload performance
The Dell EMC PowerEdge Express Flash NVMe PM1725a and PM1725b are high-performance, NVMe-based, read-intensive solid state drives (SSDs) that are designed for use in Dell EMC PowerEdge servers. The PM1725a and PM1725b offer large capacities, high read performance, and consistent low latencies.
The PM1725a is available in capacities of 7.68TB and 15.36TB, and uses Triple-Level Cell (TLC) NAND flash memory. The PM1725b is available in capacities of 3.84TB, 7.68TB, and 15.36TB, and uses Multi-Level Cell (MLC) NAND flash memory. The PM1725b provides higher endurance than PM1725a.
The PM1725a and PM1725b offer sequential read and write speeds of up to 3.3GB/s and 2.0GB/s, respectively, and random read and write speeds of up to 2.6 million IOPS and 600,000 IOPS, respectively. Both drives also offer consistent low latencies, with read latencies as low as 40 microseconds and write latencies as low as 50 microseconds.
Both PM1725a and PM1725b uses 12 Gbps SAS interface to communicate with the host.
The PM1725a and PM1725b are well suited for read-intensive applications that require high performance, such as databases, virtualization, and data analytics, and can help organizations to improve their IT infrastructure’s performance and scalability.
High Compatibility
The Dell EMC PowerEdge Express Flash NVMe PM1725a and PM1725b solid state drives (SSDs) are designed for use in Dell EMC PowerEdge servers that support the NVMe interface and 12 Gbps SAS interface. They are typically compatible with a wide range of Dell EMC PowerEdge servers that support NVMe, but it’s always recommended to check for compatibility before purchasing.
To check for compatibility, you should consult the server’s technical documentation or the Dell EMC Compatibility Matrix. This will provide a list of compatible hardware, including drives, controllers, and host bus adapters.
You can also check the Dell EMC PowerEdge server’s configuration page on the Dell website for compatibility information. This page will provide information about the server’s features, technical specifications, and supported components.
It’s also important to check for any firmware and driver updates that may be required to support the NVMe SSDs. The Dell EMC PowerEdge servers can be configured and managed using the OpenManage system management software, which can be used to check for and apply firmware and driver updates.
Keep in mind that there might be additional compatibility requirement depend on the use case and environment, like the available bays and backplane of the system. It’s always recommended to check with the server vendor or manufacturer to ensure that a specific SSD is compatible with your system and setup, before making a purchase.
Reliability
The Dell EMC PowerEdge Express Flash NVMe PM1725a and PM1725b solid state drives (SSDs) are designed for high-performance, read-intensive applications and offer high reliability. They have been rigorously tested and are built with high-quality components to ensure long-term reliability and consistent performance.
One of the key features that contribute to the reliability of the PM1725a and PM1725b is their use of advanced error correction code (ECC) algorithms. These algorithms help to detect and correct any errors that may occur during data storage or retrieval, reducing the risk of data loss or corruption.
The drives also feature power-loss protection, which helps to prevent data loss in the event of a power failure. In the event of a power loss, data that was in the process of being written to the drive is stored in an on-board capacitor, and then written to the drive once power is restored.
Furthermore, these drives are built to meet rigorous endurance requirements, the PM1725b has higher endurance compared to PM1725a. Meaning it can sustain more write operations.
As with any storage device, it’s important to implement a robust data backup and recovery strategy to help protect against data loss due to drive failure. Regularly monitoring the health of the drive and any potential issues can also help to prevent problems before they occur.
General Information about this Dell 247G6
- Manufacturer: Dell
- Model Number or SKU# 247G6
- Type: Hot-Swap Solid State Drive
- Interface: SAS-12GBPS
Technical Information for SAS 12GBPS SSD
- Capacity: 7.68TB Storage
- Form Factor: 2.5 Inch
- Nand Flash Memory Type: V-Nand TLC
- Features: Read-Intensive Endurance
Dimensions & Weight of 7.68TB Solid State Drive
- Height: 0.63 inch
- Width: 3.10 inch
- Depth: 5.45 inch
- Weight: 1.50 lbs
Compatibility
- Poweredge R730XD
- Poweredge R830
- Powervault MD1420
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
