Description
Overview of Ecc Registered DDR3 SDRAM 240-Pin
The 3JHRF Dell 64GB is a type of Ecc Registered DDR3 SDRAM 240-Pin memory module. The key specifications of this memory module include a capacity of 64GB, a speed of 1600MHz, and a CAS latency of CL11. The module is ECC (Error Correction Code) registered, which provides enhanced data integrity and error correction, improving system stability and reliability. This memory module is designed to be compatible with Dell server and workstation systems, and can improve multitasking and application performance, as well as enhance virtualization capabilities. This memory module is also designed to provide improved power efficiency, higher clock speeds and CAS latencies, and increased lifespan and durability.
Troubleshooting common issues with Ecc Registered DDR3 SDRAM 240-Pin
- Incorrect installation or configuration of the memory module
- Incompatibility with the system’s motherboard or processor
- Incorrect or outdated BIOS settings
- Conflicting or faulty memory modules
- Overheating or power supply issues
- Memory errors or failures as indicated by diagnostic tools or system crashes
- Inadequate or incorrect memory voltage
- Incorrect memory timing settings
- Limited memory capacity causing system performance issues
- Physical damage to the memory module
- Inadequate cooling for the system
- Interference from other system components or peripherals
- Operating system or driver incompatibility
- Limited memory bandwidth causing system performance issues
- Limited memory capacity causing system to operate in single channel mode.
Compatible systems for Ecc Registered DDR3 SDRAM 240-Pin
Compatible systems for Ecc Registered DDR3 SDRAM 240-Pin would include computer systems that support DDR3 memory and have a 240-pin DIMM slot. This could include servers, workstations, and some desktop computers. It is important to check the system’s manual or technical specifications to confirm compatibility before purchasing and installing the memory. Some systems may also have specific requirements for memory type, such as registered or buffered, and it’s important to match these requirements as well.
Installation and Setup Instructions for Ecc Registered DDR3 SDRAM 240-Pin
Installation and setup instructions for Ecc Registered DDR3 SDRAM 240-Pin would include the following steps:
- Ensure that the computer system is turned off and unplugged from the power source.
- Open the computer’s case to access the memory slots.
- Carefully remove any existing memory modules if necessary.
- Locate the memory slots on the motherboard and align the memory module with the slot.
- Gently press down on the memory module until it clicks into place.
- Close the computer’s case and reconnect the power source.
- Turn on the computer and check the system’s memory configuration to confirm that the new memory has been recognized and is functioning properly.
- If necessary, update the system’s BIOS to ensure compatibility with the new memory.
- Check if the system is stable and run some memory testing software like memtest86+ to ensure the new memory is working as expected.
It is important to note that these instructions are general and may vary depending on the specific computer system and memory module being used. It is always recommended to consult the computer or motherboard’s manual for specific instructions.
General Information
- Manufacturer: Dell
- Manufacturer Part Number: 3JHRF
- Type: Memory (RAM)
- Sub-Type: PC3-10600
- Product Name: 64GB DDR3 SDRAM Memory Module
Technical Information
- Storage Capacity: 64GB
- Memory Technology: DDR3 SDRAM
- Number Of Modules: 8 X 8GB
- Bus Speed: 1333mhz Ddr3-1333/Pc3-10600
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Features: 2rx4, Ultra Low Voltage
- Cas Latency Timings: Cl11
- Voltage: 1.35v